#include <linux/pci.h>
#include "pciehp.h"
#include <linux/interrupt.h>
+#include <linux/time.h>
/* Global variables */
int pciehp_debug;
.get_cur_bus_speed = get_cur_bus_speed,
};
+/*
+ * Check the status of the Electro Mechanical Interlock (EMI)
+ */
+static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+ struct slot *slot = hotplug_slot->private;
+ return (slot->hpc_ops->get_emi_status(slot, value));
+}
+
+/*
+ * sysfs interface for the Electro Mechanical Interlock (EMI)
+ * 1 == locked, 0 == unlocked
+ */
+static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
+{
+ int retval;
+ u8 value;
+
+ retval = get_lock_status(slot, &value);
+ if (retval)
+ goto lock_read_exit;
+ retval = sprintf (buf, "%d\n", value);
+
+lock_read_exit:
+ return retval;
+}
+
+/*
+ * Change the status of the Electro Mechanical Interlock (EMI)
+ * This is a toggle - in addition there must be at least 1 second
+ * in between toggles.
+ */
+static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
+ struct slot *slot = hotplug_slot->private;
+ int retval;
+ u8 value;
+
+ mutex_lock(&slot->ctrl->crit_sect);
+
+ /* has it been >1 sec since our last toggle? */
+ if ((get_seconds() - slot->last_emi_toggle) < 1)
+ return -EINVAL;
+
+ /* see what our current state is */
+ retval = get_lock_status(hotplug_slot, &value);
+ if (retval || (value == status))
+ goto set_lock_exit;
+
+ slot->hpc_ops->toggle_emi(slot);
+set_lock_exit:
+ mutex_unlock(&slot->ctrl->crit_sect);
+ return 0;
+}
+
+/*
+ * sysfs interface which allows the user to toggle the Electro Mechanical
+ * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock
+ */
+static ssize_t lock_write_file(struct hotplug_slot *slot, const char *buf,
+ size_t count)
+{
+ unsigned long llock;
+ u8 lock;
+ int retval = 0;
+
+ llock = simple_strtoul(buf, NULL, 10);
+ lock = (u8)(llock & 0xff);
+
+ switch (lock) {
+ case 0:
+ case 1:
+ retval = set_lock_status(slot, lock);
+ break;
+ default:
+ err ("%d is an invalid lock value\n", lock);
+ retval = -EINVAL;
+ }
+ if (retval)
+ return retval;
+ return count;
+}
+
+static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
+ .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
+ .show = lock_read_file,
+ .store = lock_write_file
+};
+
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
err ("pci_hp_register failed with error %d\n", retval);
goto error_info;
}
+ /* create additional sysfs entries */
+ if (EMI(ctrl->ctrlcap)) {
+ retval = sysfs_create_file(&hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
+ if (retval) {
+ pci_hp_deregister(hotplug_slot);
+ err("cannot create additional sysfs entries\n");
+ goto error_info;
+ }
+ }
list_add(&slot->slot_list, &ctrl->slot_list);
}
list_for_each_safe(tmp, next, &ctrl->slot_list) {
slot = list_entry(tmp, struct slot, slot_list);
list_del(&slot->slot_list);
+ if (EMI(ctrl->ctrlcap))
+ sysfs_remove_file(&slot->hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
pci_hp_deregister(slot->hotplug_slot);
}
}
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err(msg_initialization_err, 6);
+ err("%s: slot initialization failed\n", PCIE_MODULE_NAME);
goto err_out_release_ctlr;
}
pciehp_ctrl_list = ctrl;
}
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-
if ((POWER_CTRL(ctrl->ctrlcap)) && !value) {
rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
- if (rc) {
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
+ if (rc)
goto err_out_free_ctrl_slot;
- } else
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
}
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
-
return 0;
err_out_free_ctrl_slot: