#include <linux/pci.h>
#include "pciehp.h"
#include <linux/interrupt.h>
+#include <linux/time.h>
/* Global variables */
int pciehp_debug;
int pciehp_poll_mode;
int pciehp_poll_time;
int pciehp_force;
-struct controller *pciehp_ctrl_list;
+struct workqueue_struct *pciehp_wq;
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
#define PCIE_MODULE_NAME "pciehp"
-static int pcie_start_thread (void);
static int set_attention_status (struct hotplug_slot *slot, u8 value);
static int enable_slot (struct hotplug_slot *slot);
static int disable_slot (struct hotplug_slot *slot);
.get_cur_bus_speed = get_cur_bus_speed,
};
+/*
+ * Check the status of the Electro Mechanical Interlock (EMI)
+ */
+static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+ struct slot *slot = hotplug_slot->private;
+ return (slot->hpc_ops->get_emi_status(slot, value));
+}
+
+/*
+ * sysfs interface for the Electro Mechanical Interlock (EMI)
+ * 1 == locked, 0 == unlocked
+ */
+static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
+{
+ int retval;
+ u8 value;
+
+ retval = get_lock_status(slot, &value);
+ if (retval)
+ goto lock_read_exit;
+ retval = sprintf (buf, "%d\n", value);
+
+lock_read_exit:
+ return retval;
+}
+
+/*
+ * Change the status of the Electro Mechanical Interlock (EMI)
+ * This is a toggle - in addition there must be at least 1 second
+ * in between toggles.
+ */
+static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
+ struct slot *slot = hotplug_slot->private;
+ int retval;
+ u8 value;
+
+ mutex_lock(&slot->ctrl->crit_sect);
+
+ /* has it been >1 sec since our last toggle? */
+ if ((get_seconds() - slot->last_emi_toggle) < 1)
+ return -EINVAL;
+
+ /* see what our current state is */
+ retval = get_lock_status(hotplug_slot, &value);
+ if (retval || (value == status))
+ goto set_lock_exit;
+
+ slot->hpc_ops->toggle_emi(slot);
+set_lock_exit:
+ mutex_unlock(&slot->ctrl->crit_sect);
+ return 0;
+}
+
+/*
+ * sysfs interface which allows the user to toggle the Electro Mechanical
+ * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock
+ */
+static ssize_t lock_write_file(struct hotplug_slot *slot, const char *buf,
+ size_t count)
+{
+ unsigned long llock;
+ u8 lock;
+ int retval = 0;
+
+ llock = simple_strtoul(buf, NULL, 10);
+ lock = (u8)(llock & 0xff);
+
+ switch (lock) {
+ case 0:
+ case 1:
+ retval = set_lock_status(slot, lock);
+ break;
+ default:
+ err ("%d is an invalid lock value\n", lock);
+ retval = -EINVAL;
+ }
+ if (retval)
+ return retval;
+ return count;
+}
+
+static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
+ .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
+ .show = lock_read_file,
+ .store = lock_write_file
+};
+
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
slot->device = ctrl->slot_device_offset + i;
slot->hpc_ops = ctrl->hpc_ops;
slot->number = ctrl->first_slot;
+ mutex_init(&slot->lock);
+ INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
/* register this slot with the hotplug pci core */
hotplug_slot->private = slot;
err ("pci_hp_register failed with error %d\n", retval);
goto error_info;
}
+ /* create additional sysfs entries */
+ if (EMI(ctrl->ctrlcap)) {
+ retval = sysfs_create_file(&hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
+ if (retval) {
+ pci_hp_deregister(hotplug_slot);
+ err("cannot create additional sysfs entries\n");
+ goto error_info;
+ }
+ }
list_add(&slot->slot_list, &ctrl->slot_list);
}
list_for_each_safe(tmp, next, &ctrl->slot_list) {
slot = list_entry(tmp, struct slot, slot_list);
list_del(&slot->slot_list);
+ if (EMI(ctrl->ctrlcap))
+ sysfs_remove_file(&slot->hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
+ cancel_delayed_work(&slot->work);
+ flush_scheduled_work();
+ flush_workqueue(pciehp_wq);
pci_hp_deregister(slot->hotplug_slot);
}
}
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
hotplug_slot->info->attention_status = status;
-
- if (ATTN_LED(slot->ctrl->ctrlcap))
+
+ if (ATTN_LED(slot->ctrl->ctrlcap))
slot->hpc_ops->set_attention_status(slot, status);
return 0;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
- return pciehp_enable_slot(slot);
+ return pciehp_sysfs_enable_slot(slot);
}
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
- return pciehp_disable_slot(slot);
+ return pciehp_sysfs_disable_slot(slot);
}
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
-
+
retval = slot->hpc_ops->get_max_bus_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
-
+
retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
struct slot *t_slot;
u8 value;
struct pci_dev *pdev;
-
+
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
- /* Finish setting up the hot plug ctrl device */
- ctrl->next_event = 0;
-
- if (!pciehp_ctrl_list) {
- pciehp_ctrl_list = ctrl;
- ctrl->next = NULL;
- } else {
- ctrl->next = pciehp_ctrl_list;
- pciehp_ctrl_list = ctrl;
- }
-
t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
if ((POWER_CTRL(ctrl->ctrlcap)) && !value) {
rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
return -ENODEV;
}
-
-static int pcie_start_thread(void)
+static void pciehp_remove (struct pcie_device *dev)
{
- int retval = 0;
-
- dbg("Initialize + Start the notification/polling mechanism \n");
-
- retval = pciehp_event_start_thread();
- if (retval) {
- dbg("pciehp_event_start_thread() failed\n");
- return retval;
- }
-
- return retval;
-}
-
-static void __exit unload_pciehpd(void)
-{
- struct controller *ctrl;
- struct controller *tctrl;
-
- ctrl = pciehp_ctrl_list;
+ struct pci_dev *pdev = dev->port;
+ struct controller *ctrl = pci_get_drvdata(pdev);
- while (ctrl) {
- cleanup_slots(ctrl);
-
- ctrl->hpc_ops->release_ctlr(ctrl);
-
- tctrl = ctrl;
- ctrl = ctrl->next;
-
- kfree(tctrl);
- }
-
- /* Stop the notification mechanism */
- pciehp_event_stop_thread();
-
-}
-
-static void pciehp_remove (struct pcie_device *device)
-{
- /* XXX - Needs to be adapted to device driver model */
+ cleanup_slots(ctrl);
+ ctrl->hpc_ops->release_ctlr(ctrl);
+ kfree(ctrl);
}
#ifdef CONFIG_PM
static int pciehp_suspend (struct pcie_device *dev, pm_message_t state)
{
- printk("%s ENTRY\n", __FUNCTION__);
+ printk("%s ENTRY\n", __FUNCTION__);
return 0;
}
static int pciehp_resume (struct pcie_device *dev)
{
- printk("%s ENTRY\n", __FUNCTION__);
+ printk("%s ENTRY\n", __FUNCTION__);
return 0;
}
#endif
-static struct pcie_port_service_id port_pci_ids[] = { {
- .vendor = PCI_ANY_ID,
+static struct pcie_port_service_id port_pci_ids[] = { {
+ .vendor = PCI_ANY_ID,
.device = PCI_ANY_ID,
.port_type = PCIE_ANY_PORT,
.service_type = PCIE_PORT_SERVICE_HP,
- .driver_data = 0,
+ .driver_data = 0,
}, { /* end: all zeroes */ }
};
static const char device_name[] = "hpdriver";
{
int retval = 0;
-#ifdef CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
- pciehp_poll_mode = 1;
-#endif
-
- retval = pcie_start_thread();
- if (retval)
- goto error_hpc_init;
-
retval = pcie_port_service_register(&hpdriver_portdrv);
dbg("pcie_port_service_register = %d\n", retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
if (retval)
dbg("%s: Failure to register service\n", __FUNCTION__);
-
-error_hpc_init:
- if (retval) {
- pciehp_event_stop_thread();
- };
-
return retval;
}
static void __exit pcied_cleanup(void)
{
dbg("unload_pciehpd()\n");
- unload_pciehpd();
-
pcie_port_service_unregister(&hpdriver_portdrv);
-
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
}
projects / linux-2.6 / blobdiff