#include "pci_hotplug.h"
#include "cpci_hotplug.h"
-#if !defined(MODULE)
#define MY_NAME "cpci_hotplug"
-#else
-#define MY_NAME THIS_MODULE->name
-#endif
extern int cpci_debug;
return hs_csr;
}
-#if 0
-u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr)
-{
- int hs_cap;
- u16 new_hs_csr;
-
- hs_cap = pci_bus_find_capability(slot->bus,
- slot->devfn,
- PCI_CAP_ID_CHSWP);
- if(!hs_cap) {
- return 0xFFFF;
- }
-
- /* Write out the new value */
- if(pci_bus_write_config_word(slot->bus,
- slot->devfn,
- hs_cap + 2,
- hs_csr)) {
- return 0xFFFF;
- }
-
- /* Read back what we just wrote out */
- if(pci_bus_read_config_word(slot->bus,
- slot->devfn,
- hs_cap + 2,
- &new_hs_csr)) {
- return 0xFFFF;
- }
- return new_hs_csr;
-}
-#endif
-
int cpci_check_and_clear_ins(struct slot* slot)
{
int hs_cap;
return -ENODEV;
}
if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
- /* Set LOO */
hs_csr |= HS_CSR_LOO;
if(pci_bus_write_config_word(slot->bus,
slot->devfn,
return -ENODEV;
}
if(hs_csr & HS_CSR_LOO) {
- /* Clear LOO */
hs_csr &= ~HS_CSR_LOO;
if(pci_bus_write_config_word(slot->bus,
slot->devfn,
* Device configuration functions
*/
-static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev)
-{
- u8 irq_pin;
- int r;
-
- dbg("%s - enter", __FUNCTION__);
-
- /* NOTE: device already setup from prior scan */
-
- /* FIXME: How would we know if we need to enable the expansion ROM? */
- pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L);
-
- /* Assign resources */
- dbg("assigning resources for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- for (r = 0; r < 6; r++) {
- struct resource *res = dev->resource + r;
- if(res->flags)
- pci_assign_resource(dev, r);
- }
- dbg("finished assigning resources for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-
- /* Does this function have an interrupt at all? */
- dbg("checking for function interrupt");
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin);
- if(irq_pin) {
- dbg("function uses interrupt pin %d", irq_pin);
- }
-
- /*
- * Need to explicitly set irq field to 0 so that it'll get assigned
- * by the pcibios platform dependent code called by pci_enable_device.
- */
- dev->irq = 0;
-
- dbg("enabling device");
- pci_enable_device(dev); /* XXX check return */
- dbg("now dev->irq = %d", dev->irq);
- if(irq_pin && dev->irq) {
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
-
- /* Can't use pci_insert_device at the moment, do it manually for now */
- pci_proc_attach_device(dev);
- dbg("notifying drivers");
- //pci_announce_device_to_drivers(dev);
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev)
+static void cpci_enable_device(struct pci_dev *dev)
{
- int rc;
- struct pci_bus* child;
- struct resource* r;
- u8 max, n;
- u16 command;
-
- dbg("%s - enter", __FUNCTION__);
+ struct pci_bus *bus;
- /* Do basic bridge initialization */
- rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__);
- }
- rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__);
- }
- rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4);
- if(rc) {
- printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__);
- }
-
- /*
- * Set parent bridge's subordinate field so that configuration space
- * access will work in pci_scan_bridge and friends.
- */
- max = pci_max_busnr();
- bus->subordinate = max + 1;
- pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1);
-
- /* Scan behind bridge */
- n = pci_scan_bridge(bus, dev, max, 2);
- child = pci_find_bus(0, max + 1);
- if (!child)
- return -ENODEV;
- pci_proc_attach_bus(child);
-
- /*
- * Update parent bridge's subordinate field if there were more bridges
- * behind the bridge that was scanned.
- */
- if(n > max) {
- bus->subordinate = n;
- pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n);
- }
-
- /*
- * Update the bridge resources of the bridge to accommodate devices
- * behind it.
- */
- pci_bus_size_bridges(child);
- pci_bus_assign_resources(child);
-
- /* Enable resource mapping via command register */
- command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- r = child->resource[0];
- if(r && r->start) {
- command |= PCI_COMMAND_IO;
- }
- r = child->resource[1];
- if(r && r->start) {
- command |= PCI_COMMAND_MEMORY;
- }
- r = child->resource[2];
- if(r && r->start) {
- command |= PCI_COMMAND_MEMORY;
- }
- rc = pci_write_config_word(dev, PCI_COMMAND, command);
- if(rc) {
- err("Error setting command register");
- return rc;
- }
-
- /* Set bridge control register */
- command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA;
- rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command);
- if(rc) {
- err("Error setting bridge control register");
- return rc;
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_bus)
-{
- int rc;
- struct pci_dev *dev = wrapped_dev->dev;
- struct pci_bus *bus = wrapped_bus->bus;
- struct slot* slot;
-
- dbg("%s - enter", __FUNCTION__);
-
- /*
- * We need to fix up the hotplug representation with the Linux
- * representation.
- */
- if(wrapped_dev->data) {
- slot = (struct slot*) wrapped_dev->data;
- slot->dev = dev;
- }
-
- /* If it's a bridge, scan behind it for devices */
+ pci_enable_device(dev);
if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- rc = cpci_configure_bridge(bus, dev);
- if(rc)
- return rc;
- }
-
- /* Actually configure device */
- if(dev) {
- rc = cpci_configure_dev(bus, dev);
- if(rc)
- return rc;
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev,
- struct pci_bus_wrapped *wrapped_bus)
-{
- struct pci_dev *dev = wrapped_dev->dev;
- struct slot* slot;
-
- dbg("%s - enter", __FUNCTION__);
- if(!dev)
- return -ENODEV;
-
- /* Remove the Linux representation */
- if(pci_remove_device_safe(dev)) {
- err("Could not remove device\n");
- return -1;
- }
-
- /*
- * Now remove the hotplug representation.
- */
- if(wrapped_dev->data) {
- slot = (struct slot*) wrapped_dev->data;
- slot->dev = NULL;
- } else {
- dbg("No hotplug representation for %02x:%02x.%x",
- dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- }
- dbg("%s - exit", __FUNCTION__);
- return 0;
-}
-
-static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus,
- struct pci_dev_wrapped *wrapped_dev)
-{
- struct pci_bus *bus = wrapped_bus->bus;
- struct pci_bus *parent = bus->self->bus;
-
- dbg("%s - enter", __FUNCTION__);
-
- /* The cleanup code for proc entries regarding buses should be in the kernel... */
- if(bus->procdir)
- dbg("detach_pci_bus %s", bus->procdir->name);
- pci_proc_detach_bus(bus);
-
- /* The cleanup code should live in the kernel... */
- bus->self->subordinate = NULL;
-
- /* unlink from parent bus */
- list_del(&bus->node);
-
- /* Now, remove */
- if(bus)
- kfree(bus);
-
- /* Update parent's subordinate field */
- if(parent) {
- u8 n = pci_bus_max_busnr(parent);
- if(n < parent->subordinate) {
- parent->subordinate = n;
- pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n);
+ bus = dev->subordinate;
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ cpci_enable_device(dev);
}
}
- dbg("%s - exit", __FUNCTION__);
- return 0;
}
-static struct pci_visit configure_functions = {
- .visit_pci_dev = configure_visit_pci_dev,
-};
-
-static struct pci_visit unconfigure_functions_phase2 = {
- .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2,
- .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2
-};
-
-
int cpci_configure_slot(struct slot* slot)
{
- int rc = 0;
+ unsigned char busnr;
+ struct pci_bus *child;
dbg("%s - enter", __FUNCTION__);
slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
if(slot->dev == NULL) {
err("Could not find PCI device for slot %02x", slot->number);
- return 0;
+ return 1;
}
}
- dbg("slot->dev = %p", slot->dev);
- if(slot->dev) {
- struct pci_dev *dev;
- struct pci_dev_wrapped wrapped_dev;
- struct pci_bus_wrapped wrapped_bus;
- int i;
-
- memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
- memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
- for (i = 0; i < 8; i++) {
- dev = pci_find_slot(slot->bus->number,
- PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i));
- if(!dev)
- continue;
- wrapped_dev.dev = dev;
- wrapped_bus.bus = slot->dev->bus;
- if(i)
- wrapped_dev.data = NULL;
- else
- wrapped_dev.data = (void*) slot;
- rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus);
- }
+
+ if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr);
+ child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr);
+ pci_do_scan_bus(child);
+ pci_bus_size_bridges(child);
}
- dbg("%s - exit, rc = %d", __FUNCTION__, rc);
- return rc;
+ pci_bus_assign_resources(slot->dev->bus);
+
+ cpci_enable_device(slot->dev);
+
+ dbg("%s - exit", __FUNCTION__);
+ return 0;
}
int cpci_unconfigure_slot(struct slot* slot)
{
- int rc = 0;
int i;
- struct pci_dev_wrapped wrapped_dev;
- struct pci_bus_wrapped wrapped_bus;
struct pci_dev *dev;
dbg("%s - enter", __FUNCTION__);
-
if(!slot->dev) {
err("No device for slot %02x\n", slot->number);
return -ENODEV;
}
- memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped));
- memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped));
-
for (i = 0; i < 8; i++) {
dev = pci_find_slot(slot->bus->number,
PCI_DEVFN(PCI_SLOT(slot->devfn), i));
if(dev) {
- wrapped_dev.dev = dev;
- wrapped_bus.bus = dev->bus;
- if(i)
- wrapped_dev.data = NULL;
- else
- wrapped_dev.data = (void*) slot;
- dbg("%s - unconfigure phase 2", __FUNCTION__);
- rc = pci_visit_dev(&unconfigure_functions_phase2,
- &wrapped_dev,
- &wrapped_bus);
- if(rc)
- break;
+ pci_remove_bus_device(dev);
+ slot->dev = NULL;
}
}
- dbg("%s - exit, rc = %d", __FUNCTION__, rc);
- return rc;
+ dbg("%s - exit", __FUNCTION__);
+ return 0;
}
projects / linux-2.6 / blobdiff