static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
static void acpiphp_sanitize_bus(struct pci_bus *bus);
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
+static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context);
/*
}
}
+/* callback routine to check for the existance of a pci dock device */
+static acpi_status
+is_pci_dock_device(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int *count = (int *)context;
+
+ if (is_dock_device(handle)) {
+ (*count)++;
+ return AE_CTRL_TERMINATE;
+ } else {
+ return AE_OK;
+ }
+}
+
+
+
+
+/*
+ * the _DCK method can do funny things... and sometimes not
+ * hah-hah funny.
+ *
+ * TBD - figure out a way to only call fixups for
+ * systems that require them.
+ */
+static int post_dock_fixups(struct notifier_block *nb, unsigned long val,
+ void *v)
+{
+ struct acpiphp_func *func = container_of(nb, struct acpiphp_func, nb);
+ struct pci_bus *bus = func->slot->bridge->pci_bus;
+ u32 buses;
+
+ if (!bus->self)
+ return NOTIFY_OK;
+
+ /* fixup bad _DCK function that rewrites
+ * secondary bridge on slot
+ */
+ pci_read_config_dword(bus->self,
+ PCI_PRIMARY_BUS,
+ &buses);
+
+ if (((buses >> 8) & 0xff) != bus->secondary) {
+ buses = (buses & 0xff000000)
+ | ((unsigned int)(bus->primary) << 0)
+ | ((unsigned int)(bus->secondary) << 8)
+ | ((unsigned int)(bus->subordinate) << 16);
+ pci_write_config_dword(bus->self, PCI_PRIMARY_BUS, buses);
+ }
+ return NOTIFY_OK;
+}
+
+
+
/* callback routine to register each ACPI PCI slot object */
static acpi_status
struct acpiphp_bridge *bridge = (struct acpiphp_bridge *)context;
struct acpiphp_slot *slot;
struct acpiphp_func *newfunc;
- struct dependent_device *dd;
acpi_handle tmp;
acpi_status status = AE_OK;
unsigned long adr, sun;
status = acpi_get_handle(handle, "_EJ0", &tmp);
- if (ACPI_FAILURE(status) && !(is_dependent_device(handle)))
+ if (ACPI_FAILURE(status) && !(is_dock_device(handle)))
return AE_OK;
device = (adr >> 16) & 0xffff;
if (ACPI_SUCCESS(acpi_get_handle(handle, "_PS3", &tmp)))
newfunc->flags |= FUNC_HAS_PS3;
- if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp))) {
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_DCK", &tmp)))
newfunc->flags |= FUNC_HAS_DCK;
- /* add to devices dependent on dock station,
- * because this may actually be the dock bridge
- */
- dd = alloc_dependent_device(handle);
- if (!dd)
- err("Can't allocate memory for "
- "new dependent device!\n");
- else
- add_dependent_device(dd);
- }
status = acpi_evaluate_integer(handle, "_SUN", NULL, &sun);
- if (ACPI_FAILURE(status))
- sun = -1;
+ if (ACPI_FAILURE(status)) {
+ /*
+ * use the count of the number of slots we've found
+ * for the number of the slot
+ */
+ sun = bridge->nr_slots+1;
+ }
/* search for objects that share the same slot */
for (slot = bridge->slots; slot; slot = slot->next)
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
}
- /* if this is a device dependent on a dock station,
- * associate the acpiphp_func to the dependent_device
- * struct.
- */
- if ((dd = get_dependent_device(handle))) {
- newfunc->flags |= FUNC_IS_DD;
- /*
- * we don't want any devices which is dependent
- * on the dock to have it's _EJ0 method executed.
- * because we need to run _DCK first.
+ if (is_dock_device(handle)) {
+ /* we don't want to call this device's _EJ0
+ * because we want the dock notify handler
+ * to call it after it calls _DCK
*/
newfunc->flags &= ~FUNC_HAS_EJ0;
- dd->func = newfunc;
- add_pci_dependent_device(dd);
+ if (register_hotplug_dock_device(handle,
+ handle_hotplug_event_func, newfunc))
+ dbg("failed to register dock device\n");
+
+ /* we need to be notified when dock events happen
+ * outside of the hotplug operation, since we may
+ * need to do fixups before we can hotplug.
+ */
+ newfunc->nb.notifier_call = post_dock_fixups;
+ if (register_dock_notifier(&newfunc->nb))
+ dbg("failed to register a dock notifier");
}
/* install notify handler */
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle, (u32)1,
is_ejectable_slot, (void *)&count, NULL);
+ /*
+ * we also need to add this bridge if there is a dock bridge or
+ * other pci device on a dock station (removable)
+ */
+ if (!count)
+ status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge_handle,
+ (u32)1, is_pci_dock_device, (void *)&count,
+ NULL);
+
return count;
}
{
acpi_status status;
- status = acpi_get_hp_params_from_firmware(bridge->pci_dev, &bridge->hpp);
- if (ACPI_FAILURE(status)) {
+ status = acpi_get_hp_params_from_firmware(bridge->pci_bus, &bridge->hpp);
+ if (ACPI_FAILURE(status) ||
+ !bridge->hpp.t0 || (bridge->hpp.t0->revision > 1)) {
/* use default numbers */
- bridge->hpp.cache_line_size = 0x10;
- bridge->hpp.latency_timer = 0x40;
- bridge->hpp.enable_serr = 0;
- bridge->hpp.enable_perr = 0;
+ printk(KERN_WARNING
+ "%s: Could not get hotplug parameters. Use defaults\n",
+ __FUNCTION__);
+ bridge->hpp.t0 = &bridge->hpp.type0_data;
+ bridge->hpp.t0->revision = 0;
+ bridge->hpp.t0->cache_line_size = 0x10;
+ bridge->hpp.t0->latency_timer = 0x40;
+ bridge->hpp.t0->enable_serr = 0;
+ bridge->hpp.t0->enable_perr = 0;
}
}
goto out;
/* check if this bridge has ejectable slots */
- if ((detect_ejectable_slots(handle) > 0) ||
- (detect_dependent_devices(handle) > 0)) {
+ if ((detect_ejectable_slots(handle) > 0)) {
dbg("found PCI-to-PCI bridge at PCI %s\n", pci_name(dev));
add_p2p_bridge(handle, dev);
}
list_for_each_safe (list, tmp, &slot->funcs) {
struct acpiphp_func *func;
func = list_entry(list, struct acpiphp_func, sibling);
+ if (is_dock_device(func->handle)) {
+ unregister_hotplug_dock_device(func->handle);
+ unregister_dock_notifier(&func->nb);
+ }
if (!(func->flags & FUNC_HAS_DCK)) {
status = acpi_remove_notify_handler(func->handle,
ACPI_SYSTEM_NOTIFY,
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
+
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
- bridge->hpp.cache_line_size);
+ bridge->hpp.t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
- bridge->hpp.latency_timer);
+ bridge->hpp.t0->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
- if (bridge->hpp.enable_serr)
+ if (bridge->hpp.t0->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
- if (bridge->hpp.enable_perr)
+ if (bridge->hpp.t0->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
/* Program bridge control value and child devices */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
- bridge->hpp.latency_timer);
+ bridge->hpp.t0->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
- if (bridge->hpp.enable_serr)
+ if (bridge->hpp.t0->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
- if (bridge->hpp.enable_perr)
+ if (bridge->hpp.t0->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
memset(&bridge, 0, sizeof(bridge));
bridge.handle = handle;
+ bridge.pci_bus = bus;
bridge.pci_dev = bus->self;
decode_hpp(&bridge);
list_for_each_entry(dev, &bus->devices, bus_list)
* handles ACPI event notification on slots
*
*/
-void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
+static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
{
struct acpiphp_func *func;
char objname[64];