return 0;
}
-static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
- u16 eeprom;
- u8 reg_id;
u8 value;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt73usb_bbp_read(rt2x00dev, 0, &value);
if ((value != 0xff) && (value != 0x00))
- goto continue_csr_init;
- NOTICE(rt2x00dev, "Waiting for BBP register.\n");
+ return 0;
udelay(REGISTER_BUSY_DELAY);
}
ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
return -EACCES;
+}
+
+static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 reg_id;
+ u8 value;
+
+ if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev)))
+ return -EACCES;
-continue_csr_init:
rt73usb_bbp_write(rt2x00dev, 3, 0x80);
rt73usb_bbp_write(rt2x00dev, 15, 0x30);
rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®);
rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX,
- state == STATE_RADIO_RX_OFF);
+ (state == STATE_RADIO_RX_OFF) ||
+ (state == STATE_RADIO_RX_OFF_LINK));
rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
}
/*
* Initialize all registers.
*/
- if (rt73usb_init_registers(rt2x00dev) ||
- rt73usb_init_bbp(rt2x00dev)) {
- ERROR(rt2x00dev, "Register initialization failed.\n");
+ if (unlikely(rt73usb_init_registers(rt2x00dev) ||
+ rt73usb_init_bbp(rt2x00dev)))
return -EIO;
- }
return 0;
}
u32 reg;
unsigned int i;
char put_to_sleep;
- char current_state;
put_to_sleep = (state != STATE_AWAKE);
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt73usb_register_read(rt2x00dev, MAC_CSR12, ®);
- current_state =
- rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
- if (current_state == !put_to_sleep)
+ state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
+ if (state == !put_to_sleep)
return 0;
msleep(10);
}
- NOTICE(rt2x00dev, "Device failed to enter state %d, "
- "current device state %d.\n", !put_to_sleep, current_state);
-
return -EBUSY;
}
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
- rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
- break;
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
- rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt73usb_toggle_rx(rt2x00dev, state);
+ break;
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ /* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
break;
}
+ if (unlikely(retval))
+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+ state, retval);
+
return retval;
}
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd = (__le32 *)entry->skb->data;
- unsigned int offset = entry->queue->desc_size + 2;
u32 word0;
u32 word1;
/*
- * Copy descriptor to the available headroom inside the skbuffer.
+ * Copy descriptor to the skb->cb array, this has 2 benefits:
+ * 1) Each descriptor word is 4 byte aligned.
+ * 2) Descriptor is safe from moving of frame data in rt2x00usb.
*/
- skb_push(entry->skb, offset);
- memcpy(entry->skb->data, rxd, entry->queue->desc_size);
- rxd = (__le32 *)entry->skb->data;
+ skbdesc->desc_len =
+ min_t(u16, entry->queue->desc_size, sizeof(entry->skb->cb));
+ memcpy(entry->skb->cb, rxd, skbdesc->desc_len);
+ skbdesc->desc = entry->skb->cb;
+ rxd = (__le32 *)skbdesc->desc;
/*
- * The descriptor is now aligned to 4 bytes and thus it is
- * now safe to read it on all architectures.
+ * It is now safe to read the descriptor on all architectures.
*/
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
- rxdesc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- rxdesc->dev_flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
/*
- * Adjust the skb memory window to the frame boundaries.
+ * Set skb pointers, and update frame information.
*/
- skb_pull(entry->skb, offset + entry->queue->desc_size);
+ skb_pull(entry->skb, entry->queue->desc_size);
skb_trim(entry->skb, rxdesc->size);
-
- /*
- * Set descriptor and data pointer.
- */
skbdesc->data = entry->skb->data;
skbdesc->data_len = rxdesc->size;
- skbdesc->desc = rxd;
- skbdesc->desc_len = entry->queue->desc_size;
}
/*
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
- rt2x00dev->hw->queues = 4;
SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
#define rt73usb_get_tsf NULL
#endif
-static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ieee80211_tx_control *control)
+static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
- struct rt2x00_intf *intf = vif_to_intf(control->vif);
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+ struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
struct skb_frame_desc *skbdesc;
+ struct txentry_desc txdesc;
unsigned int beacon_base;
u32 reg;
if (unlikely(!intf->beacon))
return -ENOBUFS;
+ /*
+ * Copy all TX descriptor information into txdesc,
+ * after that we are free to use the skb->cb array
+ * for our information.
+ */
+ intf->beacon->skb = skb;
+ rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc);
+
/*
* Add the descriptor in front of the skb.
*/
* Write entire beacon with descriptor to register,
* and kick the beacon generator.
*/
- rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
+ rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, beacon_base, 0,
.entry_num = RX_ENTRIES,
.data_size = DATA_FRAME_SIZE,
.desc_size = RXD_DESC_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_rx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct data_queue_desc rt73usb_queue_tx = {
.entry_num = TX_ENTRIES,
.data_size = DATA_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_tx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct data_queue_desc rt73usb_queue_bcn = {
.entry_num = 4 * BEACON_ENTRIES,
.data_size = MGMT_FRAME_SIZE,
.desc_size = TXINFO_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_tx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct rt2x00_ops rt73usb_ops = {
.max_ap_intf = 4,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
.rx = &rt73usb_queue_rx,
.tx = &rt73usb_queue_tx,
.bcn = &rt73usb_queue_bcn,
projects / linux-2.6 / blobdiff