/*
- Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
void *buffer, const u16 buffer_length,
const int timeout)
{
- struct usb_device *usb_dev =
- interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
+ struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
int status;
unsigned int i;
unsigned int pipe =
/*
* Check for Cache availability.
*/
- if (unlikely(!rt2x00dev->csr_cache || buffer_length > CSR_CACHE_SIZE)) {
+ if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) {
ERROR(rt2x00dev, "CSR cache not available.\n");
return -ENOMEM;
}
if (requesttype == USB_VENDOR_REQUEST_OUT)
- memcpy(rt2x00dev->csr_cache, buffer, buffer_length);
+ memcpy(rt2x00dev->csr.cache, buffer, buffer_length);
status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype,
- offset, 0, rt2x00dev->csr_cache,
+ offset, 0, rt2x00dev->csr.cache,
buffer_length, timeout);
if (!status && requesttype == USB_VENDOR_REQUEST_IN)
- memcpy(buffer, rt2x00dev->csr_cache, buffer_length);
+ memcpy(buffer, rt2x00dev->csr.cache, buffer_length);
return status;
}
*/
static void rt2x00usb_interrupt_txdone(struct urb *urb)
{
- struct data_entry *entry = (struct data_entry *)urb->context;
- struct data_ring *ring = entry->ring;
- struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
+ struct queue_entry *entry = (struct queue_entry *)urb->context;
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
+ struct txdone_entry_desc txdesc;
__le32 *txd = (__le32 *)entry->skb->data;
u32 word;
- int tx_status;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
- !__test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
+ !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
rt2x00_desc_read(txd, 0, &word);
/*
* Remove the descriptor data from the buffer.
*/
- skb_pull(entry->skb, ring->desc_size);
+ skb_pull(entry->skb, entry->queue->desc_size);
/*
* Obtain the status about this packet.
+ * Note that when the status is 0 it does not mean the
+ * frame was send out correctly. It only means the frame
+ * was succesfully pushed to the hardware, we have no
+ * way to determine the transmission status right now.
+ * (Only indirectly by looking at the failed TX counters
+ * in the register).
*/
- tx_status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY;
+ if (!urb->status)
+ __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
+ else
+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
+ txdesc.retry = 0;
+ txdesc.control = &priv_tx->control;
- rt2x00lib_txdone(entry, tx_status, 0);
+ rt2x00lib_txdone(entry, &txdesc);
/*
* Make this entry available for reuse.
*/
entry->flags = 0;
- rt2x00_ring_index_done_inc(entry->ring);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
/*
- * If the data ring was full before the txdone handler
+ * If the data queue was full before the txdone handler
* we must make sure the packet queue in the mac80211 stack
* is reenabled when the txdone handler has finished.
*/
- if (!rt2x00_ring_full(ring))
- ieee80211_wake_queue(rt2x00dev->hw,
- entry->tx_status.control.queue);
+ if (!rt2x00queue_full(entry->queue))
+ ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue);
}
int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
- struct data_ring *ring, struct sk_buff *skb,
+ struct data_queue *queue, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
- struct usb_device *usb_dev =
- interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
- struct data_entry *entry = rt2x00_get_data_entry(ring);
- struct skb_desc *desc;
+ struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+ struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
+ struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data;
+ struct skb_frame_desc *skbdesc;
u32 length;
- if (rt2x00_ring_full(ring))
+ if (rt2x00queue_full(queue))
return -EINVAL;
- if (test_bit(ENTRY_OWNER_NIC, &entry->flags)) {
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
ERROR(rt2x00dev,
"Arrived at non-free entry in the non-full queue %d.\n"
"Please file bug report to %s.\n",
- control->queue, DRV_PROJECT);
+ entry->queue->qid, DRV_PROJECT);
return -EINVAL;
}
/*
* Add the descriptor in front of the skb.
*/
- skb_push(skb, ring->desc_size);
- memset(skb->data, 0, ring->desc_size);
+ skb_push(skb, queue->desc_size);
+ memset(skb->data, 0, queue->desc_size);
/*
* Fill in skb descriptor
*/
- desc = get_skb_desc(skb);
- desc->desc_len = ring->desc_size;
- desc->data_len = skb->len - ring->desc_size;
- desc->desc = skb->data;
- desc->data = skb->data + ring->desc_size;
- desc->ring = ring;
- desc->entry = entry;
+ skbdesc = get_skb_frame_desc(skb);
+ skbdesc->data = skb->data + queue->desc_size;
+ skbdesc->data_len = skb->len - queue->desc_size;
+ skbdesc->desc = skb->data;
+ skbdesc->desc_len = queue->desc_size;
+ skbdesc->entry = entry;
+ memcpy(&priv_tx->control, control, sizeof(priv_tx->control));
rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
/*
/*
* Initialize URB and send the frame to the device.
*/
- __set_bit(ENTRY_OWNER_NIC, &entry->flags);
- usb_fill_bulk_urb(entry->priv, usb_dev, usb_sndbulkpipe(usb_dev, 1),
+ __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ usb_fill_bulk_urb(priv_tx->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1),
skb->data, length, rt2x00usb_interrupt_txdone, entry);
- usb_submit_urb(entry->priv, GFP_ATOMIC);
+ usb_submit_urb(priv_tx->urb, GFP_ATOMIC);
- rt2x00_ring_index_inc(ring);
+ rt2x00queue_index_inc(queue, Q_INDEX);
return 0;
}
/*
* RX data handlers.
*/
+static struct sk_buff* rt2x00usb_alloc_rxskb(struct data_queue *queue)
+{
+ struct sk_buff *skb;
+ unsigned int frame_size;
+
+ /*
+ * As alignment we use 2 and not NET_IP_ALIGN because we need
+ * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN
+ * can be 0 on some hardware). We use these 2 bytes for frame
+ * alignment later, we assume that the chance that
+ * header_size % 4 == 2 is bigger then header_size % 2 == 0
+ * and thus optimize alignment by reserving the 2 bytes in
+ * advance.
+ */
+ frame_size = queue->data_size + queue->desc_size;
+ skb = dev_alloc_skb(queue->desc_size + frame_size + 2);
+ if (!skb)
+ return NULL;
+
+ skb_reserve(skb, queue->desc_size + 2);
+ skb_put(skb, frame_size);
+
+ return skb;
+}
+
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
{
- struct data_entry *entry = (struct data_entry *)urb->context;
- struct data_ring *ring = entry->ring;
- struct rt2x00_dev *rt2x00dev = ring->rt2x00dev;
+ struct queue_entry *entry = (struct queue_entry *)urb->context;
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct sk_buff *skb;
- struct ieee80211_hdr *hdr;
- struct skb_desc *skbdesc;
- struct rxdata_entry_desc desc;
+ struct skb_frame_desc *skbdesc;
+ struct rxdone_entry_desc rxdesc;
int header_size;
- int frame_size;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
- !test_and_clear_bit(ENTRY_OWNER_NIC, &entry->flags))
+ !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
* to be actually valid, or if the urb is signaling
* a problem.
*/
- if (urb->actual_length < entry->ring->desc_size || urb->status)
+ if (urb->actual_length < entry->queue->desc_size || urb->status)
goto skip_entry;
- memset(&desc, 0, sizeof(desc));
- rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
-
/*
- * Allocate a new sk buffer to replace the current one.
- * If allocation fails, we should drop the current frame
- * so we can recycle the existing sk buffer for the new frame.
- * As alignment we use 2 and not NET_IP_ALIGN because we need
- * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN
- * can be 0 on some hardware). We use these 2 bytes for frame
- * alignment later, we assume that the chance that
- * header_size % 4 == 2 is bigger then header_size % 2 == 0
- * and thus optimize alignment by reserving the 2 bytes in
- * advance.
+ * Fill in skb descriptor
*/
- frame_size = entry->ring->data_size + entry->ring->desc_size;
- skb = dev_alloc_skb(frame_size + 2);
- if (!skb)
- goto skip_entry;
+ skbdesc = get_skb_frame_desc(entry->skb);
+ memset(skbdesc, 0, sizeof(*skbdesc));
+ skbdesc->entry = entry;
- skb_reserve(skb, 2);
- skb_put(skb, frame_size);
+ memset(&rxdesc, 0, sizeof(rxdesc));
+ rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
/*
* The data behind the ieee80211 header must be
* aligned on a 4 byte boundary.
- * After that trim the entire buffer down to only
- * contain the valid frame data excluding the device
- * descriptor.
*/
- hdr = (struct ieee80211_hdr *)entry->skb->data;
- header_size =
- ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control));
-
+ header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
if (header_size % 4 == 0) {
skb_push(entry->skb, 2);
- memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2);
+ memmove(entry->skb->data, entry->skb->data + 2,
+ entry->skb->len - 2);
+ skbdesc->data = entry->skb->data;
+ skb_trim(entry->skb,entry->skb->len - 2);
}
- skb_trim(entry->skb, desc.size);
/*
- * Fill in skb descriptor
+ * Allocate a new sk buffer to replace the current one.
+ * If allocation fails, we should drop the current frame
+ * so we can recycle the existing sk buffer for the new frame.
*/
- skbdesc = get_skb_desc(entry->skb);
- skbdesc->desc_len = entry->ring->desc_size;
- skbdesc->data_len = entry->skb->len;
- skbdesc->ring = ring;
- skbdesc->entry = entry;
+ skb = rt2x00usb_alloc_rxskb(entry->queue);
+ if (!skb)
+ goto skip_entry;
/*
* Send the frame to rt2x00lib for further processing.
*/
- rt2x00lib_rxdone(entry, entry->skb, &desc);
+ rt2x00lib_rxdone(entry, &rxdesc);
/*
* Replace current entry's skb with the newly allocated one,
urb->transfer_buffer_length = entry->skb->len;
skip_entry:
- if (test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags)) {
- __set_bit(ENTRY_OWNER_NIC, &entry->flags);
+ if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) {
+ __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
usb_submit_urb(urb, GFP_ATOMIC);
}
- rt2x00_ring_index_inc(ring);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX);
}
/*
*/
void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
- struct data_ring *ring;
+ struct queue_entry_priv_usb_rx *priv_rx;
+ struct queue_entry_priv_usb_tx *priv_tx;
+ struct queue_entry_priv_usb_bcn *priv_bcn;
+ struct data_queue *queue;
unsigned int i;
- rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000,
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
REGISTER_TIMEOUT);
/*
- * Cancel all rings.
+ * Cancel all queues.
*/
- ring_for_each(rt2x00dev, ring) {
- for (i = 0; i < ring->stats.limit; i++)
- usb_kill_urb(ring->entry[i].priv);
+ for (i = 0; i < rt2x00dev->rx->limit; i++) {
+ priv_rx = rt2x00dev->rx->entries[i].priv_data;
+ usb_kill_urb(priv_rx->urb);
+ }
+
+ tx_queue_for_each(rt2x00dev, queue) {
+ for (i = 0; i < queue->limit; i++) {
+ priv_tx = queue->entries[i].priv_data;
+ usb_kill_urb(priv_tx->urb);
+ }
+ }
+
+ for (i = 0; i < rt2x00dev->bcn->limit; i++) {
+ priv_bcn = rt2x00dev->bcn->entries[i].priv_data;
+ usb_kill_urb(priv_bcn->urb);
+
+ if (priv_bcn->guardian_urb)
+ usb_kill_urb(priv_bcn->guardian_urb);
+ }
+
+ if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags))
+ return;
+
+ for (i = 0; i < rt2x00dev->bcn[1].limit; i++) {
+ priv_tx = rt2x00dev->bcn[1].entries[i].priv_data;
+ usb_kill_urb(priv_tx->urb);
}
}
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
* Device initialization handlers.
*/
void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
- struct data_entry *entry)
+ struct queue_entry *entry)
{
- struct usb_device *usb_dev =
- interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
+ struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
+ struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data;
- usb_fill_bulk_urb(entry->priv, usb_dev,
+ usb_fill_bulk_urb(priv_rx->urb, usb_dev,
usb_rcvbulkpipe(usb_dev, 1),
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
- __set_bit(ENTRY_OWNER_NIC, &entry->flags);
- usb_submit_urb(entry->priv, GFP_ATOMIC);
+ __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ usb_submit_urb(priv_rx->urb, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry);
void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev,
- struct data_entry *entry)
+ struct queue_entry *entry)
{
entry->flags = 0;
}
EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry);
static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev,
- struct data_ring *ring)
+ struct data_queue *queue)
{
+ struct queue_entry_priv_usb_rx *priv_rx;
+ struct queue_entry_priv_usb_tx *priv_tx;
+ struct queue_entry_priv_usb_bcn *priv_bcn;
+ struct urb *urb;
+ unsigned int guardian =
+ test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
unsigned int i;
/*
* Allocate the URB's
*/
- for (i = 0; i < ring->stats.limit; i++) {
- ring->entry[i].priv = usb_alloc_urb(0, GFP_KERNEL);
- if (!ring->entry[i].priv)
+ for (i = 0; i < queue->limit; i++) {
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
return -ENOMEM;
+
+ if (queue->qid == QID_RX) {
+ priv_rx = queue->entries[i].priv_data;
+ priv_rx->urb = urb;
+ } else if (queue->qid == QID_MGMT && guardian) {
+ priv_bcn = queue->entries[i].priv_data;
+ priv_bcn->urb = urb;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+
+ priv_bcn->guardian_urb = urb;
+ } else {
+ priv_tx = queue->entries[i].priv_data;
+ priv_tx->urb = urb;
+ }
}
return 0;
}
static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev,
- struct data_ring *ring)
+ struct data_queue *queue)
{
+ struct queue_entry_priv_usb_rx *priv_rx;
+ struct queue_entry_priv_usb_tx *priv_tx;
+ struct queue_entry_priv_usb_bcn *priv_bcn;
+ struct urb *urb;
+ unsigned int guardian =
+ test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
unsigned int i;
- if (!ring->entry)
+ if (!queue->entries)
return;
- for (i = 0; i < ring->stats.limit; i++) {
- usb_kill_urb(ring->entry[i].priv);
- usb_free_urb(ring->entry[i].priv);
- if (ring->entry[i].skb)
- kfree_skb(ring->entry[i].skb);
+ for (i = 0; i < queue->limit; i++) {
+ if (queue->qid == QID_RX) {
+ priv_rx = queue->entries[i].priv_data;
+ urb = priv_rx->urb;
+ } else if (queue->qid == QID_MGMT && guardian) {
+ priv_bcn = queue->entries[i].priv_data;
+
+ usb_kill_urb(priv_bcn->guardian_urb);
+ usb_free_urb(priv_bcn->guardian_urb);
+
+ urb = priv_bcn->urb;
+ } else {
+ priv_tx = queue->entries[i].priv_data;
+ urb = priv_tx->urb;
+ }
+
+ usb_kill_urb(urb);
+ usb_free_urb(urb);
+ if (queue->entries[i].skb)
+ kfree_skb(queue->entries[i].skb);
}
}
int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev)
{
- struct data_ring *ring;
+ struct data_queue *queue;
struct sk_buff *skb;
unsigned int entry_size;
unsigned int i;
- int status;
+ int uninitialized_var(status);
/*
* Allocate DMA
*/
- ring_for_each(rt2x00dev, ring) {
- status = rt2x00usb_alloc_urb(rt2x00dev, ring);
+ queue_for_each(rt2x00dev, queue) {
+ status = rt2x00usb_alloc_urb(rt2x00dev, queue);
if (status)
goto exit;
}
/*
- * For the RX ring, skb's should be allocated.
+ * For the RX queue, skb's should be allocated.
*/
entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size;
- for (i = 0; i < rt2x00dev->rx->stats.limit; i++) {
- skb = dev_alloc_skb(NET_IP_ALIGN + entry_size);
+ for (i = 0; i < rt2x00dev->rx->limit; i++) {
+ skb = rt2x00usb_alloc_rxskb(rt2x00dev->rx);
if (!skb)
goto exit;
- skb_reserve(skb, NET_IP_ALIGN);
- skb_put(skb, entry_size);
-
- rt2x00dev->rx->entry[i].skb = skb;
+ rt2x00dev->rx->entries[i].skb = skb;
}
return 0;
void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
{
- struct data_ring *ring;
+ struct data_queue *queue;
- ring_for_each(rt2x00dev, ring)
- rt2x00usb_free_urb(rt2x00dev, ring);
+ queue_for_each(rt2x00dev, queue)
+ rt2x00usb_free_urb(rt2x00dev, queue);
}
EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize);
kfree(rt2x00dev->eeprom);
rt2x00dev->eeprom = NULL;
- kfree(rt2x00dev->csr_cache);
- rt2x00dev->csr_cache = NULL;
+ kfree(rt2x00dev->csr.cache);
+ rt2x00dev->csr.cache = NULL;
}
static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev)
{
- rt2x00dev->csr_cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
- if (!rt2x00dev->csr_cache)
+ rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL);
+ if (!rt2x00dev->csr.cache)
goto exit;
rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
#endif /* CONFIG_PM */
/*
- * rt2x00pci module information.
+ * rt2x00usb module information.
*/
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
-MODULE_DESCRIPTION("rt2x00 library");
+MODULE_DESCRIPTION("rt2x00 usb library");
MODULE_LICENSE("GPL");
projects / linux-2.6 / blobdiff