if (status)
return status;
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
+
rt2x00leds_led_radio(rt2x00dev, true);
rt2x00led_led_activity(rt2x00dev, true);
if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- /*
- * Stop all scheduled work.
- */
- if (work_pending(&rt2x00dev->intf_work))
- cancel_work_sync(&rt2x00dev->intf_work);
- if (work_pending(&rt2x00dev->filter_work))
- cancel_work_sync(&rt2x00dev->filter_work);
-
/*
* Stop the TX queues.
*/
* Disable radio.
*/
rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
+ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
rt2x00led_led_activity(rt2x00dev, false);
rt2x00leds_led_radio(rt2x00dev, false);
}
* Increase tuner counter, and reschedule the next link tuner run.
*/
rt2x00dev->link.count++;
- queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
- LINK_TUNE_INTERVAL);
+ queue_delayed_work(rt2x00dev->hw->workqueue,
+ &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
}
static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
spin_unlock(&intf->lock);
+ /*
+ * It is possible the radio was disabled while the work had been
+ * scheduled. If that happens we should return here immediately,
+ * note that in the spinlock protected area above the delayed_flags
+ * have been cleared correctly.
+ */
+ if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+ return;
+
if (delayed_flags & DELAYED_UPDATE_BEACON) {
skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
if (skb &&
}
if (delayed_flags & DELAYED_CONFIG_ERP)
- rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf);
+ rt2x00lib_config_erp(rt2x00dev, intf, &conf);
if (delayed_flags & DELAYED_LED_ASSOC)
rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
struct ieee80211_vif *vif)
{
+ struct rt2x00_dev *rt2x00dev = data;
struct rt2x00_intf *intf = vif_to_intf(vif);
if (vif->type != IEEE80211_IF_TYPE_AP &&
vif->type != IEEE80211_IF_TYPE_IBSS)
return;
+ /*
+ * Clean up the beacon skb.
+ */
+ rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb);
+ intf->beacon->skb = NULL;
+
spin_lock(&intf->lock);
intf->delayed_flags |= DELAYED_UPDATE_BEACON;
spin_unlock(&intf->lock);
rt2x00lib_beacondone_iter,
rt2x00dev);
- queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+ schedule_work(&rt2x00dev->intf_work);
}
EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
+ enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
/*
* Send frame to debugfs immediately, after this call is completed
ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
else
dev_kfree_skb_irq(entry->skb);
+
+ /*
+ * Make this entry available for reuse.
+ */
entry->skb = NULL;
+ entry->flags = 0;
+
+ rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry);
+
+ __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+ rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+
+ /*
+ * If the data queue was below the threshold before the txdone
+ * handler we must make sure the packet queue in the mac80211 stack
+ * is reenabled when the txdone handler has finished.
+ */
+ if (!rt2x00queue_threshold(entry->queue))
+ ieee80211_wake_queue(rt2x00dev->hw, qid);
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
-void rt2x00lib_rxdone(struct queue_entry *entry,
- struct rxdone_entry_desc *rxdesc)
+void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
+ struct queue_entry *entry)
{
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct rxdone_entry_desc rxdesc;
+ struct sk_buff *skb;
struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
struct ieee80211_supported_band *sband;
struct ieee80211_hdr *hdr;
const struct rt2x00_rate *rate;
+ unsigned int header_size;
+ unsigned int align;
unsigned int i;
int idx = -1;
- u16 fc;
+
+ /*
+ * Allocate a new sk_buffer. If no new buffer available, drop the
+ * received frame and reuse the existing buffer.
+ */
+ skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
+ if (!skb)
+ return;
+
+ /*
+ * Unmap the skb.
+ */
+ rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
+
+ /*
+ * Extract the RXD details.
+ */
+ memset(&rxdesc, 0, sizeof(rxdesc));
+ rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
+
+ /*
+ * The data behind the ieee80211 header must be
+ * aligned on a 4 byte boundary.
+ */
+ header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
+ align = ((unsigned long)(entry->skb->data + header_size)) & 3;
+
+ if (align) {
+ skb_push(entry->skb, align);
+ /* Move entire frame in 1 command */
+ memmove(entry->skb->data, entry->skb->data + align,
+ rxdesc.size);
+ }
+
+ /* Update data pointers, trim buffer to correct size */
+ skb_trim(entry->skb, rxdesc.size);
/*
* Update RX statistics.
for (i = 0; i < sband->n_bitrates; i++) {
rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
- if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
- (rate->plcp == rxdesc->signal)) ||
- (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
- (rate->bitrate == rxdesc->signal))) {
+ if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+ (rate->plcp == rxdesc.signal)) ||
+ (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+ (rate->bitrate == rxdesc.signal))) {
idx = i;
break;
}
if (idx < 0) {
WARNING(rt2x00dev, "Frame received with unrecognized signal,"
- "signal=0x%.2x, plcp=%d.\n", rxdesc->signal,
- !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP));
+ "signal=0x%.2x, plcp=%d.\n", rxdesc.signal,
+ !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP));
idx = 0;
}
* Only update link status if this is a beacon frame carrying our bssid.
*/
hdr = (struct ieee80211_hdr *)entry->skb->data;
- fc = le16_to_cpu(hdr->frame_control);
- if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS))
- rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi);
+ if (ieee80211_is_beacon(hdr->frame_control) &&
+ (rxdesc.dev_flags & RXDONE_MY_BSS))
+ rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
rt2x00dev->link.qual.rx_success++;
rx_status->rate_idx = idx;
rx_status->qual =
- rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
- rx_status->signal = rxdesc->rssi;
- rx_status->flag = rxdesc->flags;
+ rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi);
+ rx_status->signal = rxdesc.rssi;
+ rx_status->flag = rxdesc.flags;
rx_status->antenna = rt2x00dev->link.ant.active.rx;
/*
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
- entry->skb = NULL;
+
+ /*
+ * Replace the skb with the freshly allocated one.
+ */
+ entry->skb = skb;
+ entry->flags = 0;
+
+ rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry);
+
+ rt2x00queue_index_inc(entry->queue, Q_INDEX);
}
EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
* Suspend/disable extra components.
*/
rt2x00leds_suspend(rt2x00dev);
- rt2x00rfkill_suspend(rt2x00dev);
rt2x00debug_deregister(rt2x00dev);
exit:
* Restore/enable extra components.
*/
rt2x00debug_register(rt2x00dev);
- rt2x00rfkill_resume(rt2x00dev);
rt2x00leds_resume(rt2x00dev);
/*
projects / linux-2.6 / blobdiff