rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
rt2x00pci_register_read(rt2x00dev, ARCSR2, ®);
- rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask);
+ rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00);
rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04);
rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
u32 word;
- rt2x00_desc_read(priv_tx->desc, 1, &word);
- rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
- rt2x00_desc_write(priv_tx->desc, 1, word);
-
- rt2x00_desc_read(priv_tx->desc, 2, &word);
- rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH,
- entry->queue->data_size);
- rt2x00_desc_write(priv_tx->desc, 2, word);
-
rt2x00_desc_read(priv_tx->desc, 0, &word);
rt2x00_set_field32(&word, TXD_W0_VALID, 0);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
*/
static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
- struct txentry_desc *txdesc,
- struct ieee80211_tx_control *control)
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+ struct queue_entry_priv_pci_tx *entry_priv = skbdesc->entry->priv_data;
__le32 *txd = skbdesc->desc;
u32 word;
/*
* Start writing the descriptor words.
*/
+ rt2x00_desc_read(entry_priv->desc, 1, &word);
+ rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, entry_priv->data_dma);
+ rt2x00_desc_write(entry_priv->desc, 1, word);
+
rt2x00_desc_read(txd, 2, &word);
+ rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, skbdesc->data_len);
rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skbdesc->data_len);
rt2x00_desc_write(txd, 2, word);
test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
- !!(control->flags &
- IEEE80211_TXCTL_LONG_RETRY_LIMIT));
++ test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
rt2x00_desc_write(txd, 0, word);
}
* TX data initialization
*/
static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- const unsigned int queue)
+ const enum data_queue_qid queue)
{
u32 reg;
- if (queue == RT2X00_BCN_QUEUE_BEACON) {
+ if (queue == QID_BEACON) {
rt2x00pci_register_read(rt2x00dev, CSR14, ®);
if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
rt2x00_set_field32(®, CSR14_TSF_COUNT, 1);
}
rt2x00pci_register_read(rt2x00dev, TXCSR0, ®);
- rt2x00_set_field32(®, TXCSR0_KICK_PRIO,
- (queue == IEEE80211_TX_QUEUE_DATA0));
- rt2x00_set_field32(®, TXCSR0_KICK_TX,
- (queue == IEEE80211_TX_QUEUE_DATA1));
- rt2x00_set_field32(®, TXCSR0_KICK_ATIM,
- (queue == RT2X00_BCN_QUEUE_ATIM));
+ rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE));
+ rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK));
+ rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM));
rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
}
rt2x00_desc_read(priv_rx->desc, 2, &word2);
rt2x00_desc_read(priv_rx->desc, 3, &word3);
- rxdesc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
entry->queue->rt2x00dev->rssi_offset;
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- rxdesc->dev_flags = RXDONE_SIGNAL_PLCP;
+ rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
}
* Interrupt functions.
*/
static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
- const enum ieee80211_tx_queue queue_idx)
+ const enum data_queue_qid queue_idx)
{
struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
struct queue_entry_priv_pci_tx *priv_tx;
/*
* Obtain the status about this packet.
*/
- txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT);
+ txdesc.flags = 0;
+ switch (rt2x00_get_field32(word, TXD_W0_RESULT)) {
+ case 0: /* Success */
+ case 1: /* Success with retry */
+ __set_bit(TXDONE_SUCCESS, &txdesc.flags);
+ break;
+ case 2: /* Failure, excessive retries */
+ __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
+ /* Don't break, this is a failed frame! */
+ default: /* Failure */
+ __set_bit(TXDONE_FAILURE, &txdesc.flags);
+ }
txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
* 3 - Atim ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
- rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
+ rt2400pci_txdone(rt2x00dev, QID_ATIM);
/*
* 4 - Priority ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
- rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
+ rt2400pci_txdone(rt2x00dev, QID_AC_BE);
/*
* 5 - Tx ring transmit done interrupt.
*/
if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
- rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
+ rt2400pci_txdone(rt2x00dev, QID_AC_BK);
return IRQ_HANDLED;
}
if (value == LED_MODE_TXRX_ACTIVITY) {
rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
- rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY;
+ rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY;
rt2x00dev->led_qual.led_dev.brightness_set =
rt2400pci_brightness_set;
rt2x00dev->led_qual.led_dev.blink_set =
/*
* Initialize all hw fields.
*/
- rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM;
rt2x00dev->hw->extra_tx_headroom = 0;
- rt2x00dev->hw->max_signal = MAX_SIGNAL;
- rt2x00dev->hw->max_rssi = MAX_RX_SSI;
- rt2x00dev->hw->queues = 2;
SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
return 0;
}
-static int rt2400pci_conf_tx(struct ieee80211_hw *hw,
- int queue,
+static int rt2400pci_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
* per queue. So by default we only configure the TX queue,
* and ignore all other configurations.
*/
- if (queue != IEEE80211_TX_QUEUE_DATA0)
+ if (queue != 0)
return -EINVAL;
if (rt2x00mac_conf_tx(hw, queue, params))
struct rt2x00_intf *intf = vif_to_intf(control->vif);
struct queue_entry_priv_pci_tx *priv_tx;
struct skb_frame_desc *skbdesc;
+ struct txentry_desc txdesc;
u32 reg;
if (unlikely(!intf->beacon))
return -ENOBUFS;
priv_tx = intf->beacon->priv_data;
+ /*
+ * Copy all TX descriptor information into txdesc,
+ * after that we are free to use the skb->cb array
+ * for our information.
+ */
+ intf->beacon->skb = skb;
+ rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc, control);
+
/*
* Fill in skb descriptor
*/
rt2x00_set_field32(®, CSR14_BEACON_GEN, 0);
rt2x00pci_register_write(rt2x00dev, CSR14, reg);
- /*
- * mac80211 doesn't provide the control->queue variable
- * for beacons. Set our own queue identification so
- * it can be used during descriptor initialization.
- */
- control->queue = RT2X00_BCN_QUEUE_BEACON;
- rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
-
/*
* Enable beacon generation.
* Write entire beacon with descriptor to register,
* and kick the beacon generator.
*/
memcpy(priv_tx->data, skb->data, skb->len);
- rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
+ rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
+ rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON);
return 0;
}
.max_ap_intf = 1,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
.rx = &rt2400pci_queue_rx,
.tx = &rt2400pci_queue_tx,
.bcn = &rt2400pci_queue_bcn,
projects / linux-2.6 / blobdiff