/*
- *
* Copyright (C) 2002 Intersil Americas Inc.
* Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
*
#include "islpci_mgt.h" /* for pc_debug */
#include "isl_oid.h"
-#define DRV_NAME "prism54"
-#define DRV_VERSION "1.2"
-
MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>");
MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter");
MODULE_LICENSE("GPL");
module_param(init_pcitm, int, 0);
/* In this order: vendor, device, subvendor, subdevice, class, class_mask,
- * driver_data
- * If you have an update for this please contact prism54-devel@prism54.org
+ * driver_data
+ * If you have an update for this please contact prism54-devel@prism54.org
* The latest list can be found at http://prism54.org/supported_cards.php */
static const struct pci_device_id prism54_id_tbl[] = {
/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
- /* .enable_wake ; we don't support this yet */
};
/******************************************************************************
/* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT)
* 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT)
- * The RETRY_TIMEOUT is used to set the number of retries that the core, as a
- * Master, will perform before abandoning a cycle. The default value for
- * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
- * devices. A write of zero to the RETRY_TIMEOUT register disables this
- * function to allow use with any non-compliant legacy devices that may
- * execute more retries.
+ * The RETRY_TIMEOUT is used to set the number of retries that the core, as a
+ * Master, will perform before abandoning a cycle. The default value for
+ * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
+ * devices. A write of zero to the RETRY_TIMEOUT register disables this
+ * function to allow use with any non-compliant legacy devices that may
+ * execute more retries.
*
- * Writing zero to both these two registers will disable both timeouts and
- * *can* solve problems caused by devices that are slow to respond.
+ * Writing zero to both these two registers will disable both timeouts and
+ * *can* solve problems caused by devices that are slow to respond.
* Make this configurable - MSW
*/
if ( init_pcitm >= 0 ) {
pci_set_master(pdev);
/* enable MWI */
- pci_set_mwi(pdev);
+ pci_try_set_mwi(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {
/* error configuring the driver as a network device */
printk(KERN_ERR "%s: could not configure network device\n",
DRV_NAME);
- goto do_pci_release_regions;
+ goto do_pci_clear_mwi;
}
priv = netdev_priv(ndev);
pci_set_drvdata(pdev, NULL);
free_netdev(ndev);
priv = NULL;
+ do_pci_clear_mwi:
+ pci_clear_mwi(pdev);
do_pci_release_regions:
pci_release_regions(pdev);
do_pci_disable_device:
isl38xx_disable_interrupts(priv->device_base);
islpci_set_state(priv, PRV_STATE_OFF);
/* This bellow causes a lockup at rmmod time. It might be
- * because some interrupts still linger after rmmod time,
+ * because some interrupts still linger after rmmod time,
* see bug #17 */
/* pci_set_power_state(pdev, 3);*/ /* try to power-off */
}
free_netdev(ndev);
priv = NULL;
+ pci_clear_mwi(pdev);
+
pci_release_regions(pdev);
pci_disable_device(pdev);
{
struct net_device *ndev = pci_get_drvdata(pdev);
islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
- BUG_ON(!priv);
+ int err;
- pci_enable_device(pdev);
+ BUG_ON(!priv);
printk(KERN_NOTICE "%s: got resume request\n", ndev->name);
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
+ ndev->name);
+ return err;
+ }
+
pci_restore_state(pdev);
/* alright let's go into the PREBOOT state */