*/
void b43_dummy_transmission(struct b43_wldev *dev)
{
+ struct b43_wl *wl = dev->wl;
struct b43_phy *phy = &dev->phy;
unsigned int i, max_loop;
u16 value;
return;
}
+ spin_lock_irq(&wl->irq_lock);
+ write_lock(&wl->tx_lock);
+
for (i = 0; i < 5; i++)
b43_ram_write(dev, i * 4, buffer[i]);
}
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43_radio_write16(dev, 0x0051, 0x0037);
+
+ write_unlock(&wl->tx_lock);
+ spin_unlock_irq(&wl->irq_lock);
}
static void key_write(struct b43_wldev *dev,
b43_jssi_write(dev, 0x7F7F7F7F);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE);
- B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel);
}
static void b43_calculate_link_quality(struct b43_wldev *dev)
if (dev->noisecalc.calculation_running)
return;
- dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = 1;
dev->noisecalc.nr_samples = 0;
/* Bottom half of Link Quality calculation. */
+ /* Possible race condition: It might be possible that the user
+ * changed to a different channel in the meantime since we
+ * started the calculation. We ignore that fact, since it's
+ * not really that much of a problem. The background noise is
+ * an estimation only anyway. Slightly wrong results will get damped
+ * by the averaging of the 8 sample rounds. Additionally the
+ * value is shortlived. So it will be replaced by the next noise
+ * calculation round soon. */
+
B43_WARN_ON(!dev->noisecalc.calculation_running);
- if (dev->noisecalc.channel_at_start != phy->channel)
- goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
average -= 48;
dev->stats.link_noise = average;
- drop_calculation:
dev->noisecalc.calculation_running = 0;
return;
}
- generate_new:
+generate_new:
b43_generate_noise_sample(dev);
}
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
- int err = -ENODEV;
+ unsigned long flags;
+ int err;
if (unlikely(skb->len < 2 + 2 + 6)) {
/* Too short, this can't be a valid frame. */
- return -EINVAL;
+ goto drop_packet;
}
B43_WARN_ON(skb_shinfo(skb)->nr_frags);
-
if (unlikely(!dev))
- goto out;
- if (unlikely(b43_status(dev) < B43_STAT_STARTED))
- goto out;
- /* TX is done without a global lock. */
- if (b43_using_pio_transfers(dev))
- err = b43_pio_tx(dev, skb, ctl);
- else
- err = b43_dma_tx(dev, skb, ctl);
-out:
+ goto drop_packet;
+
+ /* Transmissions on seperate queues can run concurrently. */
+ read_lock_irqsave(&wl->tx_lock, flags);
+
+ err = -ENODEV;
+ if (likely(b43_status(dev) >= B43_STAT_STARTED)) {
+ if (b43_using_pio_transfers(dev))
+ err = b43_pio_tx(dev, skb, ctl);
+ else
+ err = b43_dma_tx(dev, skb, ctl);
+ }
+
+ read_unlock_irqrestore(&wl->tx_lock, flags);
+
if (unlikely(err))
- return NETDEV_TX_BUSY;
+ goto drop_packet;
+ return NETDEV_TX_OK;
+
+drop_packet:
+ /* We can not transmit this packet. Drop it. */
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43_synchronize_irq(dev);
+ write_lock_irqsave(&wl->tx_lock, flags);
b43_set_status(dev, B43_STAT_INITIALIZED);
+ write_unlock_irqrestore(&wl->tx_lock, flags);
b43_pio_stop(dev);
mutex_unlock(&wl->mutex);
cancel_delayed_work_sync(&dev->periodic_work);
mutex_lock(&wl->mutex);
- ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy.
-
b43_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43dbg(wl, "Wireless interface stopped\n");
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
err = -EOPNOTSUPP;
goto err_powerdown;
}
+ if (1 /* disable A-PHY */) {
+ /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
+ if (dev->phy.type != B43_PHYTYPE_N) {
+ have_2ghz_phy = 1;
+ have_5ghz_phy = 0;
+ }
+ }
+
dev->phy.gmode = have_2ghz_phy;
tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
b43_wireless_core_reset(dev, tmp);
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
memset(wl, 0, sizeof(*wl));
wl->hw = hw;
spin_lock_init(&wl->irq_lock);
+ rwlock_init(&wl->tx_lock);
spin_lock_init(&wl->leds_lock);
spin_lock_init(&wl->shm_lock);
mutex_init(&wl->mutex);
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
projects / linux-2.6 / blobdiff