#include <asm/irq.h>
/* These identify the driver base version and may not be removed. */
-static char version[] __devinitdata =
+static char version[] =
KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <becker@scyld.com>\n"
KERN_INFO " http://www.scyld.com/network/drivers.html\n";
/*
PCI probe table.
*/
-enum pci_id_flags_bits {
- /* Set PCI command register bits before calling probe1(). */
- PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
- /* Read and map the single following PCI BAR. */
- PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
- PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
-};
enum chip_capability_flags {
- CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,};
-#ifdef USE_IO_OPS
-#define W840_FLAGS (PCI_USES_IO | PCI_ADDR0 | PCI_USES_MASTER)
-#else
-#define W840_FLAGS (PCI_USES_MEM | PCI_ADDR1 | PCI_USES_MASTER)
-#endif
+ CanHaveMII=1, HasBrokenTx=2, AlwaysFDX=4, FDXOnNoMII=8,
+};
-static struct pci_device_id w840_pci_tbl[] = {
+static const struct pci_device_id w840_pci_tbl[] = {
{ 0x1050, 0x0840, PCI_ANY_ID, 0x8153, 0, 0, 0 },
{ 0x1050, 0x0840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
{ 0x11f6, 0x2011, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
- { 0, }
+ { }
};
MODULE_DEVICE_TABLE(pci, w840_pci_tbl);
+enum {
+ netdev_res_size = 128, /* size of PCI BAR resource */
+};
+
struct pci_id_info {
const char *name;
- struct match_info {
- int pci, pci_mask, subsystem, subsystem_mask;
- int revision, revision_mask; /* Only 8 bits. */
- } id;
- enum pci_id_flags_bits pci_flags;
- int io_size; /* Needed for I/O region check or ioremap(). */
- int drv_flags; /* Driver use, intended as capability flags. */
+ int drv_flags; /* Driver use, intended as capability flags. */
};
-static struct pci_id_info pci_id_tbl[] = {
- {"Winbond W89c840", /* Sometime a Level-One switch card. */
- { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 },
- W840_FLAGS, 128, CanHaveMII | HasBrokenTx | FDXOnNoMII},
- {"Winbond W89c840", { 0x08401050, 0xffffffff, },
- W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
- {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,},
- W840_FLAGS, 128, CanHaveMII | HasBrokenTx},
- {NULL,}, /* 0 terminated list. */
+
+static const struct pci_id_info pci_id_tbl[] __devinitdata = {
+ { /* Sometime a Level-One switch card. */
+ "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII},
+ { "Winbond W89c840", CanHaveMII | HasBrokenTx},
+ { "Compex RL100-ATX", CanHaveMII | HasBrokenTx},
+ { } /* terminate list. */
};
/* This driver was written to use PCI memory space, however some x86 systems
#ifdef USE_IO_OPS
bar = 0;
#endif
- ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size);
+ ioaddr = pci_iomap(pdev, bar, netdev_res_size);
if (!ioaddr)
goto err_out_free_res;
iowrite32(0x00000001, ioaddr + PCIBusCfg); /* Reset */
netif_device_detach(dev);
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
goto out_err;
* - get_stats:
* spin_lock_irq(np->lock), doesn't touch hw if not present
* - hard_start_xmit:
- * netif_stop_queue + spin_unlock_wait(&dev->xmit_lock);
+ * synchronize_irq + netif_tx_disable;
* - tx_timeout:
- * netif_device_detach + spin_unlock_wait(&dev->xmit_lock);
+ * netif_device_detach + netif_tx_disable;
* - set_multicast_list
- * netif_device_detach + spin_unlock_wait(&dev->xmit_lock);
+ * netif_device_detach + netif_tx_disable;
* - interrupt handler
* doesn't touch hw if not present, synchronize_irq waits for
* running instances of the interrupt handler.
netif_device_detach(dev);
update_csr6(dev, 0);
iowrite32(0, ioaddr + IntrEnable);
- netif_stop_queue(dev);
spin_unlock_irq(&np->lock);
- spin_unlock_wait(&dev->xmit_lock);
synchronize_irq(dev->irq);
-
+ netif_tx_disable(dev);
+
np->stats.rx_missed_errors += ioread32(ioaddr + RxMissed) & 0xffff;
/* no more hardware accesses behind this line. */
static int __init w840_init(void)
{
printk(version);
- return pci_module_init(&w840_driver);
+ return pci_register_driver(&w840_driver);
}
static void __exit w840_exit(void)