#define DRV_NAME "tulip"
#ifdef CONFIG_TULIP_NAPI
-#define DRV_VERSION "1.1.14-NAPI" /* Keep at least for test */
+#define DRV_VERSION "1.1.15-NAPI" /* Keep at least for test */
#else
-#define DRV_VERSION "1.1.14"
+#define DRV_VERSION "1.1.15"
#endif
-#define DRV_RELDATE "May 11, 2002"
+#define DRV_RELDATE "Feb 27, 2007"
#include <linux/module.h>
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
- if (csr0 & MWI) pci_set_mwi(pdev);
+ if (csr0 & MWI) pci_try_set_mwi(pdev);
else pci_clear_mwi(pdev);
/* read result from hardware (in case bit refused to enable) */
};
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
- u8 chip_rev;
int i, irq;
unsigned short sum;
unsigned char *ee_data;
if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
{
- u32 dev_rev;
/* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
- if(dev_rev < 0x02000030)
+ if (pdev->revision < 0x30)
{
printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
if (!ioaddr)
goto err_out_free_res;
- pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
-
/*
* initialize private data structure 'tp'
* it is zeroed and aligned in alloc_etherdev
tp->flags = tulip_tbl[chip_idx].flags;
tp->pdev = pdev;
tp->base_addr = ioaddr;
- tp->revision = chip_rev;
+ tp->revision = pdev->revision;
tp->csr0 = csr0;
spin_lock_init(&tp->lock);
spin_lock_init(&tp->mii_lock);
tulip_mwi_config (pdev, dev);
#else
/* MWI is broken for DC21143 rev 65... */
- if (chip_idx == DC21143 && chip_rev == 65)
+ if (chip_idx == DC21143 && pdev->revision == 65)
tp->csr0 &= ~MWI;
#endif
sa_offset = 2; /* Grrr, damn Matrox boards. */
multiport_cnt = 4;
}
-#ifdef CONFIG_DDB5477
- if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 4)) {
- /* DDB5477 MAC address in first EEPROM locations. */
- sa_offset = 0;
- /* No media table either */
- tp->flags &= ~HAS_MEDIA_TABLE;
- }
-#endif
#ifdef CONFIG_MIPS_COBALT
if ((pdev->bus->number == 0) &&
((PCI_SLOT(pdev->devfn) == 7) ||
#else
"Port"
#endif
- " %#llx,", dev->name, chip_name, chip_rev,
+ " %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);