Version LK1.10 (Philippe De Muyter phdm@macqel.be):
- Make 'unblock interface after Tx underrun' work
+ Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com):
+ - Add support for IC Plus Corporation IP100A chipset
*/
#define DRV_NAME "sundance"
-#define DRV_VERSION "1.01+LK1.10"
-#define DRV_RELDATE "28-Oct-2005"
+#define DRV_VERSION "1.01+LK1.11"
+#define DRV_RELDATE "14-Jun-2006"
/* The user-configurable values.
static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
Typical is a 64 element hash table based on the Ethernet CRC. */
-static int multicast_filter_limit = 32;
+static const int multicast_filter_limit = 32;
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
Setting to > 1518 effectively disables this feature.
{0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3},
{0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
{0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
+ {0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6},
{0,}
};
MODULE_DEVICE_TABLE(pci, sundance_pci_tbl);
struct pci_id_info {
const char *name;
};
-static struct pci_id_info pci_id_tbl[] = {
+static const struct pci_id_info pci_id_tbl[] = {
{"D-Link DFE-550TX FAST Ethernet Adapter"},
{"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"},
{"D-Link DFE-580TX 4 port Server Adapter"},
{"D-Link DFE-530TXS FAST Ethernet Adapter"},
{"D-Link DL10050-based FAST Ethernet Adapter"},
{"Sundance Technology Alta"},
+ {"IC Plus Corporation IP100A FAST Ethernet Adapter"},
{NULL,}, /* 0 terminated list. */
};
np->phys[0] = 1; /* Default setting */
np->mii_preamble_required++;
+ /*
+ * It seems some phys doesn't deal well with address 0 being accessed
+ * first, so leave address zero to the end of the loop (32 & 31).
+ */
for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
- int mii_status = mdio_read(dev, phy, MII_BMSR);
int phyx = phy & 0x1f;
+ int mii_status = mdio_read(dev, phyx, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phyx;
np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
/* Do we need to reset the chip??? */
- i = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev);
+ i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
if (i)
return i;