MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:smc911x");
/*
* The internal workings of the driver. If you are changing anything
do {
udelay(10);
reg = SMC_GET_PMT_CTRL() & PMT_CTRL_READY_;
- } while ( timeout-- && !reg);
+ } while (--timeout && !reg);
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
return;
resets++;
break;
}
- } while ( timeout-- && (reg & HW_CFG_SRST_));
+ } while (--timeout && (reg & HW_CFG_SRST_));
}
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
do {
udelay(10);
reg = SMC_GET_RX_DP_CTRL() & RX_DP_CTRL_FFWD_BUSY_;
- } while ( timeout-- && reg);
+ } while (--timeout && reg);
if (timeout == 0) {
PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
}
*/
static inline void smc911x_rcv(struct net_device *dev)
{
- struct smc911x_local *lp = netdev_priv(dev);
unsigned long ioaddr = dev->base_addr;
unsigned int pkt_len, status;
struct sk_buff *skb;
skb_put(skb,pkt_len-4);
#ifdef SMC_USE_DMA
{
+ struct smc911x_local *lp = netdev_priv(dev);
unsigned int fifo;
/* Lower the FIFO threshold if possible */
fifo = SMC_GET_FIFO_INT();
}
#endif
- /* Handle PHY interupt condition */
+ /* Handle PHY interrupt condition */
if (status & INT_STS_PHY_INT_) {
DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name);
smc911x_phy_interrupt(dev);
PRINT_PKT(skb->data, skb->len);
dev->last_rx = jiffies;
skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
+ netif_rx(skb);
spin_lock_irqsave(&lp->lock, flags);
pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16;
unsigned int multicast_table[2];
unsigned int mcr, update_multicast = 0;
unsigned long flags;
- /* table for flipping the order of 5 bits */
- static const unsigned char invert5[] =
- {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C,
- 0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E,
- 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D,
- 0x03, 0x13, 0x0B, 0x1B, 0x07, 0x17, 0x0F, 0x1F};
-
DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
cur_addr = dev->mc_list;
for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
- int position;
+ u32 position;
/* do we have a pointer here? */
if (!cur_addr)
if (!(*cur_addr->dmi_addr & 1))
continue;
- /* only use the low order bits */
- position = crc32_le(~0, cur_addr->dmi_addr, 6) & 0x3f;
+ /* upper 6 bits are used as hash index */
+ position = ether_crc(ETH_ALEN, cur_addr->dmi_addr)>>26;
- /* do some messy swapping to put the bit in the right spot */
- multicast_table[invert5[position&0x1F]&0x1] |=
- (1<<invert5[(position>>1)&0x1F]);
+ multicast_table[position>>5] |= 1 << (position&0x1f);
}
/* be sure I get rid of flags I might have set */
/* Grab the IRQ */
retval = request_irq(dev->irq, &smc911x_interrupt,
- IRQF_SHARED | IRQF_TRIGGER_FALLING, dev->name, dev);
+ IRQF_SHARED | SMC_IRQ_SENSE, dev->name, dev);
if (retval)
goto err_out;
.resume = smc911x_drv_resume,
.driver = {
.name = CARDNAME,
+ .owner = THIS_MODULE,
},
};