#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.10"
+#define DRV_VERSION "1.11.1"
#define PFX DRV_NAME " "
/*
MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
static const struct pci_device_id sky2_id_table[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
+ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) },
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) },
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4343) }, /* 88E8062 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4344) }, /* 88E8021 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4345) }, /* 88E8022 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4346) }, /* 88E8061 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4347) }, /* 88E8062 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4350) }, /* 88E8035 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
{ 0 }
};
return v;
}
-static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
-{
- u16 power_control;
- int vaux;
-
- pr_debug("sky2_set_power_state %d\n", state);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
- vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
- (power_control & PCI_PM_CAP_PME_D3cold);
-
- power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-
- power_control |= PCI_PM_CTRL_PME_STATUS;
- power_control &= ~(PCI_PM_CTRL_STATE_MASK);
-
- switch (state) {
- case PCI_D0:
- /* switch power to VCC (WA for VAUX problem) */
- sky2_write8(hw, B0_POWER_CTRL,
- PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
-
- /* disable Core Clock Division, */
- sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- /* enable bits are inverted */
- sky2_write8(hw, B2_Y2_CLK_GATE,
- Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
- Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
- Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
- else
- sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+static void sky2_power_on(struct sky2_hw *hw)
+{
+ /* switch power to VCC (WA for VAUX problem) */
+ sky2_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- u32 reg1;
+ /* disable Core Clock Division, */
+ sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
- sky2_pci_write32(hw, PCI_DEV_REG3, 0);
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
- reg1 &= P_ASPM_CONTROL_MSK;
- sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
- sky2_pci_write32(hw, PCI_DEV_REG5, 0);
- }
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+ else
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- break;
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ u32 reg1;
- case PCI_D3hot:
- case PCI_D3cold:
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- else
- /* enable bits are inverted */
- sky2_write8(hw, B2_Y2_CLK_GATE,
- Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
- Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
- Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-
- /* switch power to VAUX */
- if (vaux && state != PCI_D3cold)
- sky2_write8(hw, B0_POWER_CTRL,
- (PC_VAUX_ENA | PC_VCC_ENA |
- PC_VAUX_ON | PC_VCC_OFF));
- break;
- default:
- printk(KERN_ERR PFX "Unknown power state %d\n", state);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+ reg1 &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG5, 0);
}
+}
- sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+static void sky2_power_aux(struct sky2_hw *hw)
+{
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+ else
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+ /* switch power to VAUX */
+ if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
+ sky2_write8(hw, B0_POWER_CTRL,
+ (PC_VAUX_ENA | PC_VCC_ENA |
+ PC_VAUX_ON | PC_VCC_OFF));
}
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
/* turn off the Rx LED (LED_RX) */
- ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
+ ledover &= ~PHY_M_LED_MO_RX;
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ ledover |= PHY_M_LED_MO_100;
}
if (ledover)
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
onoff = !onoff;
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
-
if (onoff)
/* Turn off phy power saving */
reg1 &= ~phy_power[port];
sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
sky2_pci_read32(hw, PCI_DEV_REG1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
udelay(100);
}
/* Flush Rx MAC FIFO on any flow control or error */
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
- /* Set threshold to 0xa (64 bytes)
- * ASF disabled so no need to do WA dev #4.30
- */
- sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+ /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */
+ sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
/* Configure Tx MAC FIFO */
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 512/8);
+ sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
if (hw->dev[port]->mtu > ETH_DATA_LEN) {
/* set Tx GMAC FIFO Almost Empty Threshold */
}
-/* Assign Ram Buffer allocation in units of 64bit (8 bytes) */
-static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 end)
+/* Assign Ram Buffer allocation to queue */
+static void sky2_ramset(struct sky2_hw *hw, u16 q, u32 start, u32 space)
{
- pr_debug(PFX "q %d %#x %#x\n", q, start, end);
+ u32 end;
+
+ /* convert from K bytes to qwords used for hw register */
+ start *= 1024/8;
+ space *= 1024/8;
+ end = start + space - 1;
sky2_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
sky2_write32(hw, RB_ADDR(q, RB_START), start);
sky2_write32(hw, RB_ADDR(q, RB_RP), start);
if (q == Q_R1 || q == Q_R2) {
- u32 space = end - start + 1;
u32 tp = space - space/4;
/* On receive queue's set the thresholds
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
- /* MAC Rx RAM Read is controlled by hardware */
+ /* On PCI express lowering the watermark gives better performance */
+ if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+ sky2_write32(hw, Q_ADDR(rxq, Q_WM), BMU_WM_PEX);
+
+ /* These chips have no ram buffer?
+ * MAC Rx RAM Read is controlled by hardware */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+ (hw->chip_rev == CHIP_REV_YU_EC_U_A1
+ || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
- }
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
- u32 ramsize, rxspace, imask;
+ u32 ramsize, imask;
int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
sky2_mac_init(hw, port);
- /* Determine available ram buffer space in qwords. */
- ramsize = sky2_read8(hw, B2_E_0) * 4096/8;
+ /* Register is number of 4K blocks on internal RAM buffer. */
+ ramsize = sky2_read8(hw, B2_E_0) * 4;
+ printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize);
- if (ramsize > 6*1024/8)
- rxspace = ramsize - (ramsize + 2) / 3;
- else
- rxspace = ramsize / 2;
+ if (ramsize > 0) {
+ u32 rxspace;
- sky2_ramset(hw, rxqaddr[port], 0, rxspace-1);
- sky2_ramset(hw, txqaddr[port], rxspace, ramsize-1);
+ if (ramsize < 16)
+ rxspace = ramsize / 2;
+ else
+ rxspace = 8 + (2*(ramsize - 16))/3;
- /* Make sure SyncQ is disabled */
- sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
- RB_RST_SET);
+ sky2_ramset(hw, rxqaddr[port], 0, rxspace);
+ sky2_ramset(hw, txqaddr[port], rxspace, ramsize - rxspace);
+
+ /* Make sure SyncQ is disabled */
+ sky2_write8(hw, RB_ADDR(port == 0 ? Q_XS1 : Q_XS2, RB_CTRL),
+ RB_RST_SET);
+ }
sky2_qset(hw, txqaddr[port]);
u32 tcpsum;
tcpsum = offset << 16; /* sum start */
- tcpsum |= offset + skb->csum; /* sum write */
+ tcpsum |= offset + skb->csum_offset; /* sum write */
ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
if (skb->nh.iph->protocol == IPPROTO_UDP)
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
- dev_kfree_skb(re->skb);
+ sky2->net_stats.tx_packets++;
+ sky2->net_stats.tx_bytes += re->skb->len;
+
+ dev_kfree_skb_any(re->skb);
}
le->opcode = 0; /* paranoia */
imask &= ~portirq_msk[port];
sky2_write32(hw, B0_IMSK, imask);
+ /*
+ * Both ports share the NAPI poll on port 0, so if necessary undo the
+ * the disable that is done in dev_close.
+ */
+ if (sky2->port == 0 && hw->ports > 1)
+ netif_poll_enable(dev);
+
sky2_gmac_reset(hw, port);
/* Stop transmitter */
/* WA for dev. #4.209 */
if (hw->chip_id == CHIP_ID_YUKON_EC_U
- && hw->chip_rev == CHIP_REV_YU_EC_U_A1)
+ && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
sky2->speed != SPEED_1000 ?
TX_STFW_ENA : TX_STFW_DIS);
case OP_RXSTAT:
skb = sky2_receive(dev, length, status);
if (!skb)
- break;
+ goto force_update;
skb->protocol = eth_type_trans(skb, dev);
+ sky2->net_stats.rx_packets++;
+ sky2->net_stats.rx_bytes += skb->len;
dev->last_rx = jiffies;
#ifdef SKY2_VLAN_TAG_USED
/* Update receiver after 16 frames */
if (++buf_write[le->link] == RX_BUF_WRITE) {
- sky2_put_idx(hw, rxqaddr[le->link],
- sky2->rx_put);
+force_update:
+ sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put);
buf_write[le->link] = 0;
}
++hw->ports;
}
- sky2_set_power_state(hw, PCI_D0);
+ sky2_power_on(hw);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
}
}
-/* Use hardware MIB variables for critical path statistics and
- * transmit feedback not reported at interrupt.
- * Other errors are accounted for in interrupt handler.
- */
static struct net_device_stats *sky2_get_stats(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
- u64 data[13];
-
- sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
-
- sky2->net_stats.tx_bytes = data[0];
- sky2->net_stats.rx_bytes = data[1];
- sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
- sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
- sky2->net_stats.multicast = data[3] + data[5];
- sky2->net_stats.collisions = data[10];
- sky2->net_stats.tx_aborted_errors = data[12];
-
return &sky2->net_stats;
}
default:
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- on ? PHY_M_LED_MO_DUP(MO_LED_ON) |
- PHY_M_LED_MO_10(MO_LED_ON) |
- PHY_M_LED_MO_100(MO_LED_ON) |
- PHY_M_LED_MO_1000(MO_LED_ON) |
- PHY_M_LED_MO_RX(MO_LED_ON)
- : PHY_M_LED_MO_DUP(MO_LED_OFF) |
- PHY_M_LED_MO_10(MO_LED_OFF) |
- PHY_M_LED_MO_100(MO_LED_OFF) |
- PHY_M_LED_MO_1000(MO_LED_OFF) |
- PHY_M_LED_MO_RX(MO_LED_OFF));
-
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ on ? PHY_M_LED_ALL : 0);
}
}
return IRQ_NONE;
if (status & Y2_IS_IRQ_SW) {
- hw->msi_detected = 1;
+ hw->msi = 1;
wake_up(&hw->msi_wait);
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
}
sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
- err = request_irq(pdev->irq, sky2_test_intr, IRQF_SHARED, DRV_NAME, hw);
+ err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
sky2_read8(hw, B0_CTST);
- wait_event_timeout(hw->msi_wait, hw->msi_detected, HZ/10);
+ wait_event_timeout(hw->msi_wait, hw->msi, HZ/10);
- if (!hw->msi_detected) {
+ if (!hw->msi) {
/* MSI test failed, go back to INTx mode */
printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
"switching to INTx mode.\n",
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- struct net_device *dev, *dev1 = NULL;
+ struct net_device *dev;
struct sky2_hw *hw;
- int err, pm_cap, using_dac = 0;
+ int err, using_dac = 0;
err = pci_enable_device(pdev);
if (err) {
pci_set_master(pdev);
- /* Find power-management capability. */
- pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
- "aborting.\n");
- err = -EIO;
- goto err_out_free_regions;
- }
-
if (sizeof(dma_addr_t) > sizeof(u32) &&
!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
using_dac = 1;
pci_name(pdev));
goto err_out_free_hw;
}
- hw->pm_cap = pm_cap;
#ifdef __BIG_ENDIAN
/* The sk98lin vendor driver uses hardware byte swapping but
hw->chip_id, hw->chip_rev);
dev = sky2_init_netdev(hw, 0, using_dac);
- if (!dev)
+ if (!dev) {
+ err = -ENOMEM;
goto err_out_free_pci;
+ }
if (!disable_msi && pci_enable_msi(pdev) == 0) {
err = sky2_test_msi(hw);
goto err_out_free_netdev;
}
- err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, dev->name, hw);
+ err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
+ dev->name, hw);
if (err) {
printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
pci_name(pdev), pdev->irq);
sky2_show_addr(dev);
- if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
- if (register_netdev(dev1) == 0)
+ if (hw->ports > 1) {
+ struct net_device *dev1;
+
+ dev1 = sky2_init_netdev(hw, 1, using_dac);
+ if (!dev1) {
+ printk(KERN_WARNING PFX
+ "allocation of second port failed\n");
+ }
+ else if (!(err = register_netdev(dev1)))
sky2_show_addr(dev1);
else {
- /* Failure to register second port need not be fatal */
printk(KERN_WARNING PFX
- "register of second port failed\n");
+ "register of second port failed (%d)\n", err);
hw->dev[1] = NULL;
free_netdev(dev1);
}
return 0;
err_out_unregister:
- pci_disable_msi(pdev);
+ if (hw->msi)
+ pci_disable_msi(pdev);
unregister_netdev(dev);
err_out_free_netdev:
free_netdev(dev);
unregister_netdev(dev1);
unregister_netdev(dev0);
- sky2_set_power_state(hw, PCI_D3hot);
+ sky2_power_aux(hw);
+
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- pci_disable_msi(pdev);
+ if (hw->msi)
+ pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i;
- pci_power_t pstate = pci_choose_state(pdev, state);
-
- if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
- return -EINVAL;
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
}
sky2_write32(hw, B0_IMSK, 0);
+ sky2_power_aux(hw);
pci_save_state(pdev);
- sky2_set_power_state(hw, pstate);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
return 0;
}
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, err;
- pci_restore_state(pdev);
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err)
+ goto out;
+
+ err = pci_restore_state(pdev);
+ if (err)
+ goto out;
+
pci_enable_wake(pdev, PCI_D0, 0);
- sky2_set_power_state(hw, PCI_D0);
err = sky2_reset(hw);
if (err)
netif_poll_enable(hw->dev[0]);
sky2_idle_start(hw);
+ return 0;
out:
+ printk(KERN_ERR PFX "%s: resume failed (%d)\n", pci_name(pdev), err);
+ pci_disable_device(pdev);
return err;
}
#endif
module_exit(sky2_cleanup_module);
MODULE_DESCRIPTION("Marvell Yukon 2 Gigabit Ethernet driver");
-MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
+MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);