#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.10"
+#define DRV_VERSION "1.11.1"
#define PFX DRV_NAME " "
/*
static const char *yukon2_name[] = {
"XL", /* 0xb3 */
"EC Ultra", /* 0xb4 */
- "UNKNOWN", /* 0xb5 */
+ "Extreme", /* 0xb5 */
"EC", /* 0xb6 */
"FE", /* 0xb7 */
};
else
sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
u32 reg1;
sky2_pci_write32(hw, PCI_DEV_REG3, 0);
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
- if (sky2->autoneg == AUTONEG_ENABLE &&
- !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ if (sky2->autoneg == AUTONEG_ENABLE
+ && !(hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
/* enable automatic crossover */
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
- if (sky2->autoneg == AUTONEG_ENABLE &&
- (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ if (sky2->autoneg == AUTONEG_ENABLE
+ && (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)) {
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
}
/* restore page register */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
break;
+
case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* select page 3 to access LED control register */
/* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
+ } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
spin_unlock_bh(&sky2->phy_lock);
}
+/* Put device in state to listen for Wake On Lan */
+static void sky2_wol_init(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ enum flow_control save_mode;
+ u16 ctrl;
+ u32 reg1;
+
+ /* Bring hardware out of reset */
+ sky2_write16(hw, B0_CTST, CS_RST_CLR);
+ sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100
+ * sky2_reset will re-enable on resume
+ */
+ save_mode = sky2->flow_mode;
+ ctrl = sky2->advertising;
+
+ sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+ sky2->flow_mode = FC_NONE;
+ sky2_phy_power(hw, port, 1);
+ sky2_phy_reinit(sky2);
+
+ sky2->flow_mode = save_mode;
+ sky2->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ sky2->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (sky2->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (sky2->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* Turn on legacy PCI-Express PME mode */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= PCI_Y2_PME_LEGACY;
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* block receiver */
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+}
+
static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
{
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
if (hw->dev[port]->mtu > ETH_DATA_LEN) {
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
+ sky2->net_stats.tx_packets++;
+ sky2->net_stats.tx_bytes += re->skb->len;
+
dev_kfree_skb_any(re->skb);
}
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ if (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
/* Pause bits are offset (9..8) */
- if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ if (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)
aux >>= 6;
sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN,
aux & PHY_M_PS_TX_P_EN);
if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
- && hw->chip_id != CHIP_ID_YUKON_EC_U)
+ && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
sky2->flow_status = FC_NONE;
if (aux & PHY_M_PS_RX_P_EN)
}
-/* Transmit timeout is only called if we are running, carries is up
+/* Transmit timeout is only called if we are running, carrier is up
* and tx queue is full (stopped).
+ * Called with netif_tx_lock held.
*/
static void sky2_tx_timeout(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
- unsigned txq = txqaddr[sky2->port];
- u16 report, done;
+ u32 imask;
if (netif_msg_timer(sky2))
printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
- report = sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX);
- done = sky2_read16(hw, Q_ADDR(txq, Q_DONE));
-
printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
- dev->name,
- sky2->tx_cons, sky2->tx_prod, report, done);
-
- if (report != done) {
- printk(KERN_INFO PFX "status burst pending (irq moderation?)\n");
+ dev->name, sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- } else if (report != sky2->tx_cons) {
- printk(KERN_INFO PFX "status report lost?\n");
+ imask = sky2_read32(hw, B0_IMSK); /* block IRQ in hw */
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
- netif_tx_lock_bh(dev);
- sky2_tx_complete(sky2, report);
- netif_tx_unlock_bh(dev);
- } else {
- printk(KERN_INFO PFX "hardware hung? flushing\n");
+ netif_poll_disable(hw->dev[0]); /* stop NAPI poll */
+ synchronize_irq(hw->pdev->irq);
- sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
- sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+ netif_start_queue(dev); /* don't wakeup during flush */
+ sky2_tx_complete(sky2, sky2->tx_prod); /* Flush transmit queue */
- sky2_tx_clean(dev);
+ sky2_write32(hw, B0_IMSK, imask);
- sky2_qset(hw, txq);
- sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
- }
+ sky2_phy_reinit(sky2); /* this clears flow control etc */
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
+ /* TSO on Yukon Ultra and MTU > 1500 not supported */
if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
- return -EINVAL;
+ dev->features &= ~NETIF_F_TSO;
if (!netif_running(dev)) {
dev->mtu = new_mtu;
goto force_update;
skb->protocol = eth_type_trans(skb, dev);
+ sky2->net_stats.rx_packets++;
+ sky2->net_stats.rx_bytes += skb->len;
dev->last_rx = jiffies;
#ifdef SKY2_VLAN_TAG_USED
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
- pci_name(hw->pdev), pci_err);
+ dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n",
+ pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PCI_STATUS,
pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
- pci_name(hw->pdev), pex_err);
+ dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n",
+ pex_err);
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
switch (hw->chip_id) {
case CHIP_ID_YUKON_EC:
case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
return 125; /* 125 Mhz */
case CHIP_ID_YUKON_FE:
return 100; /* 100 Mhz */
}
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_init(struct sky2_hw *hw)
{
- u16 status;
u8 t8;
- int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
- printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
- pci_name(hw->pdev), hw->chip_id);
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
return -EOPNOTSUPP;
}
+ if (hw->chip_id == CHIP_ID_YUKON_EX)
+ dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n"
+ "Please report success or failure to <netdev@vger.kernel.org>\n");
+
+ /* Make sure and enable all clocks */
+ if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
/* This rev is really old, and requires untested workarounds */
if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
- printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n",
- pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
- hw->chip_id, hw->chip_rev);
+ dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
+ yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
+ hw->chip_id, hw->chip_rev);
return -EOPNOTSUPP;
}
+ hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+ hw->ports = 1;
+ t8 = sky2_read8(hw, B2_Y2_HW_RES);
+ if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+ ++hw->ports;
+ }
+
+ return 0;
+}
+
+static void sky2_reset(struct sky2_hw *hw)
+{
+ u16 status;
+ int i;
+
/* disable ASF */
if (hw->chip_id <= CHIP_ID_YUKON_EC) {
- sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ if (hw->chip_id == CHIP_ID_YUKON_EX) {
+ status = sky2_read16(hw, HCU_CCSR);
+ status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
+ HCU_CCSR_UC_STATE_MSK);
+ sky2_write16(hw, HCU_CCSR, status);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
}
sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
- hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
- hw->ports = 1;
- t8 = sky2_read8(hw, B2_Y2_HW_RES);
- if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
- if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
- ++hw->ports;
- }
-
sky2_power_on(hw);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
+{
+ return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
+}
+
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+
+ wol->supported = sky2_wol_supported(sky2->hw);
+ wol->wolopts = sky2->wol;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
+ return -EOPNOTSUPP;
+
+ sky2->wol = wol->wolopts;
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_write32(hw, B0_CTST, sky2->wol
+ ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+
+ if (!netif_running(dev))
+ sky2_wol_init(sky2);
return 0;
}
}
}
-/* Use hardware MIB variables for critical path statistics and
- * transmit feedback not reported at interrupt.
- * Other errors are accounted for in interrupt handler.
- */
static struct net_device_stats *sky2_get_stats(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
- u64 data[13];
-
- sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
-
- sky2->net_stats.tx_bytes = data[0];
- sky2->net_stats.rx_bytes = data[1];
- sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
- sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
- sky2->net_stats.multicast = data[3] + data[5];
- sky2->net_stats.collisions = data[10];
- sky2->net_stats.tx_aborted_errors = data[12];
-
return &sky2->net_stats;
}
static const struct ethtool_ops sky2_ethtool_ops = {
.get_settings = sky2_get_settings,
.set_settings = sky2_set_settings,
- .get_drvinfo = sky2_get_drvinfo,
+ .get_drvinfo = sky2_get_drvinfo,
+ .get_wol = sky2_get_wol,
+ .set_wol = sky2_set_wol,
.get_msglevel = sky2_get_msglevel,
.set_msglevel = sky2_set_msglevel,
.nway_reset = sky2_nway_reset,
/* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
- unsigned port, int highmem)
+ unsigned port,
+ int highmem, int wol)
{
struct sky2_port *sky2;
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
if (!dev) {
- printk(KERN_ERR "sky2 etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed");
return NULL;
}
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
sky2->rx_csum = 1;
+ sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->port = port;
- if (hw->chip_id != CHIP_ID_YUKON_EC_U)
- dev->features |= NETIF_F_TSO;
+ dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
#ifdef SKY2_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
return err;
}
if (!hw->msi) {
/* MSI test failed, go back to INTx mode */
- printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
- "switching to INTx mode.\n",
- pci_name(pdev));
+ dev_info(&pdev->dev, "No interrupt generated using MSI, "
+ "switching to INTx mode.\n");
err = -EOPNOTSUPP;
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
return err;
}
+static int __devinit pci_wake_enabled(struct pci_dev *dev)
+{
+ int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ u16 value;
+
+ if (!pm)
+ return 0;
+ if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
+ return 0;
+ return value & PCI_PM_CTRL_PME_ENABLE;
+}
+
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- struct net_device *dev, *dev1 = NULL;
+ struct net_device *dev;
struct sky2_hw *hw;
- int err, using_dac = 0;
+ int err, using_dac = 0, wol_default;
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "%s cannot enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
goto err_out;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
goto err_out;
}
using_dac = 1;
err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
- printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA "
- "for consistent allocations\n", pci_name(pdev));
+ dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
+ "for consistent allocations\n");
goto err_out_free_regions;
}
-
} else {
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
- printk(KERN_ERR PFX "%s no usable DMA configuration\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_out_free_regions;
}
}
+ wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
+
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
- printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
- printk(KERN_ERR PFX "%s: cannot map device registers\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot map device registers\n");
goto err_out_free_hw;
}
if (!hw->st_le)
goto err_out_iounmap;
- err = sky2_reset(hw);
+ err = sky2_init(hw);
if (err)
goto err_out_iounmap;
- printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
+ dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
hw->chip_id, hw->chip_rev);
- dev = sky2_init_netdev(hw, 0, using_dac);
- if (!dev)
+ sky2_reset(hw);
+
+ dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
+ if (!dev) {
+ err = -ENOMEM;
goto err_out_free_pci;
+ }
if (!disable_msi && pci_enable_msi(pdev) == 0) {
err = sky2_test_msi(hw);
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "%s: cannot register net device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot register net device\n");
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
dev->name, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
goto err_out_unregister;
}
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
sky2_show_addr(dev);
- if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
- if (register_netdev(dev1) == 0)
- sky2_show_addr(dev1);
- else {
- /* Failure to register second port need not be fatal */
- printk(KERN_WARNING PFX
- "register of second port failed\n");
+ if (hw->ports > 1) {
+ struct net_device *dev1;
+
+ dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
+ if (!dev1)
+ dev_warn(&pdev->dev, "allocation for second device failed\n");
+ else if ((err = register_netdev(dev1))) {
+ dev_warn(&pdev->dev,
+ "register of second port failed (%d)\n", err);
hw->dev[1] = NULL;
free_netdev(dev1);
- }
+ } else
+ sky2_show_addr(dev1);
}
setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
- int i;
+ int i, wol = 0;
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (netif_running(dev))
sky2_down(dev);
- netif_device_detach(dev);
- }
+
+ if (sky2->wol)
+ sky2_wol_init(sky2);
+
+ wol |= sky2->wol;
}
sky2_write32(hw, B0_IMSK, 0);
sky2_power_aux(hw);
+
pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
goto out;
pci_enable_wake(pdev, PCI_D0, 0);
-
- err = sky2_reset(hw);
- if (err)
- goto out;
+ sky2_reset(hw);
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
if (netif_running(dev)) {
- netif_device_attach(dev);
-
err = sky2_up(dev);
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
sky2_idle_start(hw);
return 0;
out:
- printk(KERN_ERR PFX "%s: resume failed (%d)\n", pci_name(pdev), err);
+ dev_err(&pdev->dev, "resume failed (%d)\n", err);
pci_disable_device(pdev);
return err;
}
#endif
+static void sky2_shutdown(struct pci_dev *pdev)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i, wol = 0;
+
+ del_timer_sync(&hw->idle_timer);
+ netif_poll_disable(hw->dev[0]);
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol) {
+ wol = 1;
+ sky2_wol_init(sky2);
+ }
+ }
+
+ if (wol)
+ sky2_power_aux(hw);
+
+ pci_enable_wake(pdev, PCI_D3hot, wol);
+ pci_enable_wake(pdev, PCI_D3cold, wol);
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
static struct pci_driver sky2_driver = {
.name = DRV_NAME,
.id_table = sky2_id_table,
.suspend = sky2_suspend,
.resume = sky2_resume,
#endif
+ .shutdown = sky2_shutdown,
};
static int __init sky2_init_module(void)