if (netif_running(dev)) {
ecmd->speed = adapter->link_speed;
ecmd->duplex = adapter->link_duplex;
- } else
- return -EIO; /* link absent */
+ ecmd->autoneg = adapter->link_autoneg;
+ }
+
} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
- ecmd->supported = (SUPPORTED_TP |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_10000baseT_Full);
- ecmd->advertising = (ADVERTISED_TP |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_10000baseT_Full);
+ u32 val;
+
+ adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4);
+ if (val == NETXEN_PORT_MODE_802_3_AP) {
+ ecmd->supported = SUPPORTED_1000baseT_Full;
+ ecmd->advertising = ADVERTISED_1000baseT_Full;
+ } else {
+ ecmd->supported = SUPPORTED_10000baseT_Full;
+ ecmd->advertising = ADVERTISED_10000baseT_Full;
+ }
+
ecmd->port = PORT_TP;
- ecmd->speed = SPEED_10000;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ u16 pcifn = adapter->ahw.pci_func;
+
+ adapter->hw_read_wx(adapter,
+ P3_LINK_SPEED_REG(pcifn), &val, 4);
+ ecmd->speed = P3_LINK_SPEED_MHZ *
+ P3_LINK_SPEED_VAL(pcifn, val);
+ } else
+ ecmd->speed = SPEED_10000;
+
ecmd->duplex = DUPLEX_FULL;
ecmd->autoneg = AUTONEG_DISABLE;
} else
break;
case NETXEN_BRDTYPE_P2_SB31_10G:
case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
+ case NETXEN_BRDTYPE_P3_10G_SFP_CT:
+ case NETXEN_BRDTYPE_P3_10G_SFP_QT:
case NETXEN_BRDTYPE_P3_10G_XFP:
ecmd->supported |= SUPPORTED_FIBRE;
ecmd->advertising |= ADVERTISED_FIBRE;
return 0;
}
+static u32 netxen_nic_get_tso(struct net_device *dev)
+{
+ struct netxen_adapter *adapter = netdev_priv(dev);
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ return (dev->features & (NETIF_F_TSO | NETIF_F_TSO6)) != 0;
+
+ return (dev->features & NETIF_F_TSO) != 0;
+}
+
+static int netxen_nic_set_tso(struct net_device *dev, u32 data)
+{
+ if (data) {
+ struct netxen_adapter *adapter = netdev_priv(dev);
+
+ dev->features |= NETIF_F_TSO;
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ dev->features |= NETIF_F_TSO6;
+ } else
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+
+ return 0;
+}
+
+/*
+ * Set the coalescing parameters. Currently only normal is supported.
+ * If rx_coalesce_usecs == 0 or rx_max_coalesced_frames == 0 then set the
+ * firmware coalescing to default.
+ */
+static int netxen_set_intr_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ethcoal)
+{
+ struct netxen_adapter *adapter = netdev_priv(netdev);
+
+ if (!NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ return -EINVAL;
+
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return -EINVAL;
+
+ /*
+ * Return Error if unsupported values or
+ * unsupported parameters are set.
+ */
+ if (ethcoal->rx_coalesce_usecs > 0xffff ||
+ ethcoal->rx_max_coalesced_frames > 0xffff ||
+ ethcoal->tx_coalesce_usecs > 0xffff ||
+ ethcoal->tx_max_coalesced_frames > 0xffff ||
+ ethcoal->rx_coalesce_usecs_irq ||
+ ethcoal->rx_max_coalesced_frames_irq ||
+ ethcoal->tx_coalesce_usecs_irq ||
+ ethcoal->tx_max_coalesced_frames_irq ||
+ ethcoal->stats_block_coalesce_usecs ||
+ ethcoal->use_adaptive_rx_coalesce ||
+ ethcoal->use_adaptive_tx_coalesce ||
+ ethcoal->pkt_rate_low ||
+ ethcoal->rx_coalesce_usecs_low ||
+ ethcoal->rx_max_coalesced_frames_low ||
+ ethcoal->tx_coalesce_usecs_low ||
+ ethcoal->tx_max_coalesced_frames_low ||
+ ethcoal->pkt_rate_high ||
+ ethcoal->rx_coalesce_usecs_high ||
+ ethcoal->rx_max_coalesced_frames_high ||
+ ethcoal->tx_coalesce_usecs_high ||
+ ethcoal->tx_max_coalesced_frames_high)
+ return -EINVAL;
+
+ if (!ethcoal->rx_coalesce_usecs ||
+ !ethcoal->rx_max_coalesced_frames) {
+ adapter->coal.flags = NETXEN_NIC_INTR_DEFAULT;
+ adapter->coal.normal.data.rx_time_us =
+ NETXEN_DEFAULT_INTR_COALESCE_RX_TIME_US;
+ adapter->coal.normal.data.rx_packets =
+ NETXEN_DEFAULT_INTR_COALESCE_RX_PACKETS;
+ } else {
+ adapter->coal.flags = 0;
+ adapter->coal.normal.data.rx_time_us =
+ ethcoal->rx_coalesce_usecs;
+ adapter->coal.normal.data.rx_packets =
+ ethcoal->rx_max_coalesced_frames;
+ }
+ adapter->coal.normal.data.tx_time_us = ethcoal->tx_coalesce_usecs;
+ adapter->coal.normal.data.tx_packets =
+ ethcoal->tx_max_coalesced_frames;
+
+ netxen_config_intr_coalesce(adapter);
+
+ return 0;
+}
+
+static int netxen_get_intr_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ethcoal)
+{
+ struct netxen_adapter *adapter = netdev_priv(netdev);
+
+ if (!NX_IS_REVISION_P3(adapter->ahw.revision_id))
+ return -EINVAL;
+
+ if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC)
+ return -EINVAL;
+
+ ethcoal->rx_coalesce_usecs = adapter->coal.normal.data.rx_time_us;
+ ethcoal->tx_coalesce_usecs = adapter->coal.normal.data.tx_time_us;
+ ethcoal->rx_max_coalesced_frames =
+ adapter->coal.normal.data.rx_packets;
+ ethcoal->tx_max_coalesced_frames =
+ adapter->coal.normal.data.tx_packets;
+
+ return 0;
+}
+
struct ethtool_ops netxen_nic_ethtool_ops = {
.get_settings = netxen_nic_get_settings,
.set_settings = netxen_nic_set_settings,
.set_pauseparam = netxen_nic_set_pauseparam,
.set_tx_csum = ethtool_op_set_tx_csum,
.set_sg = ethtool_op_set_sg,
- .set_tso = ethtool_op_set_tso,
+ .get_tso = netxen_nic_get_tso,
+ .set_tso = netxen_nic_set_tso,
.self_test = netxen_nic_diag_test,
.get_strings = netxen_nic_get_strings,
.get_ethtool_stats = netxen_nic_get_ethtool_stats,
.get_sset_count = netxen_get_sset_count,
.get_rx_csum = netxen_nic_get_rx_csum,
.set_rx_csum = netxen_nic_set_rx_csum,
+ .get_coalesce = netxen_get_intr_coalesce,
+ .set_coalesce = netxen_set_intr_coalesce,
};
projects / linux-2.6 / blobdiff