2) The existing myriad of other Linux 8390 drivers by Donald Becker.
3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
- The NE3210 is an EISA shared memory NS8390 implementation. Shared
+ The NE3210 is an EISA shared memory NS8390 implementation. Shared
memory address > 1MB should work with this driver.
- Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
+ Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
around (or perhaps there are some defective/backwards cards ???)
This driver WILL NOT WORK FOR THE NE3200 - it is completely different
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/mm.h>
#include <asm/io.h>
#include <asm/system.h>
int i, retval, port_index;
struct eisa_device *edev = to_eisa_device (device);
struct net_device *dev;
+ DECLARE_MAC_BUF(mac);
/* Allocate dev->priv and fill in 8390 specific dev fields. */
if (!(dev = alloc_ei_netdev ())) {
return -ENOMEM;
}
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, device);
device->driver_data = dev;
ioaddr = edev->base_addr;
inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
#endif
-
port_index = inb(ioaddr + NE3210_CFG2) >> 6;
- printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr:",
- edev->slot, ifmap[port_index]);
for(i = 0; i < ETHER_ADDR_LEN; i++)
- printk(" %02x", (dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i)));
-
+ dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
+ printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %s.\n",
+ edev->slot, ifmap[port_index], print_mac(mac, dev->dev_addr));
/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
- printk(".\nne3210.c: using IRQ %d, ", dev->irq);
+ printk("ne3210.c: using IRQ %d, ", dev->irq);
retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
if (retval) {
goto out3;
}
}
-
+
if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
phys_mem);
goto out3;
}
-
+
printk("%dkB memory at physical address %#lx\n",
NE3210_STOP_PG/4, phys_mem);
if ((retval = register_netdev (dev)))
goto out5;
-
+
NS8390_init(dev, 0);
return 0;
release_region (ioaddr, NE3210_IO_EXTENT);
out:
free_netdev (dev);
-
+
return retval;
}
hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */
}
-/*
+/*
* Block input and output are easy on shared memory ethercards, the only
* complication is when the ring buffer wraps. The count will already
* be rounded up to a doubleword value via ne3210_get_8390_hdr() above.
{ "NVL1801" },
{ "" },
};
+MODULE_DEVICE_TABLE(eisa, ne3210_ids);
static struct eisa_driver ne3210_eisa_driver = {
.id_table = ne3210_ids,