Changelog:
Mike Cruse : mcruse@cti-ltd.com
- : Changes for Linux 2.0 compatibility.
+ : Changes for Linux 2.0 compatibility.
: Added dev_id parameter in net_interrupt(),
: request_irq() and free_irq(). Just NULL for now.
Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
: in net_open() and net_close() so kerneld would know
- : that the module is in use and wouldn't eject the
+ : that the module is in use and wouldn't eject the
: driver prematurely.
Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
: as an example. Disabled autoprobing in init_module(),
: not a good thing to do to other devices while Linux
: is running from all accounts.
-
+
Alan Cox : Removed 1.2 support, added 2.1 extra counters.
David Huggins-Daines <dhd@debian.org>
-
+
Split this off into mac89x0.c, and gutted it of all parts which are
not relevant to the existing CS8900 cards on the Macintosh
(i.e. basically the Daynaport CS and LC cards). To be precise:
extern void reset_chip(struct net_device *dev);
#endif
static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id);
static void set_multicast_list(struct net_device *dev);
static void net_rx(struct net_device *dev);
static int net_close(struct net_device *dev);
{
unsigned long flags;
int card_present;
-
+
local_irq_save(flags);
card_present = hwreg_present((void*) ioaddr+4)
&& hwreg_present((void*) ioaddr + DATA_PORT);
/* Fill in the 'dev' fields. */
dev->base_addr = ioaddr;
- dev->mem_start = (unsigned long)
+ dev->mem_start = (unsigned long)
nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
dev->mem_end = dev->mem_start + 0x1000;
static int
net_send_packet(struct sk_buff *skb, struct net_device *dev)
{
- if (dev->tbusy) {
- /* If we get here, some higher level has decided we are broken.
- There should really be a "kick me" function call instead. */
- int tickssofar = jiffies - dev->trans_start;
- if (tickssofar < 5)
- return 1;
- if (net_debug > 0) printk("%s: transmit timed out, %s?\n", dev->name,
- tx_done(dev) ? "IRQ conflict" : "network cable problem");
- /* Try to restart the adaptor. */
- dev->tbusy=0;
- dev->trans_start = jiffies;
- }
-
- /* Block a timer-based transmit from overlapping. This could better be
- done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
- if (test_and_set_bit(0, (void*)&dev->tbusy) != 0)
- printk("%s: Transmitter access conflict.\n", dev->name);
- else {
- struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-
- if (net_debug > 3)
- printk("%s: sent %d byte packet of type %x\n",
- dev->name, skb->len,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
- | skb->data[ETH_ALEN+ETH_ALEN+1]);
-
- /* keep the upload from being interrupted, since we
- ask the chip to start transmitting before the
- whole packet has been completely uploaded. */
- local_irq_save(flags);
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
- /* initiate a transmit sequence */
- writereg(dev, PP_TxCMD, lp->send_cmd);
- writereg(dev, PP_TxLength, skb->len);
+ if (net_debug > 3)
+ printk("%s: sent %d byte packet of type %x\n",
+ dev->name, skb->len,
+ (skb->data[ETH_ALEN+ETH_ALEN] << 8)
+ | skb->data[ETH_ALEN+ETH_ALEN+1]);
- /* Test to see if the chip has allocated memory for the packet */
- if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
- /* Gasp! It hasn't. But that shouldn't happen since
- we're waiting for TxOk, so return 1 and requeue this packet. */
- local_irq_restore(flags);
- return 1;
- }
+ /* keep the upload from being interrupted, since we
+ ask the chip to start transmitting before the
+ whole packet has been completely uploaded. */
+ local_irq_save(flags);
+ netif_stop_queue(dev);
- /* Write the contents of the packet */
- memcpy_toio(dev->mem_start + PP_TxFrame, skb->data, skb->len+1);
+ /* initiate a transmit sequence */
+ writereg(dev, PP_TxCMD, lp->send_cmd);
+ writereg(dev, PP_TxLength, skb->len);
+ /* Test to see if the chip has allocated memory for the packet */
+ if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
+ /* Gasp! It hasn't. But that shouldn't happen since
+ we're waiting for TxOk, so return 1 and requeue this packet. */
local_irq_restore(flags);
- dev->trans_start = jiffies;
+ return 1;
}
+
+ /* Write the contents of the packet */
+ skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
+ skb->len+1);
+
+ local_irq_restore(flags);
+ dev->trans_start = jiffies;
dev_kfree_skb (skb);
return 0;
}
-\f
+
/* The typical workload of the driver:
Handle the network interface interrupts. */
-static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+static irqreturn_t net_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct net_local *lp;
printk ("net_interrupt(): irq %d for unknown device.\n", irq);
return IRQ_NONE;
}
- if (dev->interrupt)
- printk("%s: Re-entering the interrupt handler.\n", dev->name);
- dev->interrupt = 1;
ioaddr = dev->base_addr;
lp = netdev_priv(dev);
break;
case ISQ_TRANSMITTER_EVENT:
lp->stats.tx_packets++;
- dev->tbusy = 0;
- mark_bh(NET_BH); /* Inform upper layers. */
+ netif_wake_queue(dev);
if ((status & TX_OK) == 0) lp->stats.tx_errors++;
if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
That shouldn't happen since we only ever
load one packet. Shrug. Do the right
thing anyway. */
- dev->tbusy = 0;
- mark_bh(NET_BH); /* Inform upper layers. */
+ netif_wake_queue(dev);
}
if (status & TX_UNDERRUN) {
if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
break;
}
}
- dev->interrupt = 0;
return IRQ_HANDLED;
}
return;
}
skb_put(skb, length);
- skb->dev = dev;
- memcpy_fromio(skb->data, dev->mem_start + PP_RxFrame, length);
+ skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
+ length);
if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
dev->name, length,
/* The multicast-accept list is initialized to accept-all, and we
rely on higher-level filtering for now. */
lp->rx_mode = RX_MULTCAST_ACCEPT;
- }
+ }
else
lp->rx_mode = 0;
static int set_mac_address(struct net_device *dev, void *addr)
{
int i;
- if (dev->start)
- return -EBUSY;
printk("%s: Setting MAC address to ", dev->name);
for (i = 0; i < 6; i++)
printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
free_netdev(dev_cs89x0);
}
#endif /* MODULE */
-\f
+
/*
* Local variables:
* compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h -c -o mac89x0.o mac89x0.c"