ixbge: Make ethtool code account for media types

[linux-2.6] / drivers / net / ixgbe / ixgbe_ethtool.c

diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 9f3cdb8730013045d2996524b754e5904647efde..b447dd7de3475bfd597f4fc6c3080f2deaac8ea1 100644 (file)
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -103,21 +103,41 @@ static int ixgbe_get_settings(struct net_device *netdev,
                              struct ethtool_cmd *ecmd)
 {
        struct ixgbe_adapter *adapter = netdev_priv(netdev);
+       struct ixgbe_hw *hw = &adapter->hw;
+       u32 link_speed = 0;
+       bool link_up;
 
-       ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
-       ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
-       ecmd->port = PORT_FIBRE;
+       ecmd->supported = SUPPORTED_10000baseT_Full;
+       ecmd->autoneg = AUTONEG_ENABLE;
        ecmd->transceiver = XCVR_EXTERNAL;
+       if (hw->phy.media_type == ixgbe_media_type_copper) {
+               ecmd->supported |= (SUPPORTED_1000baseT_Full |
+                                   SUPPORTED_TP | SUPPORTED_Autoneg);
+
+               ecmd->advertising = (ADVERTISED_TP | ADVERTISED_Autoneg);
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+                       ecmd->advertising |= ADVERTISED_10000baseT_Full;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+                       ecmd->advertising |= ADVERTISED_1000baseT_Full;
+
+               ecmd->port = PORT_TP;
+       } else {
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising = (ADVERTISED_10000baseT_Full |
+                                    ADVERTISED_FIBRE);
+               ecmd->port = PORT_FIBRE;
+       }
 
-       if (netif_carrier_ok(adapter->netdev)) {
-               ecmd->speed = SPEED_10000;
+       adapter->hw.mac.ops.check_link(hw, &(link_speed), &link_up);
+       if (link_up) {
+               ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+                               SPEED_10000 : SPEED_1000;
                ecmd->duplex = DUPLEX_FULL;
        } else {
                ecmd->speed = -1;
                ecmd->duplex = -1;
        }
 
-       ecmd->autoneg = AUTONEG_DISABLE;
        return 0;
 }
 
@@ -125,17 +145,17 @@ static int ixgbe_set_settings(struct net_device *netdev,
                              struct ethtool_cmd *ecmd)
 {
        struct ixgbe_adapter *adapter = netdev_priv(netdev);
+       struct ixgbe_hw *hw = &adapter->hw;
 
-       if (ecmd->autoneg == AUTONEG_ENABLE ||
-           ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
-               return -EINVAL;
-
-       if (netif_running(adapter->netdev)) {
-               ixgbe_down(adapter);
-               ixgbe_reset(adapter);
-               ixgbe_up(adapter);
-       } else {
-               ixgbe_reset(adapter);
+       switch (hw->phy.media_type) {
+       case ixgbe_media_type_fiber:
+               if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+                   (ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+                       return -EINVAL;
+               /* in this case we currently only support 10Gb/FULL */
+               break;
+       default:
+               break;
        }
 
        return 0;