*
* Driver for PowerPC 4xx on-chip ethernet controller.
*
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * Based on the arch/ppc version of the driver:
+ *
* Copyright (c) 2004, 2005 Zultys Technologies.
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
*
#include <linux/mii.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
+#include <linux/of.h>
#include <asm/processor.h>
#include <asm/io.h>
static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_size)
{
u32 ret = EMAC_MR1_VLE | EMAC_MR1_IST | EMAC4_MR1_TR |
- EMAC4_MR1_OBCI(dev->opb_bus_freq);
+ EMAC4_MR1_OBCI(dev->opb_bus_freq / 1000000);
DBG2(dev, "__emac4_calc_base_mr1" NL);
{
struct emac_regs __iomem *p = dev->emacp;
struct net_device *ndev = dev->ndev;
- int tx_size, rx_size;
+ int tx_size, rx_size, link = netif_carrier_ok(dev->ndev);
u32 r, mr1 = 0;
DBG(dev, "configure" NL);
- if (emac_reset(dev) < 0)
+ if (!link) {
+ out_be32(&p->mr1, in_be32(&p->mr1)
+ | EMAC_MR1_FDE | EMAC_MR1_ILE);
+ udelay(100);
+ } else if (emac_reset(dev) < 0)
return -ETIMEDOUT;
if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
tah_reset(dev->tah_dev);
- DBG(dev, " duplex = %d, pause = %d, asym_pause = %d\n",
- dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause);
+ DBG(dev, " link = %d duplex = %d, pause = %d, asym_pause = %d\n",
+ link, dev->phy.duplex, dev->phy.pause, dev->phy.asym_pause);
/* Default fifo sizes */
tx_size = dev->tx_fifo_size;
rx_size = dev->rx_fifo_size;
+ /* No link, force loopback */
+ if (!link)
+ mr1 = EMAC_MR1_FDE | EMAC_MR1_ILE;
+
/* Check for full duplex */
- if (dev->phy.duplex == DUPLEX_FULL)
+ else if (dev->phy.duplex == DUPLEX_FULL)
mr1 |= EMAC_MR1_FDE | EMAC_MR1_MWSW_001;
/* Adjust fifo sizes, mr1 and timeouts based on link speed */
r = EMAC_STACR_BASE(dev->opb_bus_freq);
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
r |= EMAC_STACR_OC;
- if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR))
+ if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
r |= EMACX_STACR_STAC_READ;
else
r |= EMAC_STACR_STAC_READ;
r = EMAC_STACR_BASE(dev->opb_bus_freq);
if (emac_has_feature(dev, EMAC_FTR_STACR_OC_INVERT))
r |= EMAC_STACR_OC;
- if (emac_has_feature(dev, EMAC_FTR_HAS_AXON_STACR))
+ if (emac_has_feature(dev, EMAC_FTR_HAS_NEW_STACR))
r |= EMACX_STACR_STAC_WRITE;
else
r |= EMAC_STACR_STAC_WRITE;
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
- emac_reinitialize(dev);
netif_carrier_off(dev->ndev);
netif_tx_disable(dev->ndev);
+ emac_reinitialize(dev);
emac_print_link_status(dev);
}
link_poll_interval = PHY_POLL_LINK_OFF;
return emac_xmit_finish(dev, len);
}
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
static inline int emac_xmit_split(struct emac_instance *dev, int slot,
u32 pd, int len, int last, u16 base_ctrl)
{
DBG2(dev, "stopped TX queue" NL);
return 1;
}
-#else
-# define emac_start_xmit_sg emac_start_xmit
-#endif /* !defined(CONFIG_IBM_NEW_EMAC_TAH) */
/* Tx lock BHs */
static void emac_parse_tx_error(struct emac_instance *dev, u16 ctrl)
if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0))
dev->tah_ph = 0;
if (emac_read_uint_prop(np, "tah-channel", &dev->tah_port, 0))
- dev->tah_ph = 0;
+ dev->tah_port = 0;
if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0))
dev->mdio_ph = 0;
if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0))
/* Check EMAC version */
if (of_device_is_compatible(np, "ibm,emac4"))
dev->features |= EMAC_FTR_EMAC4;
- if (of_device_is_compatible(np, "ibm,emac-axon")
- || of_device_is_compatible(np, "ibm,emac-440epx"))
- dev->features |= EMAC_FTR_HAS_AXON_STACR
- | EMAC_FTR_STACR_OC_INVERT;
- if (of_device_is_compatible(np, "ibm,emac-440spe"))
+
+ /* Fixup some feature bits based on the device tree */
+ if (of_get_property(np, "has-inverted-stacr-oc", NULL))
dev->features |= EMAC_FTR_STACR_OC_INVERT;
+ if (of_get_property(np, "has-new-stacr-staopc", NULL))
+ dev->features |= EMAC_FTR_HAS_NEW_STACR;
- /* Fixup some feature bits based on the device tree and verify
- * we have support for them compiled in
- */
+ /* CAB lacks the appropriate properties */
+ if (of_device_is_compatible(np, "ibm,emac-axon"))
+ dev->features |= EMAC_FTR_HAS_NEW_STACR |
+ EMAC_FTR_STACR_OC_INVERT;
+
+ /* Enable TAH/ZMII/RGMII features as found */
if (dev->tah_ph != 0) {
#ifdef CONFIG_IBM_NEW_EMAC_TAH
dev->features |= EMAC_FTR_HAS_TAH;
struct device_node **blist = NULL;
int err, i;
+ /* Skip unused/unwired EMACS */
+ if (of_get_property(np, "unused", NULL))
+ return -ENODEV;
+
/* Find ourselves in the bootlist if we are there */
for (i = 0; i < EMAC_BOOT_LIST_SIZE; i++)
if (emac_boot_list[i] == np)
/* Fill in the driver function table */
ndev->open = &emac_open;
-#ifdef CONFIG_IBM_NEW_EMAC_TAH
- if (dev->tah_dev) {
- ndev->hard_start_xmit = &emac_start_xmit_sg;
+ if (dev->tah_dev)
ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- } else
-#endif
- ndev->hard_start_xmit = &emac_start_xmit;
ndev->tx_timeout = &emac_tx_timeout;
ndev->watchdog_timeo = 5 * HZ;
ndev->stop = &emac_close;
ndev->set_multicast_list = &emac_set_multicast_list;
ndev->do_ioctl = &emac_ioctl;
if (emac_phy_supports_gige(dev->phy_mode)) {
+ ndev->hard_start_xmit = &emac_start_xmit_sg;
ndev->change_mtu = &emac_change_mtu;
dev->commac.ops = &emac_commac_sg_ops;
+ } else {
+ ndev->hard_start_xmit = &emac_start_xmit;
}
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
projects / linux-2.6 / blobdiff