#include <asm/processor.h> /* Processor type for cache alignment. */
#include <asm/io.h>
#include <asm/uaccess.h>
+#include <asm/byteorder.h>
/* These identify the driver base version and may not be removed. */
static char version[] =
MODULE_DESCRIPTION("Myson MTD-8xx 100/10M Ethernet PCI Adapter Driver");
MODULE_LICENSE("GPL");
module_param(max_interrupt_work, int, 0);
-//MODULE_PARM(min_pci_latency, "i");
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
module_param(multicast_filter_limit, int, 0);
#else
int bar = 1;
#endif
+ DECLARE_MAC_BUF(mac);
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
err = -ENOMEM;
goto err_out_unmap;
}
- SET_MODULE_OWNER(dev);
SET_NETDEV_DEV(dev, &pdev->dev);
/* read ethernet id */
if (err)
goto err_out_free_tx;
- printk(KERN_INFO "%s: %s at %p, ",
- dev->name, skel_netdrv_tbl[chip_id].chip_name, ioaddr);
- for (i = 0; i < 5; i++)
- printk("%2.2x:", dev->dev_addr[i]);
- printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
+ printk(KERN_INFO "%s: %s at %p, %s, IRQ %d.\n",
+ dev->name, skel_netdrv_tbl[chip_id].chip_name, ioaddr,
+ print_mac(mac, dev->dev_addr), irq);
return 0;
Wait the specified 50 PCI cycles after a reset by initializing
Tx and Rx queues and the address filter list.
FIXME (Ueimor): optimistic for alpha + posted writes ? */
-#if defined(__powerpc__) || defined(__sparc__)
-// 89/9/1 modify,
-// np->bcrvalue=0x04 | 0x0x38; /* big-endian, 256 burst length */
- np->bcrvalue = 0x04 | 0x10; /* big-endian, tx 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#elif defined(__alpha__) || defined(__x86_64__)
-// 89/9/1 modify,
-// np->bcrvalue=0x38; /* little-endian, 256 burst length */
- np->bcrvalue = 0x10; /* little-endian, 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#elif defined(__i386__)
-#if defined(MODULE)
-// 89/9/1 modify,
-// np->bcrvalue=0x38; /* little-endian, 256 burst length */
+
np->bcrvalue = 0x10; /* little-endian, 8 burst length */
- np->crvalue = 0xe00; /* rx 128 burst length */
-#else
- /* When not a module we can work around broken '486 PCI boards. */
-#define x86 boot_cpu_data.x86
-// 89/9/1 modify,
-// np->bcrvalue=(x86 <= 4 ? 0x10 : 0x38);
- np->bcrvalue = 0x10;
- np->crvalue = (x86 <= 4 ? 0xa00 : 0xe00);
- if (x86 <= 4)
- printk(KERN_INFO "%s: This is a 386/486 PCI system, setting burst "
- "length to %x.\n", dev->name, (x86 <= 4 ? 0x10 : 0x38));
+#ifdef __BIG_ENDIAN
+ np->bcrvalue |= 0x04; /* big-endian */
#endif
-#else
-// 89/9/1 modify,
-// np->bcrvalue=0x38;
- np->bcrvalue = 0x10;
- np->crvalue = 0xe00; /* rx 128 burst length */
-#warning Processor architecture undefined!
+
+#if defined(__i386__) && !defined(MODULE)
+ if (boot_cpu_data.x86 <= 4)
+ np->crvalue = 0xa00;
+ else
#endif
+ np->crvalue = 0xe00; /* rx 128 burst length */
+
+
// 89/12/29 add,
// 90/1/16 modify,
// np->imrvalue=FBE|TUNF|CNTOVF|RBU|TI|RI;
.get_link = netdev_get_link,
.get_msglevel = netdev_get_msglevel,
.set_msglevel = netdev_set_msglevel,
- .get_sg = ethtool_op_get_sg,
- .get_tx_csum = ethtool_op_get_tx_csum,
};
static int mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)