* net_device_stats
* * introduced tx_timeout function
* * reworked locking
+ *
+ * 01-Jul-2005 Ben Dooks <ben@simtec.co.uk>
+ * * fixed spinlock call without pointer
+ * * ensure spinlock is initialised
*/
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/dm9000.h>
#include <linux/delay.h>
+#include <linux/platform_device.h>
#include <asm/delay.h>
#include <asm/irq.h>
static int dm9000_open(struct net_device *);
static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
static int dm9000_stop(struct net_device *);
-static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
static void dm9000_timer(unsigned long);
/* Save previous register address */
reg_save = readb(db->io_addr);
- spin_lock_irqsave(db->lock,flags);
+ spin_lock_irqsave(&db->lock,flags);
netif_stop_queue(dev);
dm9000_reset(db);
/* Restore previous register address */
writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(db->lock,flags);
+ spin_unlock_irqrestore(&db->lock,flags);
}
int i;
u32 id_val;
- printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
-
/* Init network device */
ndev = alloc_etherdev(sizeof (struct board_info));
if (!ndev) {
db = (struct board_info *) ndev->priv;
memset(db, 0, sizeof (*db));
+ spin_lock_init(&db->lock);
+
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
ndev->stop = &dm9000_stop;
ndev->get_stats = &dm9000_get_stats;
ndev->set_multicast_list = &dm9000_hash_table;
- ndev->do_ioctl = &dm9000_do_ioctl;
#ifdef DM9000_PROGRAM_EEPROM
program_eeprom(db);
/* set and active a timer process */
init_timer(&db->timer);
- db->timer.expires = DM9000_TIMER_WUT * 2;
+ db->timer.expires = DM9000_TIMER_WUT;
db->timer.data = (unsigned long) dev;
db->timer.function = &dm9000_timer;
add_timer(&db->timer);
return &db->stats;
}
-/*
- * Process the upper socket ioctl command
- */
-static int
-dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- PRINTK1("entering %s\n",__FUNCTION__);
- return 0;
-}
/*
* A periodic timer routine
{
struct net_device *dev = (struct net_device *) data;
board_info_t *db = (board_info_t *) dev->priv;
- u8 reg_save;
- unsigned long flags;
PRINTK3("dm9000_timer()\n");
- spin_lock_irqsave(db->lock,flags);
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
mii_check_media(&db->mii, netif_msg_link(db), 0);
- /* Restore previous register address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(db->lock,flags);
-
/* Set timer again */
db->timer.expires = DM9000_TIMER_WUT;
add_timer(&db->timer);
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
+ unsigned int reg_save;
int ret;
spin_lock_irqsave(&db->lock,flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
/* The read data keeps on REG_0D & REG_0E */
ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
spin_unlock_irqrestore(&db->lock,flags);
return ret;
{
board_info_t *db = (board_info_t *) dev->priv;
unsigned long flags;
+ unsigned long reg_save;
spin_lock_irqsave(&db->lock,flags);
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
udelay(500); /* Wait write complete */
iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
spin_unlock_irqrestore(&db->lock,flags);
}
static int
-dm9000_drv_suspend(struct device *dev, u32 state, u32 level)
+dm9000_drv_suspend(struct device *dev, pm_message_t state)
{
struct net_device *ndev = dev_get_drvdata(dev);
- if (ndev && level == SUSPEND_DISABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
netif_device_detach(ndev);
dm9000_shutdown(ndev);
}
static int
-dm9000_drv_resume(struct device *dev, u32 level)
+dm9000_drv_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
board_info_t *db = (board_info_t *) ndev->priv;
- if (ndev && level == RESUME_ENABLE) {
+ if (ndev) {
if (netif_running(ndev)) {
dm9000_reset(db);
static int __init
dm9000_init(void)
{
+ printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
return driver_register(&dm9000_driver); /* search board and register */
}