#define writesb outsb
#define writesw outsw
#define writesl outsl
-#define DEFAULT_TRIGGER IRQF_TRIGGER_HIGH
-#else
-#define DEFAULT_TRIGGER (0)
#endif
/*
if ((status & EPCR_ERRE) == 0)
break;
+ msleep(1);
+
if (timeout-- < 0) {
dev_dbg(db->dev, "timeout waiting EEPROM\n");
break;
dev_dbg(db->dev, "RST: RX Len:%x\n", RxLen);
}
- if (rxhdr.RxStatus & 0xbf) {
+ /* rxhdr.RxStatus is identical to RSR register. */
+ if (rxhdr.RxStatus & (RSR_FOE | RSR_CE | RSR_AE |
+ RSR_PLE | RSR_RWTO |
+ RSR_LCS | RSR_RF)) {
GoodPacket = false;
- if (rxhdr.RxStatus & 0x01) {
+ if (rxhdr.RxStatus & RSR_FOE) {
if (netif_msg_rx_err(db))
dev_dbg(db->dev, "fifo error\n");
dev->stats.rx_fifo_errors++;
}
- if (rxhdr.RxStatus & 0x02) {
+ if (rxhdr.RxStatus & RSR_CE) {
if (netif_msg_rx_err(db))
dev_dbg(db->dev, "crc error\n");
dev->stats.rx_crc_errors++;
}
- if (rxhdr.RxStatus & 0x80) {
+ if (rxhdr.RxStatus & RSR_RF) {
if (netif_msg_rx_err(db))
dev_dbg(db->dev, "length error\n");
dev->stats.rx_length_errors++;
/* If there is no IRQ type specified, default to something that
* may work, and tell the user that this is a problem */
- if (irqflags == IRQF_TRIGGER_NONE) {
+ if (irqflags == IRQF_TRIGGER_NONE)
dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
- irqflags = DEFAULT_TRIGGER;
- }
-
+
irqflags |= IRQF_SHARED;
if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
/* Fill the phyxcer register into REG_0C */
iow(db, DM9000_EPAR, DM9000_PHY | reg);
- iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock,flags);
iow(db, DM9000_EPDRL, value);
iow(db, DM9000_EPDRH, value >> 8);
- iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
writeb(reg_save, db->io_addr);
spin_unlock_irqrestore(&db->lock, flags);