#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/gpio.h>
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cpmac");
static int debug_level = 8;
static int dumb_switch;
return NETDEV_TX_OK;
len = max(skb->len, ETH_ZLEN);
- queue = skb->queue_mapping;
+ queue = skb_get_queue_mapping(skb);
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netif_stop_subqueue(dev, queue);
#else
int queue;
u32 status;
- if (!dev)
- return IRQ_NONE;
-
priv = netdev_priv(dev);
status = cpmac_read(priv->regs, CPMAC_MAC_INT_VECTOR);
struct cpmac_desc *desc;
struct sk_buff *skb;
- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link,
- 0, PHY_INTERFACE_MODE_MII);
- if (IS_ERR(priv->phy)) {
- if (netif_msg_drv(priv))
- printk(KERN_ERR "%s: Could not attach to PHY\n",
- dev->name);
- return PTR_ERR(priv->phy);
- }
-
mem = platform_get_resource_byname(priv->pdev, IORESOURCE_MEM, "regs");
if (!request_mem_region(mem->start, mem->end - mem->start, dev->name)) {
if (netif_msg_drv(priv))
release_mem_region(mem->start, mem->end - mem->start);
fail_reserve:
- phy_disconnect(priv->phy);
-
return res;
}
cancel_work_sync(&priv->reset_work);
napi_disable(&priv->napi);
phy_stop(priv->phy);
- phy_disconnect(priv->phy);
- priv->phy = NULL;
cpmac_hw_stop(dev);
static int __devinit cpmac_probe(struct platform_device *pdev)
{
- int rc, phy_id;
+ int rc, phy_id, i;
+ char *mdio_bus_id = "0";
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
}
if (phy_id == PHY_MAX_ADDR) {
- if (external_switch || dumb_switch)
+ if (external_switch || dumb_switch) {
+ struct fixed_phy_status status = {};
+
+ /*
+ * FIXME: this should be in the platform code!
+ * Since there is not platform code at all (that is,
+ * no mainline users of that driver), place it here
+ * for now.
+ */
phy_id = 0;
- else {
+ status.link = 1;
+ status.duplex = 1;
+ status.speed = 100;
+ fixed_phy_add(PHY_POLL, phy_id, &status);
+ } else {
printk(KERN_ERR "cpmac: no PHY present\n");
return -ENODEV;
}
priv->ring_size = 64;
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- if (phy_id == 31) {
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT,
- cpmac_mii.id, phy_id);
- } else
- snprintf(priv->phy_name, BUS_ID_SIZE, "fixed@%d:%d", 100, 1);
+
+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+
+ priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(priv->phy)) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: Could not attach to PHY\n",
+ dev->name);
+ return PTR_ERR(priv->phy);
+ }
if ((rc = register_netdev(dev))) {
printk(KERN_ERR "cpmac: error %i registering device %s\n", rc,
static struct platform_driver cpmac_driver = {
.driver.name = "cpmac",
+ .driver.owner = THIS_MODULE,
.probe = cpmac_probe,
.remove = __devexit_p(cpmac_remove),
};
}
cpmac_mii.phy_mask = ~(mask | 0x80000000);
+ snprintf(cpmac_mii.id, MII_BUS_ID_SIZE, "0");
res = mdiobus_register(&cpmac_mii);
if (res)