t1_sge_intr_error_handler(adapter->sge);
if (cause & FPGA_PCIX_INTERRUPT_GMAC)
- fpga_phy_intr_handler(adapter);
+ fpga_phy_intr_handler(adapter);
if (cause & FPGA_PCIX_INTERRUPT_TP) {
- /*
+ /*
* FPGA doesn't support MC4 interrupts and it requires
* this odd layer of indirection for MC5.
- */
+ */
u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
/* Clear TP interrupt */
udelay(10);
} while (busy && --attempts);
if (busy)
- CH_ALERT("%s: MDIO operation timed out\n",
- adapter->name);
+ CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
return busy;
}
}
#if defined(CONFIG_CHELSIO_T1_1G) || defined(CONFIG_CHELSIO_T1_COUGAR)
-static struct mdio_ops mi1_mdio_ops = {
- mi1_mdio_init,
- mi1_mdio_read,
- mi1_mdio_write
+static const struct mdio_ops mi1_mdio_ops = {
+ .init = mi1_mdio_init,
+ .read = mi1_mdio_read,
+ .write = mi1_mdio_write
};
#endif
return 0;
}
-static struct mdio_ops mi1_mdio_ext_ops = {
- mi1_mdio_init,
- mi1_mdio_ext_read,
- mi1_mdio_ext_write
+static const struct mdio_ops mi1_mdio_ext_ops = {
+ .init = mi1_mdio_init,
+ .read = mi1_mdio_ext_read,
+ .write = mi1_mdio_ext_write
};
enum {
CH_BRD_N204_4CU,
};
-static struct board_info t1_board[] = {
-
-{ CHBT_BOARD_CHT110, 1/*ports#*/,
- SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T1,
- CHBT_MAC_PM3393, CHBT_PHY_MY3126,
- 125000000/*clk-core*/, 150000000/*clk-mc3*/, 125000000/*clk-mc4*/,
- 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/,
- 1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops,
- &t1_my3126_ops, &mi1_mdio_ext_ops,
- "Chelsio T110 1x10GBase-CX4 TOE" },
-
-{ CHBT_BOARD_N110, 1/*ports#*/,
- SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
- CHBT_MAC_PM3393, CHBT_PHY_88X2010,
- 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
- 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
- 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
- &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
- "Chelsio N110 1x10GBaseX NIC" },
-
-{ CHBT_BOARD_N210, 1/*ports#*/,
- SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
- CHBT_MAC_PM3393, CHBT_PHY_88X2010,
- 125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
- 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
- 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
- &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
- "Chelsio N210 1x10GBaseX NIC" },
-
-{ CHBT_BOARD_CHT210, 1/*ports#*/,
- SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2,
- CHBT_MAC_PM3393, CHBT_PHY_88X2010,
- 125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/,
- 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
- 0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
- &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
- "Chelsio T210 1x10GBaseX TOE" },
-
-{ CHBT_BOARD_CHT210, 1/*ports#*/,
- SUPPORTED_10000baseT_Full /*caps*/, CHBT_TERM_T2,
- CHBT_MAC_PM3393, CHBT_PHY_MY3126,
- 125000000/*clk-core*/, 133000000/*clk-mc3*/, 125000000/*clk-mc4*/,
- 1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 1/*mdien*/,
- 1/*mdiinv*/, 1/*mdc*/, 1/*phybaseaddr*/, &t1_pm3393_ops,
- &t1_my3126_ops, &mi1_mdio_ext_ops,
- "Chelsio T210 1x10GBase-CX4 TOE" },
+static const struct board_info t1_board[] = {
+ {
+ .board = CHBT_BOARD_CHT110,
+ .port_number = 1,
+ .caps = SUPPORTED_10000baseT_Full,
+ .chip_term = CHBT_TERM_T1,
+ .chip_mac = CHBT_MAC_PM3393,
+ .chip_phy = CHBT_PHY_MY3126,
+ .clock_core = 125000000,
+ .clock_mc3 = 150000000,
+ .clock_mc4 = 125000000,
+ .espi_nports = 1,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 1,
+ .mdio_mdiinv = 1,
+ .mdio_mdc = 1,
+ .mdio_phybaseaddr = 1,
+ .gmac = &t1_pm3393_ops,
+ .gphy = &t1_my3126_ops,
+ .mdio_ops = &mi1_mdio_ext_ops,
+ .desc = "Chelsio T110 1x10GBase-CX4 TOE",
+ },
+
+ {
+ .board = CHBT_BOARD_N110,
+ .port_number = 1,
+ .caps = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
+ .chip_term = CHBT_TERM_T1,
+ .chip_mac = CHBT_MAC_PM3393,
+ .chip_phy = CHBT_PHY_88X2010,
+ .clock_core = 125000000,
+ .espi_nports = 1,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 0,
+ .mdio_mdiinv = 0,
+ .mdio_mdc = 1,
+ .mdio_phybaseaddr = 0,
+ .gmac = &t1_pm3393_ops,
+ .gphy = &t1_mv88x201x_ops,
+ .mdio_ops = &mi1_mdio_ext_ops,
+ .desc = "Chelsio N110 1x10GBaseX NIC",
+ },
+
+ {
+ .board = CHBT_BOARD_N210,
+ .port_number = 1,
+ .caps = SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE,
+ .chip_term = CHBT_TERM_T2,
+ .chip_mac = CHBT_MAC_PM3393,
+ .chip_phy = CHBT_PHY_88X2010,
+ .clock_core = 125000000,
+ .espi_nports = 1,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 0,
+ .mdio_mdiinv = 0,
+ .mdio_mdc = 1,
+ .mdio_phybaseaddr = 0,
+ .gmac = &t1_pm3393_ops,
+ .gphy = &t1_mv88x201x_ops,
+ .mdio_ops = &mi1_mdio_ext_ops,
+ .desc = "Chelsio N210 1x10GBaseX NIC",
+ },
+
+ {
+ .board = CHBT_BOARD_CHT210,
+ .port_number = 1,
+ .caps = SUPPORTED_10000baseT_Full,
+ .chip_term = CHBT_TERM_T2,
+ .chip_mac = CHBT_MAC_PM3393,
+ .chip_phy = CHBT_PHY_88X2010,
+ .clock_core = 125000000,
+ .clock_mc3 = 133000000,
+ .clock_mc4 = 125000000,
+ .espi_nports = 1,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 0,
+ .mdio_mdiinv = 0,
+ .mdio_mdc = 1,
+ .mdio_phybaseaddr = 0,
+ .gmac = &t1_pm3393_ops,
+ .gphy = &t1_mv88x201x_ops,
+ .mdio_ops = &mi1_mdio_ext_ops,
+ .desc = "Chelsio T210 1x10GBaseX TOE",
+ },
+
+ {
+ .board = CHBT_BOARD_CHT210,
+ .port_number = 1,
+ .caps = SUPPORTED_10000baseT_Full,
+ .chip_term = CHBT_TERM_T2,
+ .chip_mac = CHBT_MAC_PM3393,
+ .chip_phy = CHBT_PHY_MY3126,
+ .clock_core = 125000000,
+ .clock_mc3 = 133000000,
+ .clock_mc4 = 125000000,
+ .espi_nports = 1,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 1,
+ .mdio_mdiinv = 1,
+ .mdio_mdc = 1,
+ .mdio_phybaseaddr = 1,
+ .gmac = &t1_pm3393_ops,
+ .gphy = &t1_my3126_ops,
+ .mdio_ops = &mi1_mdio_ext_ops,
+ .desc = "Chelsio T210 1x10GBase-CX4 TOE",
+ },
#ifdef CONFIG_CHELSIO_T1_1G
-{ CHBT_BOARD_CHN204, 4/*ports#*/,
- SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
- SUPPORTED_PAUSE | SUPPORTED_TP /*caps*/, CHBT_TERM_T2, CHBT_MAC_VSC7321, CHBT_PHY_88E1111,
- 100000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
- 4/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
- 0/*mdiinv*/, 1/*mdc*/, 4/*phybaseaddr*/, &t1_vsc7326_ops,
- &t1_mv88e1xxx_ops, &mi1_mdio_ops,
- "Chelsio N204 4x100/1000BaseT NIC" },
+ {
+ .board = CHBT_BOARD_CHN204,
+ .port_number = 4,
+ .caps = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
+ SUPPORTED_PAUSE | SUPPORTED_TP,
+ .chip_term = CHBT_TERM_T2,
+ .chip_mac = CHBT_MAC_VSC7321,
+ .chip_phy = CHBT_PHY_88E1111,
+ .clock_core = 100000000,
+ .espi_nports = 4,
+ .clock_elmer0 = 44,
+ .mdio_mdien = 0,
+ .mdio_mdiinv = 0,
+ .mdio_mdc = 0,
+ .mdio_phybaseaddr = 4,
+ .gmac = &t1_vsc7326_ops,
+ .gphy = &t1_mv88e1xxx_ops,
+ .mdio_ops = &mi1_mdio_ops,
+ .desc = "Chelsio N204 4x100/1000BaseT NIC",
+ },
#endif
};
* written to the Control register. The hardware device will set the flag to a
* one when 4B have been transferred to the Data register.
*/
-int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
+int t1_seeprom_read(adapter_t *adapter, u32 addr, __le32 *data)
{
int i = EEPROM_MAX_POLL;
u16 val;
+ u32 v;
if (addr >= EEPROMSIZE || (addr & 3))
return -EINVAL;
adapter->name, addr);
return -EIO;
}
- pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
- *data = le32_to_cpu(*data);
+ pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, &v);
+ *data = cpu_to_le32(v);
return 0;
}
for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
ret = t1_seeprom_read(adapter, addr,
- (u32 *)((u8 *)vpd + addr));
+ (__le32 *)((u8 *)vpd + addr));
return ret;
}
switch (board_info(adapter)->board) {
#ifdef CONFIG_CHELSIO_T1_1G
- case CHBT_BOARD_CHT204:
- case CHBT_BOARD_CHT204E:
- case CHBT_BOARD_CHN204:
- case CHBT_BOARD_CHT204V: {
- int i, port_bit;
+ case CHBT_BOARD_CHT204:
+ case CHBT_BOARD_CHT204E:
+ case CHBT_BOARD_CHN204:
+ case CHBT_BOARD_CHT204V: {
+ int i, port_bit;
for_each_port(adapter, i) {
port_bit = i + 1;
- if (!(cause & (1 << port_bit))) continue;
+ if (!(cause & (1 << port_bit)))
+ continue;
- phy = adapter->port[i].phy;
+ phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, i);
}
- break;
- }
+ break;
+ }
case CHBT_BOARD_CHT101:
if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
phy = adapter->port[0].phy;
break;
case CHBT_BOARD_7500: {
int p;
- /*
+ /*
* Elmer0's interrupt cause isn't useful here because there is
* only one bit that can be set for all 4 ports. This means
* we are forced to check every PHY's interrupt status
* register to see who initiated the interrupt.
- */
- for_each_port(adapter, p) {
+ */
+ for_each_port(adapter, p) {
phy = adapter->port[p].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
break;
case CHBT_BOARD_8000:
case CHBT_BOARD_CHT110:
- CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
+ CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
cause);
if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
struct cmac *mac = adapter->port[0].mac;
t1_tpi_read(adapter,
A_ELMER0_GPI_STAT, &mod_detect);
- CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
+ CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
mod_detect ? "removed" : "inserted");
- }
+ }
break;
#ifdef CONFIG_CHELSIO_T1_COUGAR
case CHBT_BOARD_COUGAR:
for_each_port(adapter, i) {
port_bit = i ? i + 1 : 0;
- if (!(cause & (1 << port_bit))) continue;
+ if (!(cause & (1 << port_bit)))
+ continue;
phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
/* Disable PCIX & external chip interrupts. */
if (t1_is_asic(adapter))
- writel(0, adapter->regs + A_PL_ENABLE);
+ writel(0, adapter->regs + A_PL_ENABLE);
/* PCI-X interrupts */
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
if (cause & F_PL_INTR_PCIX)
t1_pci_intr_handler(adapter);
if (cause & F_PL_INTR_EXT)
- t1_elmer0_ext_intr_handler(adapter);
+ t1_elmer0_ext_intr(adapter);
/* Clear the interrupts just processed. */
writel(cause, adapter->regs + A_PL_CAUSE);
/* Power sequencing is a work-around for Intel's XPAKs. */
static void power_sequence_xpak(adapter_t* adapter)
{
- u32 mod_detect;
- u32 gpo;
+ u32 mod_detect;
+ u32 gpo;
- /* Check for XPAK */
- t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
+ /* Check for XPAK */
+ t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
if (!(ELMER0_GP_BIT5 & mod_detect)) {
/* XPAK is present */
t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
case CHBT_BOARD_N210:
case CHBT_BOARD_CHT210:
case CHBT_BOARD_COUGAR:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
break;
case CHBT_BOARD_CHT110:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
- /* TBD XXX Might not need. This fixes a problem
- * described in the Intel SR XPAK errata.
- */
- power_sequence_xpak(adapter);
+ /* TBD XXX Might not need. This fixes a problem
+ * described in the Intel SR XPAK errata.
+ */
+ power_sequence_xpak(adapter);
break;
#ifdef CONFIG_CHELSIO_T1_1G
- case CHBT_BOARD_CHT204E:
- /* add config space write here */
+ case CHBT_BOARD_CHT204E:
+ /* add config space write here */
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204V:
case CHBT_BOARD_CHN204:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
- break;
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
+ break;
case CHBT_BOARD_CHT101:
case CHBT_BOARD_7500:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
break;
#endif
}
goto out_err;
err = 0;
- out_err:
+out_err:
return err;
}
if (adapter->espi)
t1_espi_destroy(adapter->espi);
#ifdef CONFIG_CHELSIO_T1_COUGAR
- if (adapter->cspi)
+ if (adapter->cspi)
t1_cspi_destroy(adapter->cspi);
#endif
}
CH_ERR("%s: CSPI initialization failed\n",
adapter->name);
goto error;
- }
+ }
#endif
/*
projects / linux-2.6 / blobdiff