*
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
static int au1000_set_config(struct net_device *dev, struct ifmap *map);
static void set_rx_mode(struct net_device *);
static struct net_device_stats *au1000_get_stats(struct net_device *);
-static inline void update_tx_stats(struct net_device *, u32, u32);
-static inline void update_rx_stats(struct net_device *, u32);
static void au1000_timer(unsigned long);
static int au1000_ioctl(struct net_device *, struct ifreq *, int);
static int mdio_read(struct net_device *, int, int);
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
SUPPORTED_Autoneg
-static char *phy_link[] =
-{ "unknown",
- "10Base2", "10BaseT",
- "AUI",
- "100BaseT", "100BaseTX", "100BaseFX"
-};
-
int bcm_5201_init(struct net_device *dev, int phy_addr)
{
s16 data;
{"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
{"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
{"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
+ {"NS DP83847 PHY", 0x2000, 0x5c30, &bcm_5201_ops ,0},
{"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0},
{"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0},
{"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
#endif
if (aup->mii->chip_info == NULL) {
- printk(KERN_ERR "%s: Au1x No MII transceivers found!\n",
+ printk(KERN_ERR "%s: Au1x No known MII transceivers found!\n",
dev->name);
return -1;
}
printk(KERN_ERR "%s: out of memory\n", dev->name);
goto err_out;
}
+ aup->mii->next = NULL;
+ aup->mii->chip_info = NULL;
+ aup->mii->status = 0;
aup->mii->mii_control_reg = 0;
aup->mii->mii_data_reg = 0;
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
reset_mac(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (i = 0; i < NUM_RX_DMA; i++) {
if (aup->rx_db_inuse[i])
ReleaseDB(aup, aup->rx_db_inuse[i]);
if (dev) {
aup = (struct au1000_private *) dev->priv;
unregister_netdev(dev);
- if (aup->mii)
- kfree(aup->mii);
+ kfree(aup->mii);
for (j = 0; j < NUM_RX_DMA; j++) {
if (aup->rx_db_inuse[j])
ReleaseDB(aup, aup->rx_db_inuse[j]);
}
}
-
-static inline void
-update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
+static void update_tx_stats(struct net_device *dev, u32 status)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
struct net_device_stats *ps = &aup->stats;
- ps->tx_packets++;
- ps->tx_bytes += pkt_len;
-
if (status & TX_FRAME_ABORTED) {
if (dev->if_port == IF_PORT_100BASEFX) {
if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
ptxd = aup->tx_dma_ring[aup->tx_tail];
while (ptxd->buff_stat & TX_T_DONE) {
- update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
+ update_tx_stats(dev, ptxd->status);
ptxd->buff_stat &= ~TX_T_DONE;
ptxd->len = 0;
au_sync();
static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
+ struct net_device_stats *ps = &aup->stats;
volatile tx_dma_t *ptxd;
u32 buff_stat;
db_dest_t *pDB;
return 1;
}
else if (buff_stat & TX_T_DONE) {
- update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
+ update_tx_stats(dev, ptxd->status);
ptxd->len = 0;
}
else
ptxd->len = skb->len;
+ ps->tx_packets++;
+ ps->tx_bytes += ptxd->len;
+
ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
au_sync();
dev_kfree_skb(skb);
return 0;
}
-
static inline void update_rx_stats(struct net_device *dev, u32 status)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;