Merge branch 'origin'

[linux-2.6] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 171999e67eecbafaf3da223df8736a4077b95c71..aa633fa95e648e5872fa00bf85ba8d6a355973b5 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -4,9 +4,10 @@
 #
 
 menu "Network device support"
+       depends on NET
 
 config NETDEVICES
-       depends on NET
+       default y if UML
        bool "Network device support"
        ---help---
          You can say N here if you don't intend to connect your Linux box to
@@ -23,9 +24,6 @@ config NETDEVICES
 
          If unsure, say Y.
 
-# All the following symbols are dependent on NETDEVICES - do not repeat
-# that for each of the symbols.
-if NETDEVICES
 
 config IFB
        tristate "Intermediate Functional Block support"
@@ -1089,7 +1087,8 @@ config NE2000
          without a specific driver are compatible with NE2000.
 
          If you have a PCI NE2000 card however, say N here and Y to "PCI
-         NE2000 support", above. If you have a NE2000 card and are running on
+         NE2000 and clone support" under "EISA, VLB, PCI and on board
+         controllers" below. If you have a NE2000 card and are running on
          an MCA system (a bus system used on some IBM PS/2 computers and
          laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
          below.
@@ -1914,6 +1913,15 @@ config E1000_NAPI
 
          If in doubt, say N.
 
+config E1000_DISABLE_PACKET_SPLIT
+       bool "Disable Packet Split for PCI express adapters"
+       depends on E1000
+       help
+         Say Y here if you want to use the legacy receive path for PCI express
+         hadware.
+
+         If in doubt, say N.
+
 source "drivers/net/ixp2000/Kconfig"
 
 config MYRI_SBUS
@@ -2013,8 +2021,8 @@ config SIS190
          will be called sis190.  This is recommended.
 
 config SKGE
-       tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
-       depends on PCI && EXPERIMENTAL
+       tristate "New SysKonnect GigaEthernet support"
+       depends on PCI
        select CRC32
        ---help---
          This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
@@ -2024,13 +2032,28 @@ config SKGE
          It does not support the link failover and network management 
          features that "portable" vendor supplied sk98lin driver does.
 
+         This driver supports adapters based on the original Yukon chipset:
+         Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
+         Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872.
+
+         It does not support the newer Yukon2 chipset: a separate driver,
+         sky2, is provided for Yukon2-based adapters.
+
+         To compile this driver as a module, choose M here: the module
+         will be called skge.  This is recommended.
 
 config SKY2
        tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
        depends on PCI && EXPERIMENTAL
        select CRC32
        ---help---
-         This driver support the Marvell Yukon 2 Gigabit Ethernet adapter.
+         This driver supports Gigabit Ethernet adapters based on the the
+         Marvell Yukon 2 chipset:
+         Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
+         88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
+
+         This driver does not support the original Yukon chipset: a seperate
+         driver, skge, is provided for Yukon-based adapters.
 
          To compile this driver as a module, choose M here: the module
          will be called sky2.  This is recommended.
@@ -2040,8 +2063,15 @@ config SK98LIN
        depends on PCI
        ---help---
          Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-         compliant Gigabit Ethernet Adapter. The following adapters are supported
-         by this driver:
+         compliant Gigabit Ethernet Adapter.
+
+         This driver supports the original Yukon chipset. A cleaner driver is 
+         also available (skge) which seems to work better than this one.
+
+         This driver does not support the newer Yukon2 chipset. A seperate
+         driver, sky2, is provided to support Yukon2-based adapters.
+
+         The following adapters are supported by this driver:
            - 3Com 3C940 Gigabit LOM Ethernet Adapter
            - 3Com 3C941 Gigabit LOM Ethernet Adapter
            - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
@@ -2053,7 +2083,6 @@ config SK98LIN
            - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
            - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
            - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
-           - DGE-530T Gigabit Ethernet Adapter
            - EG1032 v2 Instant Gigabit Network Adapter
            - EG1064 v2 Instant Gigabit Network Adapter
            - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
@@ -2676,10 +2705,6 @@ config SHAPER
          Class-Based Queueing (CBQ) scheduling support which you get if you
          say Y to "QoS and/or fair queueing" above.
 
-         To set up and configure shaper devices, you need the shapecfg
-         program, available from <ftp://shadow.cabi.net/pub/Linux/> in the
-         shaper package.
-
          To compile this driver as a module, choose M here: the module
          will be called shaper.  If unsure, say N.
 
@@ -2690,8 +2715,6 @@ config NETCONSOLE
        If you want to log kernel messages over the network, enable this.
        See <file:Documentation/networking/netconsole.txt> for details.
 
-endif #NETDEVICES
-
 config NETPOLL
        def_bool NETCONSOLE