[NET]: add a top-level Networking menu to *config

[linux-2.6] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 959f8ae6e0cf6930608189397d6281058e1b51f5..9a07ff7a7777dc6edabca5079a7d120591ab6a13 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,6 +3,8 @@
 # Network device configuration
 #
 
+menu "Network device support"
+
 config NETDEVICES
        depends on NET
        bool "Network device support"
@@ -824,6 +826,18 @@ config SMC9194
          <file:Documentation/networking/net-modules.txt>. The module
          will be called smc9194.
 
+config DM9000
+       tristate "DM9000 support"
+       depends on ARM && NET_ETHERNET
+       select CRC32
+       select MII
+       ---help---
+         Support for DM9000 chipset.
+
+         To compile this driver as a module, choose M here and read
+         <file:Documentation/networking/net-modules.txt>.  The module will be
+         called dm9000.
+
 config NET_VENDOR_RACAL
        bool "Racal-Interlan (Micom) NI cards"
        depends on NET_ETHERNET && ISA
@@ -989,21 +1003,6 @@ config EEXPRESS_PRO
          <file:Documentation/networking/net-modules.txt>. The module
          will be called eepro.
 
-config FMV18X
-       tristate "FMV-181/182/183/184 support (OBSOLETE)"
-       depends on NET_ISA && OBSOLETE
-       ---help---
-         If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
-         say Y and read the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         If you use an FMV-183 or FMV-184 and it is not working, you may need
-         to disable Plug & Play mode of the card.
-
-         To compile this driver as a module, choose M here and read
-         <file:Documentation/networking/net-modules.txt>. The module
-         will be called fmv18x.
-
 config HPLAN_PLUS
        tristate "HP PCLAN+ (27247B and 27252A) support"
        depends on NET_ISA
@@ -1092,14 +1091,6 @@ config SEEQ8005
          <file:Documentation/networking/net-modules.txt>. The module
          will be called seeq8005.
 
-config SK_G16
-       tristate "SK_G16 support (OBSOLETE)"
-       depends on NET_ISA && OBSOLETE
-       help
-         If you have a network (Ethernet) card of this type, say Y and read
-         the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
 config SKMC
        tristate "SKnet MCA support"
        depends on NET_ETHERNET && MCA && BROKEN
@@ -1331,7 +1322,7 @@ config FORCEDETH
 
 config CS89x0
        tristate "CS89x0 support"
-       depends on NET_PCI && (ISA || ARCH_IXDP2X01)
+       depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
        ---help---
          Support for CS89x0 chipset based Ethernet cards. If you have a
          network (Ethernet) card of this type, say Y and read the
@@ -1499,14 +1490,14 @@ config 8139CP
          will be called 8139cp.  This is recommended.
 
 config 8139TOO
-       tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
+       tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
        depends on NET_PCI && PCI
        select CRC32
        select MII
        ---help---
          This is a driver for the Fast Ethernet PCI network cards based on
-         the RTL8139 chips. If you have one of those, say Y and read
-         the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+         the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+         read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
 
          To compile this driver as a module, choose M here: the module
          will be called 8139too.  This is recommended.
@@ -1555,6 +1546,7 @@ config SIS900
        tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
        depends on NET_PCI && PCI
        select CRC32
+       select MII
        ---help---
          This is a driver for the Fast Ethernet PCI network cards based on
          the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
@@ -2043,6 +2035,15 @@ config TIGON3
          To compile this driver as a module, choose M here: the module
          will be called tg3.  This is recommended.
 
+config BNX2
+       tristate "Broadcom NetXtremeII support"
+       depends on PCI
+       help
+         This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called bnx2.  This is recommended.
+
 config GIANFAR
        tristate "Gianfar Ethernet"
        depends on 85xx || 83xx
@@ -2548,3 +2549,4 @@ config NETCONSOLE
        If you want to log kernel messages over the network, enable this.
        See <file:Documentation/networking/netconsole.txt> for details.
 
+endmenu