# Network device configuration
#
+menu "Network device support"
+
config NETDEVICES
depends on NET
bool "Network device support"
<file:Documentation/networking/net-modules.txt>. The module
will be called smc9194.
+config DM9000
+ tristate "DM9000 support"
+ depends on ARM && NET_ETHERNET
+ select CRC32
+ select MII
+ ---help---
+ Support for DM9000 chipset.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/networking/net-modules.txt>. The module will be
+ called dm9000.
+
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET && ISA
<file:Documentation/networking/net-modules.txt>. The module
will be called eepro.
-config FMV18X
- tristate "FMV-181/182/183/184 support (OBSOLETE)"
- depends on NET_ISA && OBSOLETE
- ---help---
- If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card,
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- If you use an FMV-183 or FMV-184 and it is not working, you may need
- to disable Plug & Play mode of the card.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called fmv18x.
-
config HPLAN_PLUS
tristate "HP PCLAN+ (27247B and 27252A) support"
depends on NET_ISA
<file:Documentation/networking/net-modules.txt>. The module
will be called seeq8005.
-config SK_G16
- tristate "SK_G16 support (OBSOLETE)"
- depends on NET_ISA && OBSOLETE
- help
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config SKMC
tristate "SKnet MCA support"
depends on NET_ETHERNET && MCA && BROKEN
config CS89x0
tristate "CS89x0 support"
- depends on NET_PCI && (ISA || ARCH_IXDP2X01)
+ depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the
will be called 8139cp. This is recommended.
config 8139TOO
- tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support"
+ tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
- the RTL8139 chips. If you have one of those, say Y and read
- the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
+ the RTL 8129/8130/8139 chips. If you have one of those, say Y and
+ read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called 8139too. This is recommended.
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on NET_PCI && PCI
select CRC32
+ select MII
---help---
This is a driver for the Fast Ethernet PCI network cards based on
the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
If in doubt, say Y.
+config SKGE
+ tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
+ and related Gigabit Ethernet adapters. It is a new smaller driver
+ driver with better performance and more complete ethtool support.
+
+ It does not support the link failover and network management
+ features that "portable" vendor supplied sk98lin driver does.
+
config SK98LIN
tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support"
depends on PCI
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
+config BNX2
+ tristate "Broadcom NetXtremeII support"
+ depends on PCI
+ help
+ This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bnx2. This is recommended.
+
config GIANFAR
tristate "Gianfar Ethernet"
depends on 85xx || 83xx
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
+endmenu