#define DRV_RELDATE "Mar 22, 2004"
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#ifdef CONFIG_NET_POLL_CONTROLLER
static void cp_poll_controller(struct net_device *dev);
#endif
+static int cp_get_eeprom_len(struct net_device *dev);
+static int cp_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data);
+static int cp_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data);
static struct pci_device_id cp_pci_tbl[] = {
{ PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139,
entry = cp->tx_head;
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
if (dev->features & NETIF_F_TSO)
- mss = skb_shinfo(skb)->tso_size;
+ mss = skb_shinfo(skb)->gso_size;
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
cp_init_hw(cp);
- rc = request_irq(dev->irq, cp_interrupt, SA_SHIRQ, dev->name, dev);
+ rc = request_irq(dev->irq, cp_interrupt, IRQF_SHARED, dev->name, dev);
if (rc)
goto err_out_hw;
.get_strings = cp_get_strings,
.get_ethtool_stats = cp_get_ethtool_stats,
.get_perm_addr = ethtool_op_get_perm_addr,
+ .get_eeprom_len = cp_get_eeprom_len,
+ .get_eeprom = cp_get_eeprom,
+ .set_eeprom = cp_set_eeprom,
};
static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
#define eeprom_delay() readl(ee_addr)
/* The EEPROM commands include the alway-set leading bit. */
+#define EE_EXTEND_CMD (4)
#define EE_WRITE_CMD (5)
#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
-static int read_eeprom (void __iomem *ioaddr, int location, int addr_len)
-{
- int i;
- unsigned retval = 0;
- void __iomem *ee_addr = ioaddr + Cfg9346;
- int read_cmd = location | (EE_READ_CMD << addr_len);
+#define EE_EWDS_ADDR (0)
+#define EE_WRAL_ADDR (1)
+#define EE_ERAL_ADDR (2)
+#define EE_EWEN_ADDR (3)
+
+#define CP_EEPROM_MAGIC PCI_DEVICE_ID_REALTEK_8139
+static void eeprom_cmd_start(void __iomem *ee_addr)
+{
writeb (EE_ENB & ~EE_CS, ee_addr);
writeb (EE_ENB, ee_addr);
eeprom_delay ();
+}
- /* Shift the read command bits out. */
- for (i = 4 + addr_len; i >= 0; i--) {
- int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)
+{
+ int i;
+
+ /* Shift the command bits out. */
+ for (i = cmd_len - 1; i >= 0; i--) {
+ int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0;
writeb (EE_ENB | dataval, ee_addr);
eeprom_delay ();
writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
}
writeb (EE_ENB, ee_addr);
eeprom_delay ();
+}
+
+static void eeprom_cmd_end(void __iomem *ee_addr)
+{
+ writeb (~EE_CS, ee_addr);
+ eeprom_delay ();
+}
+
+static void eeprom_extend_cmd(void __iomem *ee_addr, int extend_cmd,
+ int addr_len)
+{
+ int cmd = (EE_EXTEND_CMD << addr_len) | (extend_cmd << (addr_len - 2));
+
+ eeprom_cmd_start(ee_addr);
+ eeprom_cmd(ee_addr, cmd, 3 + addr_len);
+ eeprom_cmd_end(ee_addr);
+}
+
+static u16 read_eeprom (void __iomem *ioaddr, int location, int addr_len)
+{
+ int i;
+ u16 retval = 0;
+ void __iomem *ee_addr = ioaddr + Cfg9346;
+ int read_cmd = location | (EE_READ_CMD << addr_len);
+
+ eeprom_cmd_start(ee_addr);
+ eeprom_cmd(ee_addr, read_cmd, 3 + addr_len);
for (i = 16; i > 0; i--) {
writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
eeprom_delay ();
}
- /* Terminate the EEPROM access. */
- writeb (~EE_CS, ee_addr);
- eeprom_delay ();
+ eeprom_cmd_end(ee_addr);
return retval;
}
+static void write_eeprom(void __iomem *ioaddr, int location, u16 val,
+ int addr_len)
+{
+ int i;
+ void __iomem *ee_addr = ioaddr + Cfg9346;
+ int write_cmd = location | (EE_WRITE_CMD << addr_len);
+
+ eeprom_extend_cmd(ee_addr, EE_EWEN_ADDR, addr_len);
+
+ eeprom_cmd_start(ee_addr);
+ eeprom_cmd(ee_addr, write_cmd, 3 + addr_len);
+ eeprom_cmd(ee_addr, val, 16);
+ eeprom_cmd_end(ee_addr);
+
+ eeprom_cmd_start(ee_addr);
+ for (i = 0; i < 20000; i++)
+ if (readb(ee_addr) & EE_DATA_READ)
+ break;
+ eeprom_cmd_end(ee_addr);
+
+ eeprom_extend_cmd(ee_addr, EE_EWDS_ADDR, addr_len);
+}
+
+static int cp_get_eeprom_len(struct net_device *dev)
+{
+ struct cp_private *cp = netdev_priv(dev);
+ int size;
+
+ spin_lock_irq(&cp->lock);
+ size = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 256 : 128;
+ spin_unlock_irq(&cp->lock);
+
+ return size;
+}
+
+static int cp_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct cp_private *cp = netdev_priv(dev);
+ unsigned int addr_len;
+ u16 val;
+ u32 offset = eeprom->offset >> 1;
+ u32 len = eeprom->len;
+ u32 i = 0;
+
+ eeprom->magic = CP_EEPROM_MAGIC;
+
+ spin_lock_irq(&cp->lock);
+
+ addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
+
+ if (eeprom->offset & 1) {
+ val = read_eeprom(cp->regs, offset, addr_len);
+ data[i++] = (u8)(val >> 8);
+ offset++;
+ }
+
+ while (i < len - 1) {
+ val = read_eeprom(cp->regs, offset, addr_len);
+ data[i++] = (u8)val;
+ data[i++] = (u8)(val >> 8);
+ offset++;
+ }
+
+ if (i < len) {
+ val = read_eeprom(cp->regs, offset, addr_len);
+ data[i] = (u8)val;
+ }
+
+ spin_unlock_irq(&cp->lock);
+ return 0;
+}
+
+static int cp_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct cp_private *cp = netdev_priv(dev);
+ unsigned int addr_len;
+ u16 val;
+ u32 offset = eeprom->offset >> 1;
+ u32 len = eeprom->len;
+ u32 i = 0;
+
+ if (eeprom->magic != CP_EEPROM_MAGIC)
+ return -EINVAL;
+
+ spin_lock_irq(&cp->lock);
+
+ addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
+
+ if (eeprom->offset & 1) {
+ val = read_eeprom(cp->regs, offset, addr_len) & 0xff;
+ val |= (u16)data[i++] << 8;
+ write_eeprom(cp->regs, offset, val, addr_len);
+ offset++;
+ }
+
+ while (i < len - 1) {
+ val = (u16)data[i++];
+ val |= (u16)data[i++] << 8;
+ write_eeprom(cp->regs, offset, val, addr_len);
+ offset++;
+ }
+
+ if (i < len) {
+ val = read_eeprom(cp->regs, offset, addr_len) & 0xff00;
+ val |= (u16)data[i];
+ write_eeprom(cp->regs, offset, val, addr_len);
+ }
+
+ spin_unlock_irq(&cp->lock);
+ return 0;
+}
+
/* Put the board into D3cold state and wait for WakeUp signal */
static void cp_set_d3_state (struct cp_private *cp)
{
struct cp_private *cp;
int rc;
void __iomem *regs;
- long pciaddr;
+ resource_size_t pciaddr;
unsigned int addr_len, i, pci_using_dac;
u8 pci_rev;
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
- printk(KERN_ERR PFX "pci dev %s (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
- pci_name(pdev), pdev->vendor, pdev->device, pci_rev);
- printk(KERN_ERR PFX "Try the \"8139too\" driver instead.\n");
+ dev_err(&pdev->dev,
+ "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
+ pdev->vendor, pdev->device, pci_rev);
+ dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
return -ENODEV;
}
pciaddr = pci_resource_start(pdev, 1);
if (!pciaddr) {
rc = -EIO;
- printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "no MMIO resource\n");
goto err_out_res;
}
if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) {
rc = -EIO;
- printk(KERN_ERR PFX "MMIO resource (%lx) too small on pci dev %s\n",
- pci_resource_len(pdev, 1), pci_name(pdev));
+ dev_err(&pdev->dev, "MMIO resource (%llx) too small\n",
+ (unsigned long long)pci_resource_len(pdev, 1));
goto err_out_res;
}
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting.\n");
goto err_out_res;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR PFX "No usable consistent DMA configuration, "
- "aborting.\n");
+ dev_err(&pdev->dev,
+ "No usable consistent DMA configuration, "
+ "aborting.\n");
goto err_out_res;
}
}
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
- printk(KERN_ERR PFX "Cannot map PCI MMIO (%lx@%lx) on pci dev %s\n",
- pci_resource_len(pdev, 1), pciaddr, pci_name(pdev));
+ dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
+ (unsigned long long)pci_resource_len(pdev, 1),
+ (unsigned long long)pciaddr);
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
/* enable busmastering and memory-write-invalidate */
pci_set_master(pdev);
- if (cp->wol_enabled) cp_set_d3_state (cp);
+ if (cp->wol_enabled)
+ cp_set_d3_state (cp);
return 0;
BUG_ON(!dev);
unregister_netdev(dev);
iounmap(cp->regs);
- if (cp->wol_enabled) pci_set_power_state (pdev, PCI_D0);
+ if (cp->wol_enabled)
+ pci_set_power_state (pdev, PCI_D0);
pci_release_regions(pdev);
pci_clear_mwi(pdev);
pci_disable_device(pdev);