* Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
+ * Credits:
+ * Adrian Hunter <ext-adrian.hunter@nokia.com>:
+ * auto-placement support, read-while load support, various fixes
+ * Copyright (C) Nokia Corporation, 2007
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
default:
block = (int) (addr >> this->erase_shift);
page = (int) (addr >> this->page_shift);
+
+ if (ONENAND_IS_2PLANE(this)) {
+ /* Make the even block number */
+ block &= ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page >>= 1;
+ }
page &= this->page_mask;
break;
}
value = onenand_bufferram_address(this, block);
this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
- /* Switch to the next data buffer */
- ONENAND_SET_NEXT_BUFFERRAM(this);
+ if (ONENAND_IS_2PLANE(this))
+ /* It is always BufferRAM0 */
+ ONENAND_SET_BUFFERRAM0(this);
+ else
+ /* Switch to the next data buffer */
+ ONENAND_SET_NEXT_BUFFERRAM(this);
return 0;
}
break;
default:
+ if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
+ cmd = ONENAND_CMD_2X_PROG;
dataram = ONENAND_CURRENT_BUFFERRAM(this);
break;
}
struct onenand_chip *this = mtd->priv;
if (ONENAND_CURRENT_BUFFERRAM(this)) {
+ /* Note: the 'this->writesize' is a real page size */
if (area == ONENAND_DATARAM)
- return mtd->writesize;
+ return this->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
return 0;
}
+/**
+ * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
+ * @param mtd MTD data structure
+ * @param addr address to check
+ * @return blockpage address
+ *
+ * Get blockpage address at 2x program mode
+ */
+static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
+{
+ struct onenand_chip *this = mtd->priv;
+ int blockpage, block, page;
+
+ /* Calculate the even block number */
+ block = (int) (addr >> this->erase_shift) & ~1;
+ /* Is it the odd plane? */
+ if (addr & this->writesize)
+ block++;
+ page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
+ blockpage = (block << 7) | page;
+
+ return blockpage;
+}
+
/**
* onenand_check_bufferram - [GENERIC] Check BufferRAM information
* @param mtd MTD data structure
int blockpage, found = 0;
unsigned int i;
- blockpage = (int) (addr >> this->page_shift);
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
/* Is there valid data? */
i = ONENAND_CURRENT_BUFFERRAM(this);
int blockpage;
unsigned int i;
- blockpage = (int) (addr >> this->page_shift);
+ if (ONENAND_IS_2PLANE(this))
+ blockpage = onenand_get_2x_blockpage(mtd, addr);
+ else
+ blockpage = (int) (addr >> this->page_shift);
/* Invalidate another BufferRAM */
i = ONENAND_NEXT_BUFFERRAM(this);
this->bufferram[i].blockpage = -1;
}
+/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr start address to invalidate
+ * @param len length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+ unsigned int len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+ loff_t end_addr = addr + len;
+
+ /* Invalidate BufferRAM */
+ for (i = 0; i < MAX_BUFFERRAM; i++) {
+ loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
+ if (buf_addr >= addr && buf_addr < end_addr)
+ this->bufferram[i].blockpage = -1;
+ }
+}
+
/**
* onenand_get_device - [GENERIC] Get chip for selected access
* @param mtd MTD device structure
int read = 0, column;
int thislen;
int ret = 0, boundary = 0;
+ int writesize = this->writesize;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
/* Do first load to bufferRAM */
if (read < len) {
if (!onenand_check_bufferram(mtd, from)) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
ret = this->wait(mtd, FL_READING);
onenand_update_bufferram(mtd, from, !ret);
}
}
- thislen = min_t(int, mtd->writesize, len - read);
- column = from & (mtd->writesize - 1);
- if (column + thislen > mtd->writesize)
- thislen = mtd->writesize - column;
+ thislen = min_t(int, writesize, len - read);
+ column = from & (writesize - 1);
+ if (column + thislen > writesize)
+ thislen = writesize - column;
while (!ret) {
/* If there is more to load then start next load */
from += thislen;
if (read + thislen < len) {
- this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, from, writesize);
/*
* Chip boundary handling in DDP
* Now we issued chip 1 read and pointed chip 1
this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
ONENAND_SET_NEXT_BUFFERRAM(this);
buf += thislen;
- thislen = min_t(int, mtd->writesize, len - read);
+ thislen = min_t(int, writesize, len - read);
column = 0;
cond_resched();
/* Now wait for load */
int readcol = column;
int readend = column + thislen;
int lastgap = 0;
- uint8_t *oob_buf = this->page_buf + mtd->writesize;
+ unsigned int i;
+ uint8_t *oob_buf = this->oob_buf;
- for (free = this->ecclayout->oobfree; free->length; ++free) {
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
if (readcol >= lastgap)
readcol += free->offset - lastgap;
if (readend >= lastgap)
lastgap = free->offset + free->length;
}
this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
- for (free = this->ecclayout->oobfree; free->length; ++free) {
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < readend && free_end > readcol) {
int st = max_t(int,free->offset,readcol);
int n = ed - st;
memcpy(buf, oob_buf + st, n);
buf += n;
- }
+ } else if (column == 0)
+ break;
}
return 0;
}
/**
* onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @param mtd: MTD device structure
+ * @param from: offset to read from
+ * @param ops: oob operation description structure
*/
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
* onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
* @param mtd MTD device structure
* @param from offset to read from
- * @param @ops oob operation description structure
+ * @param ops oob operation description structure
*
* OneNAND read out-of-band data from the spare area for bbt scan
*/
size_t len = ops->ooblen;
u_char *buf = ops->oobbuf;
- DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, len);
+ DEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len);
/* Initialize return value */
ops->oobretlen = 0;
/* Read more? */
if (read < len) {
/* Update Page size */
- from += mtd->writesize;
+ from += this->writesize;
column = 0;
}
}
static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
- char *readp = this->page_buf + mtd->writesize;
+ char oobbuf[64];
int status, i;
this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
- for(i = 0; i < mtd->oobsize; i++)
- if (buf[i] != 0xFF && buf[i] != readp[i])
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+ for (i = 0; i < mtd->oobsize; i++)
+ if (buf[i] != 0xFF && buf[i] != oobbuf[i])
return -EBADMSG;
return 0;
int thislen, column;
while (len != 0) {
- thislen = min_t(int, mtd->writesize, len);
- column = addr & (mtd->writesize - 1);
- if (column + thislen > mtd->writesize)
- thislen = mtd->writesize - column;
+ thislen = min_t(int, this->writesize, len);
+ column = addr & (this->writesize - 1);
+ if (column + thislen > this->writesize)
+ thislen = this->writesize - column;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
+ this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
onenand_update_bufferram(mtd, addr, 0);
/* In partial page write we don't update bufferram */
onenand_update_bufferram(mtd, to, !ret && !subpage);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
+ }
if (ret) {
printk(KERN_ERR "onenand_write: write filaed %d\n", ret);
int writecol = column;
int writeend = column + thislen;
int lastgap = 0;
+ unsigned int i;
- for (free = this->ecclayout->oobfree; free->length; ++free) {
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
if (writecol >= lastgap)
writecol += free->offset - lastgap;
if (writeend >= lastgap)
writeend += free->offset - lastgap;
lastgap = free->offset + free->length;
}
- for (free = this->ecclayout->oobfree; free->length; ++free) {
+ free = this->ecclayout->oobfree;
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
int free_end = free->offset + free->length;
if (free->offset < writeend && free_end > writecol) {
int st = max_t(int,free->offset,writecol);
int n = ed - st;
memcpy(oob_buf + st, buf, n);
buf += n;
- }
+ } else if (column == 0)
+ break;
}
return 0;
}
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
int written = 0;
+ u_char *oobbuf;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
}
/* For compatibility with NAND: Do not allow write past end of page */
- if (column + len > oobsize) {
+ if (unlikely(column + len > oobsize)) {
printk(KERN_ERR "onenand_write_oob: "
"Attempt to write past end of page\n");
return -EINVAL;
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
+ oobbuf = this->oob_buf;
+
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
/* We send data to spare ram with oobsize
* to prevent byte access */
- memset(this->page_buf, 0xff, mtd->oobsize);
+ memset(oobbuf, 0xff, mtd->oobsize);
if (mode == MTD_OOB_AUTO)
- onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+ onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
- memcpy(this->page_buf + column, buf, thislen);
- this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
+ memcpy(oobbuf + column, buf, thislen);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
onenand_update_bufferram(mtd, to, 0);
+ if (ONENAND_IS_2PLANE(this)) {
+ ONENAND_SET_BUFFERRAM1(this);
+ onenand_update_bufferram(mtd, to + this->writesize, 0);
+ }
ret = this->wait(mtd, FL_WRITING);
if (ret) {
break;
}
- ret = onenand_verify_oob(mtd, this->page_buf, to);
+ ret = onenand_verify_oob(mtd, oobbuf, to);
if (ret) {
printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
break;
/**
* onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @param mtd: MTD device structure
+ * @param to: offset to write
+ * @param ops: oob operation description structure
*/
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+ onenand_invalidate_bufferram(mtd, addr, block_size);
+
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to lock or unlock
+ * @param cmd lock or unlock command
*
* Lock or unlock one or more blocks
*/
*
* Check and set OneNAND features
* - lock scheme
+ * - two plane
*/
static void onenand_check_features(struct mtd_info *mtd)
{
process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
/* Lock scheme */
- if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
+ switch (density) {
+ case ONENAND_DEVICE_DENSITY_4Gb:
+ this->options |= ONENAND_HAS_2PLANE;
+
+ case ONENAND_DEVICE_DENSITY_2Gb:
+ /* 2Gb DDP don't have 2 plane */
+ if (!ONENAND_IS_DDP(this))
+ this->options |= ONENAND_HAS_2PLANE;
+ this->options |= ONENAND_HAS_UNLOCK_ALL;
+
+ case ONENAND_DEVICE_DENSITY_1Gb:
/* A-Die has all block unlock */
- if (process) {
- printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (process)
this->options |= ONENAND_HAS_UNLOCK_ALL;
- }
- } else {
- /* Some OneNAND has continues lock scheme */
- if (!process) {
- printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
+ break;
+
+ default:
+ /* Some OneNAND has continuous lock scheme */
+ if (!process)
this->options |= ONENAND_HAS_CONT_LOCK;
- }
+ break;
}
+
+ if (this->options & ONENAND_HAS_CONT_LOCK)
+ printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
+ if (this->options & ONENAND_HAS_UNLOCK_ALL)
+ printk(KERN_DEBUG "Chip support all block unlock\n");
+ if (this->options & ONENAND_HAS_2PLANE)
+ printk(KERN_DEBUG "Chip has 2 plane\n");
}
/**
- * onenand_print_device_info - Print device ID
+ * onenand_print_device_info - Print device & version ID
* @param device device ID
+ * @param version version ID
*
- * Print device ID
+ * Print device & version ID
*/
static void onenand_print_device_info(int device, int version)
{
* @param mtd MTD device structure
*
* OneNAND detection method:
- * Compare the the values from command with ones from register
+ * Compare the values from command with ones from register
*/
static int onenand_probe(struct mtd_info *mtd)
{
this->erase_shift = ffs(mtd->erasesize) - 1;
this->page_shift = ffs(mtd->writesize) - 1;
this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
+ /* It's real page size */
+ this->writesize = mtd->writesize;
/* REVIST: Multichip handling */
/* Check OneNAND features */
onenand_check_features(mtd);
+ /*
+ * We emulate the 4KiB page and 256KiB erase block size
+ * But oobsize is still 64 bytes.
+ * It is only valid if you turn on 2X program support,
+ * Otherwise it will be ignored by compiler.
+ */
+ if (ONENAND_IS_2PLANE(this)) {
+ mtd->writesize <<= 1;
+ mtd->erasesize <<= 1;
+ }
+
return 0;
}
/* Allocate buffers, if necessary */
if (!this->page_buf) {
- size_t len;
- len = mtd->writesize + mtd->oobsize;
- this->page_buf = kmalloc(len, GFP_KERNEL);
+ this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
if (!this->page_buf) {
printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
return -ENOMEM;
}
this->options |= ONENAND_PAGEBUF_ALLOC;
}
+ if (!this->oob_buf) {
+ this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
+ if (!this->oob_buf) {
+ printk(KERN_ERR "onenand_scan(): Can't allocate oob_buf\n");
+ if (this->options & ONENAND_PAGEBUF_ALLOC) {
+ this->options &= ~ONENAND_PAGEBUF_ALLOC;
+ kfree(this->page_buf);
+ }
+ return -ENOMEM;
+ }
+ this->options |= ONENAND_OOBBUF_ALLOC;
+ }
this->state = FL_READY;
init_waitqueue_head(&this->wq);
* the out of band area
*/
this->ecclayout->oobavail = 0;
- for (i = 0; this->ecclayout->oobfree[i].length; i++)
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
+ this->ecclayout->oobfree[i].length; i++)
this->ecclayout->oobavail +=
this->ecclayout->oobfree[i].length;
+ mtd->oobavail = this->ecclayout->oobavail;
mtd->ecclayout = this->ecclayout;
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->ecctype = MTD_ECC_SW;
mtd->erase = onenand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
kfree(bbm->bbt);
kfree(this->bbm);
}
- /* Buffer allocated by onenand_scan */
+ /* Buffers allocated by onenand_scan */
if (this->options & ONENAND_PAGEBUF_ALLOC)
kfree(this->page_buf);
+ if (this->options & ONENAND_OOBBUF_ALLOC)
+ kfree(this->oob_buf);
}
EXPORT_SYMBOL_GPL(onenand_scan);