static char *weakpages = NULL;
static unsigned int bitflips = 0;
static char *gravepages = NULL;
+static unsigned int rptwear = 0;
+static unsigned int overridesize = 0;
module_param(first_id_byte, uint, 0400);
module_param(second_id_byte, uint, 0400);
module_param(weakpages, charp, 0400);
module_param(bitflips, uint, 0400);
module_param(gravepages, charp, 0400);
+module_param(rptwear, uint, 0400);
+module_param(overridesize, uint, 0400);
-MODULE_PARM_DESC(first_id_byte, "The fist byte returned by NAND Flash 'read ID' command (manufaturer ID)");
+MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID)");
MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command");
MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command");
MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
" separated by commas e.g. 1401:2 means page 1401"
" can be read only twice before failing");
+MODULE_PARM_DESC(rptwear, "Number of erases inbetween reporting wear, if not zero");
+MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
+ "The size is specified in erase blocks and as the exponent of a power of two"
+ " e.g. 5 means a size of 32 erase blocks");
/* The largest possible page size */
#define NS_LARGEST_PAGE_SIZE 2048
do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: " args); } while(0)
#define NS_ERR(args...) \
do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); } while(0)
+#define NS_INFO(args...) \
+ do { printk(KERN_INFO NS_OUTPUT_PREFIX " " args); } while(0)
/* Busy-wait delay macros (microseconds, milliseconds) */
#define NS_UDELAY(us) \
#define STATE_CMD_RESET 0x0000000C /* reset */
#define STATE_CMD_MASK 0x0000000F /* command states mask */
-/* After an addres is input, the simulator goes to one of these states */
+/* After an address is input, the simulator goes to one of these states */
#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */
static LIST_HEAD(grave_pages);
+static unsigned long *erase_block_wear = NULL;
+static unsigned int wear_eb_count = 0;
+static unsigned long total_wear = 0;
+static unsigned int rptwear_cnt = 0;
+
/* MTD structure for NAND controller */
static struct mtd_info *nsmtd;
}
if (ns->options & OPT_SMALLPAGE) {
- if (ns->geom.totsz < (64 << 20)) {
+ if (ns->geom.totsz < (32 << 20)) {
ns->geom.pgaddrbytes = 3;
ns->geom.secaddrbytes = 2;
} else {
list_del(pos);
kfree(list_entry(pos, struct grave_page, list));
}
+ kfree(erase_block_wear);
+}
+
+static int setup_wear_reporting(struct mtd_info *mtd)
+{
+ size_t mem;
+
+ if (!rptwear)
+ return 0;
+ wear_eb_count = mtd->size / mtd->erasesize;
+ mem = wear_eb_count * sizeof(unsigned long);
+ if (mem / sizeof(unsigned long) != wear_eb_count) {
+ NS_ERR("Too many erase blocks for wear reporting\n");
+ return -ENOMEM;
+ }
+ erase_block_wear = kzalloc(mem, GFP_KERNEL);
+ if (!erase_block_wear) {
+ NS_ERR("Too many erase blocks for wear reporting\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void update_wear(unsigned int erase_block_no)
+{
+ unsigned long wmin = -1, wmax = 0, avg;
+ unsigned long deciles[10], decile_max[10], tot = 0;
+ unsigned int i;
+
+ if (!erase_block_wear)
+ return;
+ total_wear += 1;
+ if (total_wear == 0)
+ NS_ERR("Erase counter total overflow\n");
+ erase_block_wear[erase_block_no] += 1;
+ if (erase_block_wear[erase_block_no] == 0)
+ NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
+ rptwear_cnt += 1;
+ if (rptwear_cnt < rptwear)
+ return;
+ rptwear_cnt = 0;
+ /* Calc wear stats */
+ for (i = 0; i < wear_eb_count; ++i) {
+ unsigned long wear = erase_block_wear[i];
+ if (wear < wmin)
+ wmin = wear;
+ if (wear > wmax)
+ wmax = wear;
+ tot += wear;
+ }
+ for (i = 0; i < 9; ++i) {
+ deciles[i] = 0;
+ decile_max[i] = (wmax * (i + 1) + 5) / 10;
+ }
+ deciles[9] = 0;
+ decile_max[9] = wmax;
+ for (i = 0; i < wear_eb_count; ++i) {
+ int d;
+ unsigned long wear = erase_block_wear[i];
+ for (d = 0; d < 10; ++d)
+ if (wear <= decile_max[d]) {
+ deciles[d] += 1;
+ break;
+ }
+ }
+ avg = tot / wear_eb_count;
+ /* Output wear report */
+ NS_INFO("*** Wear Report ***\n");
+ NS_INFO("Total numbers of erases: %lu\n", tot);
+ NS_INFO("Number of erase blocks: %u\n", wear_eb_count);
+ NS_INFO("Average number of erases: %lu\n", avg);
+ NS_INFO("Maximum number of erases: %lu\n", wmax);
+ NS_INFO("Minimum number of erases: %lu\n", wmin);
+ for (i = 0; i < 10; ++i) {
+ unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
+ if (from > decile_max[i])
+ continue;
+ NS_INFO("Number of ebs with erase counts from %lu to %lu : %lu\n",
+ from,
+ decile_max[i],
+ deciles[i]);
+ }
+ NS_INFO("*** End of Wear Report ***\n");
}
/*
mypage = NS_GET_PAGE(ns);
if (mypage->byte == NULL) {
NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
- mypage->byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+ /*
+ * We allocate memory with GFP_NOFS because a flash FS may
+ * utilize this. If it is holding an FS lock, then gets here,
+ * then kmalloc runs writeback which goes to the FS again
+ * and deadlocks. This was seen in practice.
+ */
+ mypage->byte = kmalloc(ns->geom.pgszoob, GFP_NOFS);
if (mypage->byte == NULL) {
NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
return -1;
NS_MDELAY(erase_delay);
+ if (erase_block_wear)
+ update_wear(erase_block_no);
+
if (erase_error(erase_block_no)) {
NS_WARN("simulating erase failure in erase block %u\n", erase_block_no);
return -1;
chip->verify_buf = ns_nand_verify_buf;
chip->read_word = ns_nand_read_word;
chip->ecc.mode = NAND_ECC_SOFT;
+ /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
+ /* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
/*
goto error;
}
+ if (overridesize) {
+ u_int32_t new_size = nsmtd->erasesize << overridesize;
+ if (new_size >> overridesize != nsmtd->erasesize) {
+ NS_ERR("overridesize is too big\n");
+ goto err_exit;
+ }
+ /* N.B. This relies on nand_scan not doing anything with the size before we change it */
+ nsmtd->size = new_size;
+ chip->chipsize = new_size;
+ chip->chip_shift = ffs(new_size) - 1;
+ }
+
+ if ((retval = setup_wear_reporting(nsmtd)) != 0)
+ goto err_exit;
+
if ((retval = init_nandsim(nsmtd)) != 0)
goto err_exit;