[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead

[linux-2.6] / drivers / mtd / devices / Kconfig

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index ff642f8fbee759c2d2c9bc4892a53b67de08a8e9..9c613f06623cd4d1191eafb7e6d4adfb75736037 100644 (file)
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,4 @@
 # drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
 
 menu "Self-contained MTD device drivers"
        depends on MTD!=n
@@ -60,21 +59,29 @@ config MTD_DATAFLASH
          Sometimes DataFlash chips are packaged inside MMC-format
          cards; at this writing, the MMC stack won't handle those.
 
-config MTD_DATAFLASH26
-       tristate "AT91RM9200 DataFlash AT26xxx"
-       depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-       help
-         This enables access to the DataFlash chip (AT26xxx) on an
-         AT91RM9200-based board.
-         If you have such a board and such a DataFlash, say 'Y'.
-
 config MTD_M25P80
-       tristate "Support for M25 SPI Flash"
+       tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
        depends on SPI_MASTER && EXPERIMENTAL
        help
-         This enables access to ST M25P80 and similar SPI flash chips,
-         used for program and data storage.  Set up your spi devices
-         with the right board-specific platform data.
+         This enables access to most modern SPI flash chips, used for
+         program and data storage.   Series supported include Atmel AT26DF,
+         Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
+         are supported as well.  See the driver source for the current list,
+         or to add other chips.
+
+         Note that the original DataFlash chips (AT45 series, not AT26DF),
+         need an entirely different driver.
+
+         Set up your spi devices with the right board-specific platform data,
+         if you want to specify device partitioning or to use a device which
+         doesn't support the JEDEC ID instruction.
+
+config M25PXX_USE_FAST_READ
+       bool "Use FAST_READ OPCode allowing SPI CLK <= 50MHz"
+       depends on MTD_M25P80
+       default y
+       help
+         This option enables FAST_READ access supported by ST M25Pxx.
 
 config MTD_SLRAM
        tristate "Uncached system RAM"