# drivers/mtd/maps/Kconfig
-# $Id: Kconfig,v 1.18 2005/11/07 11:14:24 gleixner Exp $
menu "Self-contained MTD device drivers"
depends on MTD!=n
config MTD_PMC551
tristate "Ramix PMC551 PCI Mezzanine RAM card support"
- depends on MTD && PCI
+ depends on PCI
---help---
This provides a MTD device driver for the Ramix PMC551 RAM PCI card
from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
config MTD_MS02NV
tristate "DEC MS02-NV NVRAM module support"
- depends on MTD && MACH_DECSTATION
+ depends on MACH_DECSTATION
help
This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
backed-up NVRAM module. The module was originally meant as an NFS
accelerator. Say Y here if you have a DECstation 5000/2x0 or a
DECsystem 5900 equipped with such a module.
+ If you want to compile this driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ms02-nv.ko.
+
config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
- depends on MTD && SPI_MASTER && EXPERIMENTAL
+ depends on SPI_MASTER && EXPERIMENTAL
help
This enables access to AT45xxx DataFlash chips, using SPI.
Sometimes DataFlash chips are packaged inside MMC-format
cards; at this writing, the MMC stack won't handle those.
config MTD_M25P80
- tristate "Support for M25 SPI Flash"
- depends on MTD && SPI_MASTER && EXPERIMENTAL
+ tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ This enables access to most modern SPI flash chips, used for
+ program and data storage. Series supported include Atmel AT26DF,
+ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
+ are supported as well. See the driver source for the current list,
+ or to add other chips.
+
+ Note that the original DataFlash chips (AT45 series, not AT26DF),
+ need an entirely different driver.
+
+ Set up your spi devices with the right board-specific platform data,
+ if you want to specify device partitioning or to use a device which
+ doesn't support the JEDEC ID instruction.
+
+config M25PXX_USE_FAST_READ
+ bool "Use FAST_READ OPCode allowing SPI CLK <= 50MHz"
+ depends on MTD_M25P80
+ default y
help
- This enables access to ST M25P80 and similar SPI flash chips,
- used for program and data storage. Set up your spi devices
- with the right board-specific platform data.
+ This option enables FAST_READ access supported by ST M25Pxx.
config MTD_SLRAM
tristate "Uncached system RAM"
- depends on MTD
help
If your CPU cannot cache all of the physical memory in your machine,
you can still use it for storage or swap by using this driver to
config MTD_PHRAM
tristate "Physical system RAM"
- depends on MTD
help
This is a re-implementation of the slram driver above.
config MTD_LART
tristate "28F160xx flash driver for LART"
- depends on SA1100_LART && MTD
+ depends on SA1100_LART
help
This enables the flash driver for LART. Please note that you do
not need any mapping/chip driver for LART. This one does it all
config MTD_MTDRAM
tristate "Test driver using RAM"
- depends on MTD
help
This enables a test MTD device driver which uses vmalloc() to
provide storage. You probably want to say 'N' unless you're
allocating space from Linux's available memory. Otherwise, leave
this set to zero. Most people will want to leave this as zero.
-config MTD_BLKMTD
- tristate "MTD emulation using block device"
- depends on MTD
+config MTD_BLOCK2MTD
+ tristate "MTD using block device"
+ depends on BLOCK
help
This driver allows a block device to appear as an MTD. It would
generally be used in the following cases:
Testing MTD users (eg JFFS2) on large media and media that might
be removed during a write (using the floppy drive).
-config MTD_BLOCK2MTD
- tristate "MTD using block device (rewrite)"
- depends on MTD && EXPERIMENTAL
- help
- This driver is basically the same at MTD_BLKMTD above, but
- experienced some interface changes plus serious speedups. In
- the long term, it should replace MTD_BLKMTD. Right now, you
- shouldn't entrust important data to it yet.
-
comment "Disk-On-Chip Device Drivers"
config MTD_DOC2000
tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
- depends on MTD
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
config MTD_DOC2001
tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
- depends on MTD
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
config MTD_DOC2001PLUS
tristate "M-Systems Disk-On-Chip Millennium Plus"
- depends on MTD
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
config MTD_DOCPROBE
tristate
select MTD_DOCECC
- select OBSOLETE_INTERMODULE
config MTD_DOCECC
tristate