* published by the Free Software Foundation.
*/
- /*
- * Note that PIO transfer is rather crappy atm. The buffer full/empty
- * interrupts aren't reliable so we currently transfer the entire buffer
- * directly. Patches to solve the problem are welcome.
- */
-
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/pci.h>
#include "sdhci.h"
#define DRIVER_NAME "sdhci"
-#define DRIVER_VERSION "0.11"
+#define DRIVER_VERSION "0.12"
#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+static unsigned int debug_nodma = 0;
+static unsigned int debug_forcedma = 0;
+static unsigned int debug_quirks = 0;
+
static const struct pci_device_id pci_ids[] __devinitdata = {
/* handle any SD host controller */
{PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)},
sdhci_reset(host, SDHCI_RESET_ALL);
- intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
+ intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
+ SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
+ SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
+ SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
return host->num_sg;
}
-static void sdhci_transfer_pio(struct sdhci_host *host)
+static void sdhci_read_block_pio(struct sdhci_host *host)
{
+ int blksize, chunk_remain;
+ u32 data;
char *buffer;
- u32 mask;
- int bytes, size;
- unsigned long max_jiffies;
+ int size;
- BUG_ON(!host->data);
+ DBG("PIO reading\n");
- if (host->num_sg == 0)
- return;
-
- bytes = 0;
- if (host->data->flags & MMC_DATA_READ)
- mask = SDHCI_DATA_AVAILABLE;
- else
- mask = SDHCI_SPACE_AVAILABLE;
+ blksize = host->data->blksz;
+ chunk_remain = 0;
+ data = 0;
buffer = sdhci_kmap_sg(host) + host->offset;
- /* Transfer shouldn't take more than 5 s */
- max_jiffies = jiffies + HZ * 5;
+ while (blksize) {
+ if (chunk_remain == 0) {
+ data = readl(host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
+ }
- while (host->size > 0) {
- if (time_after(jiffies, max_jiffies)) {
- printk(KERN_ERR "%s: PIO transfer stalled. "
- "Please report this to "
- BUGMAIL ".\n", mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
- sdhci_kunmap_sg(host);
+ chunk_remain -= size;
+ blksize -= size;
+ host->offset += size;
+ host->remain -= size;
+ host->size -= size;
+ while (size) {
+ *buffer = data & 0xFF;
+ buffer++;
+ data >>= 8;
+ size--;
+ }
- host->data->error = MMC_ERR_FAILED;
- sdhci_finish_data(host);
- return;
+ if (host->remain == 0) {
+ sdhci_kunmap_sg(host);
+ if (sdhci_next_sg(host) == 0) {
+ BUG_ON(blksize != 0);
+ return;
+ }
+ buffer = sdhci_kmap_sg(host);
}
+ }
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask))
- continue;
+ sdhci_kunmap_sg(host);
+}
- size = min(host->size, host->remain);
+static void sdhci_write_block_pio(struct sdhci_host *host)
+{
+ int blksize, chunk_remain;
+ u32 data;
+ char *buffer;
+ int bytes, size;
- if (size >= 4) {
- if (host->data->flags & MMC_DATA_READ)
- *(u32*)buffer = readl(host->ioaddr + SDHCI_BUFFER);
- else
- writel(*(u32*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 4;
- } else if (size >= 2) {
- if (host->data->flags & MMC_DATA_READ)
- *(u16*)buffer = readw(host->ioaddr + SDHCI_BUFFER);
- else
- writew(*(u16*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 2;
- } else {
- if (host->data->flags & MMC_DATA_READ)
- *(u8*)buffer = readb(host->ioaddr + SDHCI_BUFFER);
- else
- writeb(*(u8*)buffer, host->ioaddr + SDHCI_BUFFER);
- size = 1;
- }
+ DBG("PIO writing\n");
+
+ blksize = host->data->blksz;
+ chunk_remain = 4;
+ data = 0;
+
+ bytes = 0;
+ buffer = sdhci_kmap_sg(host) + host->offset;
+
+ while (blksize) {
+ size = min(host->size, host->remain);
+ size = min(size, chunk_remain);
- buffer += size;
+ chunk_remain -= size;
+ blksize -= size;
host->offset += size;
host->remain -= size;
-
- bytes += size;
host->size -= size;
+ while (size) {
+ data >>= 8;
+ data |= (u32)*buffer << 24;
+ buffer++;
+ size--;
+ }
+
+ if (chunk_remain == 0) {
+ writel(data, host->ioaddr + SDHCI_BUFFER);
+ chunk_remain = min(blksize, 4);
+ }
if (host->remain == 0) {
sdhci_kunmap_sg(host);
if (sdhci_next_sg(host) == 0) {
- DBG("PIO transfer: %d bytes\n", bytes);
+ BUG_ON(blksize != 0);
return;
}
buffer = sdhci_kmap_sg(host);
}
sdhci_kunmap_sg(host);
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host)
+{
+ u32 mask;
+
+ BUG_ON(!host->data);
+
+ if (host->size == 0)
+ return;
- DBG("PIO transfer: %d bytes\n", bytes);
+ if (host->data->flags & MMC_DATA_READ)
+ mask = SDHCI_DATA_AVAILABLE;
+ else
+ mask = SDHCI_SPACE_AVAILABLE;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ if (host->data->flags & MMC_DATA_READ)
+ sdhci_read_block_pio(host);
+ else
+ sdhci_write_block_pio(host);
+
+ if (host->size == 0)
+ break;
+
+ BUG_ON(host->num_sg == 0);
+ }
+
+ DBG("PIO transfer complete.\n");
}
static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
DBG("tsac %d ms nsac %d clk\n",
data->timeout_ns / 1000000, data->timeout_clks);
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->max_block);
+ BUG_ON(data->blocks > 65535);
+
/* timeout in us */
target_timeout = data->timeout_ns / 1000 +
data->timeout_clks / host->clock;
host->remain = host->cur_sg->length;
}
- writew(data->blksz, host->ioaddr + SDHCI_BLOCK_SIZE);
+ /* We do not handle DMA boundaries, so set it to max (512 KiB) */
+ writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
+ host->ioaddr + SDHCI_BLOCK_SIZE);
writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
}
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u32 intmask;
u16 blocks;
BUG_ON(!host->data);
if (host->flags & SDHCI_USE_DMA) {
pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
(data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- } else {
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
}
/*
static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
{
int flags;
+ u32 mask;
unsigned long timeout;
WARN_ON(host->cmd);
/* Wait max 10 ms */
timeout = 10;
- while (readl(host->ioaddr + SDHCI_PRESENT_STATE) &
- (SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT)) {
+
+ mask = SDHCI_CMD_INHIBIT;
+ if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
+ mask |= SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (host->mrq->data && (cmd == host->mrq->data->stop))
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
printk(KERN_ERR "%s: Controller never released "
- "inhibit bits. Please report this to "
+ "inhibit bit(s). Please report this to "
BUGMAIL ".\n", mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = MMC_ERR_FAILED;
DBG("Ending cmd (%x)\n", host->cmd->opcode);
- if (host->cmd->data) {
- u32 intmask;
-
+ if (host->cmd->data)
host->data = host->cmd->data;
-
- if (!(host->flags & SDHCI_USE_DMA)) {
- /*
- * Don't enable the interrupts until now to make sure we
- * get stable handling of the FIFO.
- */
- intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-
- intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
- intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
- /*
- * The buffer interrupts are to unreliable so we
- * start the transfer immediatly.
- */
- sdhci_transfer_pio(host);
- }
- } else
+ else
tasklet_schedule(&host->finish_tasklet);
host->cmd = NULL;
if (host->data->error != MMC_ERR_NONE)
sdhci_finish_data(host);
else {
- if (intmask & (SDHCI_INT_BUF_FULL | SDHCI_INT_BUF_EMPTY))
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
sdhci_transfer_pio(host);
if (intmask & SDHCI_INT_DATA_END)
DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
- if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
+ if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+ writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
+ host->ioaddr + SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
+ }
- if (intmask & SDHCI_INT_CMD_MASK) {
- sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+ intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
+ if (intmask & SDHCI_INT_CMD_MASK) {
writel(intmask & SDHCI_INT_CMD_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
- sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-
writel(intmask & SDHCI_INT_DATA_MASK,
host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
- if (intmask & SDHCI_INT_CARD_INT) {
- printk(KERN_ERR "%s: Unexpected card interrupt. Please "
- "report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
- }
-
if (intmask & SDHCI_INT_BUS_POWER) {
- printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
- "report this to " BUGMAIL ".\n",
+ printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
- sdhci_dumpregs(host);
+ writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
}
- if (intmask & SDHCI_INT_ACMD12ERR) {
- printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
+ intmask &= SDHCI_INT_BUS_POWER;
+
+ if (intmask) {
+ printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
"report this to " BUGMAIL ".\n",
- mmc_hostname(host->mmc));
+ mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
- writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
- }
-
- if (intmask)
writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+ }
result = IRQ_HANDLED;
static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
{
int ret;
+ unsigned int version;
struct sdhci_chip *chip;
struct mmc_host *mmc;
struct sdhci_host *host;
return -ENODEV;
}
+ if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
+ return -ENODEV;
+ }
+
+ if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
+ printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
+ return -ENODEV;
+ }
+
mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
if (!mmc)
return -ENOMEM;
goto release;
}
+ sdhci_reset(host, SDHCI_RESET_ALL);
+
+ version = readw(host->ioaddr + SDHCI_HOST_VERSION);
+ version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
+ if (version != 0) {
+ printk(KERN_ERR "%s: Unknown controller version (%d). "
+ "Cowardly refusing to continue.\n", host->slot_descr,
+ version);
+ ret = -ENODEV;
+ goto unmap;
+ }
+
caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
- if ((caps & SDHCI_CAN_DO_DMA) && ((pdev->class & 0x0000FF) == 0x01))
+ if (debug_nodma)
+ DBG("DMA forced off\n");
+ else if (debug_forcedma) {
+ DBG("DMA forced on\n");
+ host->flags |= SDHCI_USE_DMA;
+ } else if ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA)
+ DBG("Controller doesn't have DMA interface\n");
+ else if (!(caps & SDHCI_CAN_DO_DMA))
+ DBG("Controller doesn't have DMA capability\n");
+ else
host->flags |= SDHCI_USE_DMA;
if (host->flags & SDHCI_USE_DMA) {
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
+ host->max_block = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
+ if (host->max_block >= 3) {
+ printk(KERN_ERR "%s: Invalid maximum block size.\n",
+ host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ host->max_block = 512 << host->max_block;
+
/*
* Set host parameters.
*/
mmc->max_phys_segs = 16;
/*
- * Maximum number of sectors in one transfer. Limited by sector
- * count register.
+ * Maximum number of sectors in one transfer. Limited by DMA boundary
+ * size (512KiB), which means (512 KiB/512=) 1024 entries.
*/
- mmc->max_sectors = 0x3FFF;
+ mmc->max_sectors = 1024;
/*
* Maximum segment size. Could be one segment with the maximum number
}
chip->pdev = pdev;
+ chip->quirks = ent->driver_data;
+
+ if (debug_quirks)
+ chip->quirks = debug_quirks;
chip->num_slots = slots;
pci_set_drvdata(pdev, chip);
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
+module_param(debug_nodma, uint, 0444);
+module_param(debug_forcedma, uint, 0444);
+module_param(debug_quirks, uint, 0444);
+
MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+MODULE_PARM_DESC(debug_nodma, "Forcefully disable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_forcedma, "Forcefully enable DMA transfers. (default 0)");
+MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");