* For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
* I2C address is allways 0xC0.
*
- * $Id: tea5767.c,v 1.27 2005/07/31 12:10:56 mchehab Exp $
*
* Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
* This code is placed under the terms of the GNU General Public License
#define PREFIX "TEA5767 "
+/* from tuner-core.c */
+extern int tuner_debug;
+
/*****************************************************************************/
/******************************
#define TEA5767_PORT1_HIGH 0x01
-/* Forth register */
+/* Fourth register */
#define TEA5767_PORT2_HIGH 0x80
/* Chips stops working. Only I2C bus remains on */
#define TEA5767_STDBY 0x40
/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
#define TEA5767_SRCH_IND 0x01
-/* Fiveth register */
+/* Fifth register */
/* By activating, it will use Xtal at 13 MHz as reference for divider */
#define TEA5767_PLLREF_ENABLE 0x80
#define TEA5767_STEREO_MASK 0x80
#define TEA5767_IF_CNTR_MASK 0x7f
-/* Four register */
+/* Fourth register */
#define TEA5767_ADC_LEVEL_MASK 0xf0
/* should be 0 */
#define TEA5767_CHIP_ID_MASK 0x0f
-/* Fiveth register */
+/* Fifth register */
/* Reserved for future extensions */
#define TEA5767_RESERVED_MASK 0xff
enum tea5767_xtal_freq {
- TEA5767_LOW_LO_32768 = 0,
- TEA5767_HIGH_LO_32768 = 1,
- TEA5767_LOW_LO_13MHz = 2,
- TEA5767_HIGH_LO_13MHz = 3,
+ TEA5767_LOW_LO_32768 = 0,
+ TEA5767_HIGH_LO_32768 = 1,
+ TEA5767_LOW_LO_13MHz = 2,
+ TEA5767_HIGH_LO_13MHz = 3,
};
TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
buffer[4] = 0;
- if (t->mode == T_STANDBY) {
- tuner_dbg("TEA5767 set to standby mode\n");
- buffer[3] |= TEA5767_STDBY;
- }
-
if (t->audmode == V4L2_TUNER_MODE_MONO) {
tuner_dbg("TEA5767 set to mono\n");
buffer[2] |= TEA5767_MONO;
tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[4] |= TEA5767_PLLREF_ENABLE;
- div = (frq * 4000 / 16 + 700000 + 225000 + 25000) / 50000;
+ div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_13MHz:
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
buffer[4] |= TEA5767_PLLREF_ENABLE;
- div = (frq * 4000 / 16 - 700000 - 225000 + 25000) / 50000;
+ div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_32768:
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
buffer[3] |= TEA5767_XTAL_32768;
/* const 700=4000*175 Khz - to adjust freq to right value */
- div = ((frq * 4000 / 16 - 700000 - 225000) + 16384) >> 15;
+ div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
break;
case TEA5767_HIGH_LO_32768:
default:
if (5 != (rc = i2c_master_recv(c, buffer, 5)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
- return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << (13 - 4));
+ return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) << 8);
}
static int tea5767_stereo(struct i2c_client *c)
return ((buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO : 0);
}
+static void tea5767_standby(struct i2c_client *c)
+{
+ unsigned char buffer[5];
+ struct tuner *t = i2c_get_clientdata(c);
+ unsigned div, rc;
+
+ div = (87500 * 4 + 700 + 225 + 25) / 50; /* Set frequency to 87.5 MHz */
+ buffer[0] = (div >> 8) & 0x3f;
+ buffer[1] = div & 0xff;
+ buffer[2] = TEA5767_PORT1_HIGH;
+ buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
+ TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND | TEA5767_STDBY;
+ buffer[4] = 0;
+
+ if (5 != (rc = i2c_master_send(c, buffer, 5)))
+ tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
+}
+
int tea5767_autodetection(struct i2c_client *c)
{
unsigned char buffer[7] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int rc;
struct tuner *t = i2c_get_clientdata(c);
- if (7 != (rc = i2c_master_recv(c, buffer, 7))) {
+ if ((rc = i2c_master_recv(c, buffer, 7))< 5) {
tuner_warn("It is not a TEA5767. Received %i bytes.\n", rc);
return EINVAL;
}
* bit 0 : internally set to 0
* Byte 5: bit 7:0 : == 0
*/
- if (!((buffer[3] & 0x0f) == 0x00) && (buffer[4] == 0x00)) {
+ if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
tuner_warn("Chip ID is not zero. It is not a TEA5767\n");
return EINVAL;
}
- /* It seems that tea5767 returns 0xff after the 5th byte */
- if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
- tuner_warn("Returned more than 5 bytes. It is not a TEA5767\n");
- return EINVAL;
- }
/* It seems that tea5767 returns 0xff after the 5th byte */
if ((buffer[5] != 0xff) || (buffer[6] != 0xff)) {
{
struct tuner *t = i2c_get_clientdata(c);
- tuner_info("type set to %d (%s)\n", t->type,
- "Philips TEA5767HN FM Radio");
+ tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
strlcpy(c->name, "tea5767", sizeof(c->name));
- t->tv_freq = set_tv_freq;
- t->radio_freq = set_radio_freq;
+ t->set_tv_freq = set_tv_freq;
+ t->set_radio_freq = set_radio_freq;
t->has_signal = tea5767_signal;
t->is_stereo = tea5767_stereo;
+ t->standby = tea5767_standby;
return (0);
}