struct cx23885_board cx23885_boards[] = {
[CX23885_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
- .bridge = CX23885_BRIDGE_UNDEFINED,
+ /* Ensure safe default for unknown boards */
+ .clk_freq = 0,
.input = {{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = 0,
},
[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
.name = "Hauppauge WinTV-HVR1800lp",
- .bridge = CX23885_BRIDGE_885,
.portc = CX23885_MPEG_DVB,
.input = {{
.type = CX23885_VMUX_TELEVISION,
},
[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
.name = "Hauppauge WinTV-HVR1800",
- .bridge = CX23885_BRIDGE_887,
.portc = CX23885_MPEG_DVB,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.gpio0 = 0xff02,
}},
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1250] = {
+ .name = "Hauppauge WinTV-HVR1250",
+ .portc = CX23885_MPEG_DVB,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0xff00,
+ },{
+ .type = CX23885_VMUX_DEBUG,
+ .vmux = 0,
+ .gpio0 = 0xff01,
+ },{
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0xff02,
+ },{
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0xff02,
+ }},
+ },
+ [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
+ .name = "DViCO FusionHDTV5 Express",
+ .portb = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
+ .name = "Hauppauge WinTV-HVR1500Q",
+ .portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1500] = {
+ .name = "Hauppauge WinTV-HVR1500",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x7801,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7809,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7911,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1250,
+ },{
+ .subvendor = 0x18ac,
+ .subdevice = 0xd500,
+ .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7790,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7797,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7710,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7717,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, eeprom_data);
-
/* Make sure we support the board model */
switch (tv.model)
{
case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
- case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
- case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
- case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
+ case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
+ case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
+ case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
+ case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
+ case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
+ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
break;
default:
printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
dev->name, tv.model);
}
+void cx23885_gpio_setup(struct cx23885_dev *dev)
+{
+ switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* GPIO-0 cx24227 demodulator reset */
+ cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ /* GPIO-0 cx24227 demodulator */
+ /* GPIO-2 xc3028 tuner */
+
+ /* Put the parts into reset */
+ cx_set(GP0_IO, 0x00050000);
+ cx_clear(GP0_IO, 0x00000005);
+ msleep(5);
+
+ /* Bring the parts out of reset */
+ cx_set(GP0_IO, 0x00050005);
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ /* GPIO-0 cx24227 demodulator reset */
+ /* GPIO-2 xc5000 tuner reset */
+ cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ /* GPIO-0 656_CLK */
+ /* GPIO-1 656_D0 */
+ /* GPIO-2 8295A Reset */
+ /* GPIO-3-10 cx23417 data0-7 */
+ /* GPIO-11-14 cx23417 addr0-3 */
+ /* GPIO-15-18 cx23417 READY, CS, RD, WR */
+ /* GPIO-19 IR_RX */
+
+ /* Force the TDA8295A into reset and back */
+ cx_set(GP0_IO, 0x00040004);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x00000004);
+ mdelay(20);
+ cx_set(GP0_IO, 0x00040004);
+ mdelay(20);
+ break;
+ }
+}
+
+int cx23885_ir_init(struct cx23885_dev *dev)
+{
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ /* FIXME: Implement me */
+ break;
+ }
+
+ return 0;
+}
+
void cx23885_card_setup(struct cx23885_dev *dev)
{
+ struct cx23885_tsport *ts1 = &dev->ts1;
+ struct cx23885_tsport *ts2 = &dev->ts2;
+
static u8 eeprom[256];
if (dev->i2c_bus[0].i2c_rc == 0) {
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
- tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+ tveeprom_read(&dev->i2c_bus[0].i2c_client,
+ eeprom, sizeof(eeprom));
}
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0x80);
break;
}
+
+ switch (dev->board) {
+ case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+ ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+ default:
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ }
+
}
/* ------------------------------------------------------------------ */
-EXPORT_SYMBOL(cx23885_boards);
-
/*
* Local variables:
* c-basic-offset: 8
projects / linux-2.6 / blobdiff