#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <media/cx25840.h>
#include "cx23885.h"
struct cx23885_board cx23885_boards[] = {
[CX23885_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
+ /* Ensure safe default for unknown boards */
+ .clk_freq = 0,
.input = {{
.type = CX23885_VMUX_COMPOSITE1,
.vmux = 0,
},
[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
.name = "Hauppauge WinTV-HVR1800",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
.input = {{
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
- .gpio0 = 0xff00,
- },{
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .gpio0 = 0,
},{
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
- .gpio0 = 0xff02,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .gpio0 = 0,
},{
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
- .gpio0 = 0xff02,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .gpio0 = 0,
}},
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "DViCO FusionHDTV5 Express",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
+ .name = "Hauppauge WinTV-HVR1500Q",
+ .portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1500] = {
+ .name = "Hauppauge WinTV-HVR1500",
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
.subvendor = 0x0070,
.subdevice = 0x7801,
.card = CX23885_BOARD_HAUPPAUGE_HVR1800,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7809,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1800,
},{
.subvendor = 0x0070,
.subdevice = 0x7911,
.subvendor = 0x18ac,
.subdevice = 0xd500,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7790,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7797,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7710,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
+ },{
+ .subvendor = 0x0070,
+ .subdevice = 0x7717,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1500,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
switch (tv.model)
{
case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
- case 77001: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
- case 78501: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
- case 78521: /* WinTV-HVR1800 (PCIe, Retail, IR, Dual channel ATSC and MPEG2 HW Encoder */
+ case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
+ case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
+ case 77041: /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM and Basic analog */
+ case 77051: /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM and Basic analog */
+ case 78011: /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78501: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78521: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78531: /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
+ case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
+ case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+ case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
+ case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
break;
default:
printk("%s: warning: unknown hauppauge model #%d\n", dev->name, tv.model);
dev->name, tv.model);
}
+/* Tuner callback function for cx23885 boards. Currently only needed
+ * for HVR1500Q, which has an xc5000 tuner.
+ */
+int cx23885_tuner_callback(void *priv, int command, int arg)
+{
+ struct cx23885_i2c *bus = priv;
+ struct cx23885_dev *dev = bus->dev;
+
+ switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ if(command == 0) { /* Tuner Reset Command from xc5000 */
+ /* Drive the tuner into reset and out */
+ cx_clear(GP0_IO, 0x00000004);
+ mdelay(200);
+ cx_set(GP0_IO, 0x00000004);
+ return 0;
+ }
+ else {
+ printk(KERN_ERR
+ "%s(): Unknow command.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ break;
+ }
+
+ return 0; /* Should never be here */
+}
+
void cx23885_gpio_setup(struct cx23885_dev *dev)
{
switch(dev->board) {
/* GPIO-0 cx24227 demodulator reset */
cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ /* GPIO-0 cx24227 demodulator */
+ /* GPIO-2 xc3028 tuner */
+
+ /* Put the parts into reset */
+ cx_set(GP0_IO, 0x00050000);
+ cx_clear(GP0_IO, 0x00000005);
+ msleep(5);
+
+ /* Bring the parts out of reset */
+ cx_set(GP0_IO, 0x00050005);
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ /* GPIO-0 cx24227 demodulator reset */
+ /* GPIO-2 xc5000 tuner reset */
+ cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
/* GPIO-11-14 cx23417 addr0-3 */
/* GPIO-15-18 cx23417 READY, CS, RD, WR */
/* GPIO-19 IR_RX */
- // FIXME: Analog requires the tuner is brought out of reset
+
+ /* Force the TDA8295A into reset and back */
+ cx_set(GP0_IO, 0x00040004);
+ mdelay(20);
+ cx_clear(GP0_IO, 0x00000004);
+ mdelay(20);
+ cx_set(GP0_IO, 0x00040004);
+ mdelay(20);
break;
}
}
{
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
/* FIXME: Implement me */
break;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
default: