static int repeat_period = 33;
module_param(repeat_period, int, 0644);
+int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+int ir_rc5_key_timeout = 200;
+module_param(ir_rc5_key_timeout, int, 0644);
+
#define DEVNAME "bttv-input"
/* ---------------------------------------------------------------------- */
static void ir_handle_key(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
u32 gpio,data;
/* read gpio value */
void bttv_input_irq(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
if (!ir->polling)
ir_handle_key(btv);
static void bttv_input_timer(unsigned long data)
{
struct bttv *btv = (struct bttv*)data;
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
unsigned long timeout;
ir_handle_key(btv);
/* ---------------------------------------------------------------*/
-static int rc5_remote_gap = 885;
-module_param(rc5_remote_gap, int, 0644);
-static int rc5_key_timeout = 200;
-module_param(rc5_key_timeout, int, 0644);
-
-#define RC5_START(x) (((x)>>12)&3)
-#define RC5_TOGGLE(x) (((x)>>11)&1)
-#define RC5_ADDR(x) (((x)>>6)&31)
-#define RC5_INSTR(x) ((x)&63)
-
-/* decode raw bit pattern to RC5 code */
-static u32 rc5_decode(unsigned int code)
-{
- unsigned int org_code = code;
- unsigned int pair;
- unsigned int rc5 = 0;
- int i;
-
- code = (code << 1) | 1;
- for (i = 0; i < 14; ++i) {
- pair = code & 0x3;
- code >>= 2;
-
- rc5 <<= 1;
- switch (pair) {
- case 0:
- case 2:
- break;
- case 1:
- rc5 |= 1;
- break;
- case 3:
- dprintk(KERN_WARNING "bad code: %x\n", org_code);
- return 0;
- }
- }
- dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
- "instr=%x\n", rc5, org_code, RC5_START(rc5),
- RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
- return rc5;
-}
-
static int bttv_rc5_irq(struct bttv *btv)
{
- struct bttv_ir *ir = btv->remote;
+ struct card_ir *ir = btv->remote;
struct timeval tv;
u32 gpio;
u32 gap;
/* only if in the code (otherwise spurious IRQ or timer
late) */
if (ir->last_bit < 28) {
- ir->last_bit = (gap - rc5_remote_gap / 2) /
- rc5_remote_gap;
+ ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+ ir_rc5_remote_gap;
ir->code |= 1 << ir->last_bit;
}
/* starting new code */
return 1;
}
+/* ---------------------------------------------------------------------- */
-static void bttv_rc5_timer_end(unsigned long data)
+static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
{
- struct bttv_ir *ir = (struct bttv_ir *)data;
- struct timeval tv;
- unsigned long current_jiffies, timeout;
- u32 gap;
-
- /* get time */
- current_jiffies = jiffies;
- do_gettimeofday(&tv);
+ if (ir->polling) {
+ init_timer(&ir->timer);
+ ir->timer.function = bttv_input_timer;
+ ir->timer.data = (unsigned long)btv;
+ ir->timer.expires = jiffies + HZ;
+ add_timer(&ir->timer);
+ } else if (ir->rc5_gpio) {
+ /* set timer_end for code completion */
+ init_timer(&ir->timer_end);
+ ir->timer_end.function = ir_rc5_timer_end;
+ ir->timer_end.data = (unsigned long)ir;
- /* avoid overflow with gap >1s */
- if (tv.tv_sec - ir->base_time.tv_sec > 1) {
- gap = 200000;
- } else {
- gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
- tv.tv_usec - ir->base_time.tv_usec;
+ init_timer(&ir->timer_keyup);
+ ir->timer_keyup.function = ir_rc5_timer_keyup;
+ ir->timer_keyup.data = (unsigned long)ir;
+ ir->shift_by = 1;
+ ir->start = 3;
+ ir->addr = 0x0;
+ ir->rc5_key_timeout = ir_rc5_key_timeout;
+ ir->rc5_remote_gap = ir_rc5_remote_gap;
}
+}
- /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
- if (gap < 28000) {
- dprintk(KERN_WARNING "spurious timer_end\n");
- return;
+static void bttv_ir_stop(struct bttv *btv)
+{
+ if (btv->remote->polling) {
+ del_timer_sync(&btv->remote->timer);
+ flush_scheduled_work();
}
- ir->active = 0;
- if (ir->last_bit < 20) {
- /* ignore spurious codes (caused by light/other remotes) */
- dprintk(KERN_WARNING "short code: %x\n", ir->code);
- } else {
- u32 rc5 = rc5_decode(ir->code);
-
- /* two start bits? */
- if (RC5_START(rc5) != 3) {
- dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5));
-
- /* right address? */
- } else if (RC5_ADDR(rc5) == 0x0) {
- u32 toggle = RC5_TOGGLE(rc5);
- u32 instr = RC5_INSTR(rc5);
-
- /* Good code, decide if repeat/repress */
- if (toggle != RC5_TOGGLE(ir->last_rc5) ||
- instr != RC5_INSTR(ir->last_rc5)) {
- dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr,
- toggle);
- ir_input_nokey(ir->dev, &ir->ir);
- ir_input_keydown(ir->dev, &ir->ir, instr,
- instr);
- }
-
- /* Set/reset key-up timer */
- timeout = current_jiffies + (500 + rc5_key_timeout
- * HZ) / 1000;
- mod_timer(&ir->timer_keyup, timeout);
-
- /* Save code for repeat test */
- ir->last_rc5 = rc5;
- }
- }
-}
+ if (btv->remote->rc5_gpio) {
+ u32 gpio;
-static void bttv_rc5_timer_keyup(unsigned long data)
-{
- struct bttv_ir *ir = (struct bttv_ir *)data;
+ del_timer_sync(&btv->remote->timer_end);
+ flush_scheduled_work();
- dprintk(KERN_DEBUG "key released\n");
- ir_input_nokey(ir->dev, &ir->ir);
+ gpio = bttv_gpio_read(&btv->c);
+ bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
+ }
}
-/* ---------------------------------------------------------------------- */
-
int bttv_input_init(struct bttv *btv)
{
- struct bttv_ir *ir;
+ struct card_ir *ir;
IR_KEYTAB_TYPE *ir_codes = NULL;
struct input_dev *input_dev;
int ir_type = IR_TYPE_OTHER;
+ int err = -ENOMEM;
if (!btv->has_remote)
return -ENODEV;
ir = kzalloc(sizeof(*ir),GFP_KERNEL);
input_dev = input_allocate_device();
- if (!ir || !input_dev) {
- kfree(ir);
- input_free_device(input_dev);
- return -ENOMEM;
- }
- memset(ir,0,sizeof(*ir));
+ if (!ir || !input_dev)
+ goto err_out_free;
/* detect & configure */
switch (btv->c.type) {
ir->mask_keyup = 0x010000;
ir->polling = 50; // ms
break;
+ case BTTV_BOARD_PV_M4900:
case BTTV_BOARD_PV_BT878P_9B:
case BTTV_BOARD_PV_BT878P_PLUS:
ir_codes = ir_codes_pixelview;
break;
}
if (NULL == ir_codes) {
- dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n",btv->c.type);
- kfree(ir);
- input_free_device(input_dev);
- return -ENODEV;
+ dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n", btv->c.type);
+ err = -ENODEV;
+ goto err_out_free;
}
if (ir->rc5_gpio) {
input_dev->cdev.dev = &btv->c.pci->dev;
btv->remote = ir;
- if (ir->polling) {
- init_timer(&ir->timer);
- ir->timer.function = bttv_input_timer;
- ir->timer.data = (unsigned long)btv;
- ir->timer.expires = jiffies + HZ;
- add_timer(&ir->timer);
- } else if (ir->rc5_gpio) {
- /* set timer_end for code completion */
- init_timer(&ir->timer_end);
- ir->timer_end.function = bttv_rc5_timer_end;
- ir->timer_end.data = (unsigned long)ir;
-
- init_timer(&ir->timer_keyup);
- ir->timer_keyup.function = bttv_rc5_timer_keyup;
- ir->timer_keyup.data = (unsigned long)ir;
- }
+ bttv_ir_start(btv, ir);
/* all done */
- input_register_device(btv->remote->dev);
- printk(DEVNAME ": %s detected at %s\n",ir->name,ir->phys);
+ err = input_register_device(btv->remote->dev);
+ if (err)
+ goto err_out_stop;
/* the remote isn't as bouncy as a keyboard */
ir->dev->rep[REP_DELAY] = repeat_delay;
ir->dev->rep[REP_PERIOD] = repeat_period;
return 0;
+
+ err_out_stop:
+ bttv_ir_stop(btv);
+ btv->remote = NULL;
+ err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return err;
}
void bttv_input_fini(struct bttv *btv)
if (btv->remote == NULL)
return;
- if (btv->remote->polling) {
- del_timer_sync(&btv->remote->timer);
- flush_scheduled_work();
- }
-
-
- if (btv->remote->rc5_gpio) {
- u32 gpio;
-
- del_timer_sync(&btv->remote->timer_end);
- flush_scheduled_work();
-
- gpio = bttv_gpio_read(&btv->c);
- bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
- }
-
+ bttv_ir_stop(btv);
input_unregister_device(btv->remote->dev);
kfree(btv->remote);
btv->remote = NULL;