menuconfig VIDEO_CAPTURE_DRIVERS
bool "Video capture adapters"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L2
default y
---help---
Say Y here to enable selecting the video adapters for
webcams, analog TV, and hybrid analog/digital TV.
Some of those devices also supports FM radio.
-if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
+if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for tda7432 audio decoder chip found on some bt8xx boards.
config VIDEO_TDA9875
tristate "Philips TDA9875 audio processor"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for tda9875 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called msp3400.
+config VIDEO_CS5345
+ tristate "Cirrus Logic CS5345 audio ADC"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs5345.
+
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
To compile this driver as a module, choose M here: the
module will be called cs53l32a.
+config VIDEO_M52790
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Mitsubishi M52790 A/V switch.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
+
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
config VIDEO_SAA711X
tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7113/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Philips SAA7171/3/4 audio/video decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa717x.
+
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L1 && I2C
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && EXPERIMENTAL
+ depends on VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_COMMON
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7127/9 digital video encoders.
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
select VIDEOBUF_VMALLOC
default n
---help---
source "drivers/media/video/cx23885/Kconfig"
+source "drivers/media/video/au0828/Kconfig"
+
source "drivers/media/video/ivtv/Kconfig"
config VIDEO_M32R_AR
To compile this driver as a module, choose M here: the
module will be called zr364xx.
+config USB_STKWEBCAM
+ tristate "USB Syntek DC1125 Camera support"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use this type of camera.
+ Supported devices are typically found in some Asus laptops,
+ with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+ may be supported by the stk11xx driver, from which this is
+ derived, see http://stk11xx.sourceforge.net
+
+ To compile this driver as a module, choose M here: the
+ module will be called stkwebcam.
+
endif # V4L_USB_DRIVERS
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2
+ select VIDEOBUF_DMA_SG
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config MT9M001_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9m001"
+ depends on SOC_CAMERA_MT9M001 && GENERIC_GPIO
+ help
+ Select this if your MT9M001 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config MT9V022_PCA9536_SWITCH
+ bool "pca9536 datawidth switch for mt9v022"
+ depends on SOC_CAMERA_MT9V022 && GENERIC_GPIO
+ help
+ Select this if your MT9V022 camera uses a PCA9536 I2C GPIO
+ extender to switch between 8 and 10 bit datawidth modes
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x
+ select SOC_CAMERA
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
endif # VIDEO_CAPTURE_DRIVERS