comment "Video Adapters"
-config VIDEO_BT848
- tristate "BT848 Video For Linux"
- depends on VIDEO_DEV && PCI && I2C
- select I2C_ALGOBIT
- select FW_LOADER
- select VIDEO_BTCX
- select VIDEO_BUF
- select VIDEO_IR
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
+config VIDEO_ADV_DEBUG
+ bool "Enable advanced debug functionality"
+ depends on VIDEO_DEV
+ default n
---help---
- Support for BT848 based frame grabber/overlay boards. This includes
- the Miro, Hauppauge and STB boards. Please read the material in
- <file:Documentation/video4linux/bttv/> for more information.
+ Say Y here to enable advanced debugging functionality on some
+ V4L devices.
+ In doubt, say N.
- To compile this driver as a module, choose M here: the
- module will be called bttv.
-
-config VIDEO_BT848_DVB
- bool "DVB/ATSC Support for bt878 based TV cards"
- depends on VIDEO_BT848 && DVB_CORE
- select DVB_BT8XX
- ---help---
- This adds support for DVB/ATSC cards based on the BT878 chip.
+source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
otherwise say N. This will not work with the Creative Webcam III.
It is also available as a module (cpia_usb).
+source "drivers/media/video/cpia2/Kconfig"
+
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
depends on VIDEO_DEV && I2C
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
- <http://www.stradis.com/decoder.html>.
+ <http://www.stradis.com/>.
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
To compile this driver as a module, choose M here: the
module will be called zr36067.
-
+
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
depends on VIDEO_ZORAN
config VIDEO_ZORAN_DC30
tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- help
+ depends on VIDEO_ZORAN
+ help
Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
card. This also supports really old DC10 cards based on the
zr36050 MJPEG codec and zr36016 VFE.
---help---
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
-
+
To compile this driver as a module, choose M here: the
module will be called mxb.
for SAA7146 bases boards, so if you have some unsupported
saa7146 based, analog video card, chances are good that it
will work with this skeleton driver.
-
+
To compile this driver as a module, choose M here: the
module will be called dpc7146.
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
-
+
To compile this driver as a module, choose M here: the
module will be called hexium_orion.
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
card is *not* fully supported.
-
+
To compile this driver as a module, choose M here: the
module will be called hexium_gemini.
Say Y here to use the Renesas M64278E-800 camera module,
which supports VGA(640x480 pixcels) size of images.
-config VIDEO_AUDIO_DECODER
- tristate "Add support for additional audio chipsets"
+config VIDEO_MSP3400
+ tristate "Micronas MSP34xx audio decoders"
+ depends on VIDEO_DEV && I2C
+ ---help---
+ Support for the Micronas MSP34xx series of audio decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msp3400
+
+config VIDEO_CS53L32A
+ tristate "Cirrus Logic CS53L32A audio ADC"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Cirrus Logic CS53L32A low voltage
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs53l32a
+
+config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC"
+ depends on VIDEO_DEV && I2C && EXPERIMENTAL
+ ---help---
+ Support for the Wolfson Microelectronics WM8775
+ high performance stereo A/D Converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wm8775
+
+source "drivers/media/video/cx25840/Kconfig"
+
+config VIDEO_SAA711X
+ tristate "Philips SAA7113/4/5 video decoders"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Say Y here to compile drivers for WM8775 and CS53L32A audio
- decoders.
+ Support for the Philips SAA7113/4/5 video decoders.
-config VIDEO_DECODER
- tristate "Add support for additional video chipsets"
+ To compile this driver as a module, choose M here: the
+ module will be called saa7115
+
+config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
depends on VIDEO_DEV && I2C && EXPERIMENTAL
---help---
- Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
- video decoders.
+ Support for the Philips SAA7127/9 digital video encoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7127
endmenu