#include "tda826x.h"
#include "lnbp21.h"
#include "bsru6.h"
+#include "bsbe1.h"
static int diseqc_method;
module_param(diseqc_method, int, 0444);
DiseqcSendByte(budget, 0xff);
else {
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
- udelay(12500);
+ mdelay(12);
+ udelay(500);
saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
}
msleep(20);
static int grundig_29504_401_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
- struct budget* budget = (struct budget*) fe->dvb->priv;
+ struct budget *budget = fe->dvb->priv;
+ u8 *tuner_addr = fe->tuner_priv;
u32 div;
u8 cfg, cpump, band_select;
u8 data[4];
- struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+ struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
+
+ if (tuner_addr)
+ msg.addr = *tuner_addr;
+ else
+ msg.addr = 0x61;
div = (36125000 + params->frequency) / 166666;
.demod_address = 0x55,
};
+static struct l64781_config grundig_29504_401_config_activy = {
+ .demod_address = 0x54,
+};
+
+static u8 tuner_address_grundig_29504_401_activy = 0x60;
+
static int grundig_29504_451_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct budget* budget = (struct budget*) fe->dvb->priv;
static struct s5h1420_config s5h1420_config = {
.demod_address = 0x53,
.invert = 1,
+ .cdclk_polarity = 1,
};
static struct tda10086_config tda10086_config = {
.demod_address = 0x0e,
.invert = 0,
.diseqc_tone = 1,
+ .xtal_freq = TDA10086_XTAL_16M,
};
+static struct stv0299_config alps_bsru6_config_activy = {
+ .demod_address = 0x68,
+ .inittab = alps_bsru6_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .op0_off = 1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+};
+
+static struct stv0299_config alps_bsbe1_config_activy = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .op0_off = 1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsbe1_set_symbol_rate,
+};
+
+
+static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
+{
+ u8 val;
+ struct i2c_msg msg[] = {
+ { .addr = adr, .flags = 0, .buf = ®, .len = 1 },
+ { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+ };
+
+ return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
+}
+
static u8 read_pwm(struct budget* budget)
{
u8 b = 0xff;
static void frontend_init(struct budget *budget)
{
+ (void)alps_bsbe1_config; /* avoid warning */
+
switch(budget->dev->pci->subsystem_device) {
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
case 0x1013:
}
break;
- case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059))
- budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
- if (budget->dvb_frontend) {
- budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
- budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
- budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
- budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
+ {
+ int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
+
+ if (subtype < 0)
+ break;
+ /* fixme: find a better way to identify the card */
+ if (subtype < 0x36) {
+ /* assume ALPS BSRU6 */
+ budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+ budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+ budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+ budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ break;
+ }
+ } else {
+ /* assume ALPS BSBE1 */
+ /* reset tuner */
+ saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
+ msleep(50);
+ saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
+ msleep(250);
+ budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
+ budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+ budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+ budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ break;
+ }
}
break;
+ }
case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
}
break;
+ case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
+ budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
+ budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
+ }
+ break;
+
case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ printk("%s: No LNBP21 found!\n", __func__);
goto error_out;
}
break;
budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
if (budget->dvb_frontend) {
if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL)
- printk("%s: No tda826x found!\n", __FUNCTION__);
+ printk("%s: No tda826x found!\n", __func__);
if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
- printk("%s: No LNBP21 found!\n", __FUNCTION__);
+ printk("%s: No LNBP21 found!\n", __func__);
goto error_out;
}
break;
MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
+MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
+ MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
{
.vendor = 0,
}
projects / linux-2.6 / blobdiff