tristate "Support for various USB DVB devices"
depends on DVB_CORE && USB && I2C
select FW_LOADER
- select DVB_PLL
help
By enabling this you will be able to choose the various supported
USB1.1 and USB2.0 DVB devices.
depends on DVB_USB
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
config DVB_USB_DIBUSB_MB
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
depends on DVB_USB
+ select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MB
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
config DVB_USB_DIB0700
tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
+ select DVB_DIB7000P
+ select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
config DVB_USB_UMT_010
tristate "HanfTek UMT-010 DVB-T USB2.0 support"
depends on DVB_USB
+ select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
help
config DVB_USB_CXUSB
tristate "Conexant USB2.0 hybrid reference design support"
depends on DVB_USB
+ select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
Medion MD95700 hybrid USB2.0 device.
DViCO FusionHDTV (Bluebird) USB2.0 devices
+config DVB_USB_M920X
+ tristate "Uli m920x DVB-T USB2.0 support"
+ depends on DVB_USB
+ select DVB_MT352 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
+ Currently, only devices with a product id of
+ "DTV USB MINI" (in cold state) are supported.
+ Firmware required.
+
+config DVB_USB_GL861
+ tristate "Genesys Logic GL861 USB2.0 support"
+ depends on DVB_USB
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
+ receiver with USB ID 0db0:5581.
+
+config DVB_USB_AU6610
+ tristate "Alcor Micro AU6610 USB2.0 support"
+ depends on DVB_USB
+ select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
+
config DVB_USB_DIGITV
tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
+ select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_NXT6000 if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
help
depends on DVB_USB
select DVB_DIB3000MC
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
+config DVB_USB_TTUSB2
+ tristate "Pinnacle 400e DVB-S USB2.0 support"
+ depends on DVB_USB
+ select DVB_TDA10086 if !DVB_FE_CUSTOMISE
+ select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+ select DVB_TDA826X if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
+ firmware protocol used by this module is similar to the one used by the
+ old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+
config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
depends on DVB_USB
The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
The WT-220U and its clones are pen-sized.
+
+config DVB_USB_OPERA1
+ tristate "Opera1 DVB-S USB2.0 receiver"
+ depends on DVB_USB
+ select DVB_STV0299 if !DVB_FE_CUSTOMISE
+ select DVB_PLL if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Opera DVB-S USB2.0 receiver.
+
+config DVB_USB_AF9005
+ tristate "Afatech AF9005 DVB-T USB1.1 support"
+ depends on DVB_USB && EXPERIMENTAL
+ select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ help
+ Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
+ and the TerraTec Cinergy T USB XE (Rev.1)
+
+config DVB_USB_AF9005_REMOTE
+ tristate "Afatech AF9005 default remote control support"
+ depends on DVB_USB_AF9005
+ help
+ Say Y here to support the default remote control decoding for the
+ Afatech AF9005 based receiver.
+