goto create_qp_exit1;
}
- if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
- parms.sigtype = HCALL_SIGT_EVERY;
- else
- parms.sigtype = HCALL_SIGT_BY_WQE;
+ /* Always signal by WQE so we can hide circ. WQEs */
+ parms.sigtype = HCALL_SIGT_BY_WQE;
/* UD_AV CIRCUMVENTION */
max_send_sge = init_attr->cap.max_send_sge;
parms.squeue.max_sge = max_send_sge;
parms.rqueue.max_sge = max_recv_sge;
+ /* RC QPs need one more SWQE for unsolicited ack circumvention */
+ if (qp_type == IB_QPT_RC)
+ parms.squeue.max_wr++;
+
if (EHCA_BMASK_GET(HCA_CAP_MINI_QP, shca->hca_cap)) {
if (HAS_SQ(my_qp))
ehca_determine_small_queue(
parms.squeue.act_nr_sges = 1;
parms.rqueue.act_nr_sges = 1;
}
+ /* hide the extra WQE */
+ parms.squeue.act_nr_wqes--;
break;
case IB_QPT_UD:
case IB_QPT_GSI:
init_attr->cap.max_send_wr = parms.squeue.act_nr_wqes;
my_qp->init_attr = *init_attr;
+ if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
+ shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
+ &my_qp->ib_qp;
+ if (ehca_nr_ports < 0) {
+ /* alloc array to cache subsequent modify qp parms
+ * for autodetect mode
+ */
+ my_qp->mod_qp_parm =
+ kzalloc(EHCA_MOD_QP_PARM_MAX *
+ sizeof(*my_qp->mod_qp_parm),
+ GFP_KERNEL);
+ if (!my_qp->mod_qp_parm) {
+ ehca_err(pd->device,
+ "Could not alloc mod_qp_parm");
+ goto create_qp_exit4;
+ }
+ }
+ }
+
/* NOTE: define_apq0() not supported yet */
if (qp_type == IB_QPT_GSI) {
h_ret = ehca_define_sqp(shca, my_qp, init_attr);
if (h_ret != H_SUCCESS) {
ret = ehca2ib_return_code(h_ret);
- goto create_qp_exit4;
+ goto create_qp_exit5;
}
}
if (ret) {
ehca_err(pd->device,
"Couldn't assign qp to send_cq ret=%i", ret);
- goto create_qp_exit4;
+ goto create_qp_exit5;
}
}
if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
ehca_err(pd->device, "Copy to udata failed");
ret = -EINVAL;
- goto create_qp_exit4;
+ goto create_qp_exit6;
}
}
return my_qp;
+create_qp_exit6:
+ ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
+
+create_qp_exit5:
+ kfree(my_qp->mod_qp_parm);
+
create_qp_exit4:
if (HAS_RQ(my_qp))
ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
/* copy back return values */
srq_init_attr->attr.max_wr = qp_init_attr.cap.max_recv_wr;
- srq_init_attr->attr.max_sge = qp_init_attr.cap.max_recv_sge;
+ srq_init_attr->attr.max_sge = 3;
/* drive SRQ into RTR state */
mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
update_mask,
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
- ehca_err(pd->device, "Could not modify SRQ to INIT"
+ ehca_err(pd->device, "Could not modify SRQ to INIT "
"ehca_qp=%p qp_num=%x h_ret=%li",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
update_mask,
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
- ehca_err(pd->device, "Could not enable SRQ"
+ ehca_err(pd->device, "Could not enable SRQ "
"ehca_qp=%p qp_num=%x h_ret=%li",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
update_mask,
mqpcb, my_qp->galpas.kernel);
if (hret != H_SUCCESS) {
- ehca_err(pd->device, "Could not modify SRQ to RTR"
+ ehca_err(pd->device, "Could not modify SRQ to RTR "
"ehca_qp=%p qp_num=%x h_ret=%li",
my_qp, my_qp->real_qp_num, hret);
goto create_srq2;
unsigned long flags = 0;
/* do query_qp to obtain current attr values */
- mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
+ mqpcb = ehca_alloc_fw_ctrlblock(GFP_ATOMIC);
if (!mqpcb) {
ehca_err(ibqp->device, "Could not get zeroed page for mqpcb "
"ehca_qp=%p qp_num=%x ", my_qp, ibqp->qp_num);
update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_P_KEY_IDX, 1);
}
if (attr_mask & IB_QP_PORT) {
+ struct ehca_sport *sport;
+ struct ehca_qp *aqp1;
if (attr->port_num < 1 || attr->port_num > shca->num_ports) {
ret = -EINVAL;
ehca_err(ibqp->device, "Invalid port=%x. "
shca->num_ports);
goto modify_qp_exit2;
}
+ sport = &shca->sport[attr->port_num - 1];
+ if (!sport->ibqp_sqp[IB_QPT_GSI]) {
+ /* should not occur */
+ ret = -EFAULT;
+ ehca_err(ibqp->device, "AQP1 was not created for "
+ "port=%x", attr->port_num);
+ goto modify_qp_exit2;
+ }
+ aqp1 = container_of(sport->ibqp_sqp[IB_QPT_GSI],
+ struct ehca_qp, ib_qp);
+ if (ibqp->qp_type != IB_QPT_GSI &&
+ ibqp->qp_type != IB_QPT_SMI &&
+ aqp1->mod_qp_parm) {
+ /*
+ * firmware will reject this modify_qp() because
+ * port is not activated/initialized fully
+ */
+ ret = -EFAULT;
+ ehca_warn(ibqp->device, "Couldn't modify qp port=%x: "
+ "either port is being activated (try again) "
+ "or cabling issue", attr->port_num);
+ goto modify_qp_exit2;
+ }
mqpcb->prim_phys_port = attr->port_num;
update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_PHYS_PORT, 1);
}
}
if (attr_mask & IB_QP_PATH_MTU) {
+ /* store ld(MTU) */
+ my_qp->mtu_shift = attr->path_mtu + 7;
mqpcb->path_mtu = attr->path_mtu;
update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PATH_MTU, 1);
}
int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
struct ib_udata *udata)
{
+ struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
+ ib_device);
struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
ib_pd);
return -EINVAL;
}
+ /* The if-block below caches qp_attr to be modified for GSI and SMI
+ * qps during the initialization by ib_mad. When the respective port
+ * is activated, ie we got an event PORT_ACTIVE, we'll replay the
+ * cached modify calls sequence, see ehca_recover_sqs() below.
+ * Why that is required:
+ * 1) If one port is connected, older code requires that port one
+ * to be connected and module option nr_ports=1 to be given by
+ * user, which is very inconvenient for end user.
+ * 2) Firmware accepts modify_qp() only if respective port has become
+ * active. Older code had a wait loop of 30sec create_qp()/
+ * define_aqp1(), which is not appropriate in practice. This
+ * code now removes that wait loop, see define_aqp1(), and always
+ * reports all ports to ib_mad resp. users. Only activated ports
+ * will then usable for the users.
+ */
+ if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI) {
+ int port = my_qp->init_attr.port_num;
+ struct ehca_sport *sport = &shca->sport[port - 1];
+ unsigned long flags;
+ spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+ /* cache qp_attr only during init */
+ if (my_qp->mod_qp_parm) {
+ struct ehca_mod_qp_parm *p;
+ if (my_qp->mod_qp_parm_idx >= EHCA_MOD_QP_PARM_MAX) {
+ ehca_err(&shca->ib_device,
+ "mod_qp_parm overflow state=%x port=%x"
+ " type=%x", attr->qp_state,
+ my_qp->init_attr.port_num,
+ ibqp->qp_type);
+ spin_unlock_irqrestore(&sport->mod_sqp_lock,
+ flags);
+ return -EINVAL;
+ }
+ p = &my_qp->mod_qp_parm[my_qp->mod_qp_parm_idx];
+ p->mask = attr_mask;
+ p->attr = *attr;
+ my_qp->mod_qp_parm_idx++;
+ ehca_dbg(&shca->ib_device,
+ "Saved qp_attr for state=%x port=%x type=%x",
+ attr->qp_state, my_qp->init_attr.port_num,
+ ibqp->qp_type);
+ spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+ }
+
return internal_modify_qp(ibqp, attr, attr_mask, 0);
}
+void ehca_recover_sqp(struct ib_qp *sqp)
+{
+ struct ehca_qp *my_sqp = container_of(sqp, struct ehca_qp, ib_qp);
+ int port = my_sqp->init_attr.port_num;
+ struct ib_qp_attr attr;
+ struct ehca_mod_qp_parm *qp_parm;
+ int i, qp_parm_idx, ret;
+ unsigned long flags, wr_cnt;
+
+ if (!my_sqp->mod_qp_parm)
+ return;
+ ehca_dbg(sqp->device, "SQP port=%x qp_num=%x", port, sqp->qp_num);
+
+ qp_parm = my_sqp->mod_qp_parm;
+ qp_parm_idx = my_sqp->mod_qp_parm_idx;
+ for (i = 0; i < qp_parm_idx; i++) {
+ attr = qp_parm[i].attr;
+ ret = internal_modify_qp(sqp, &attr, qp_parm[i].mask, 0);
+ if (ret) {
+ ehca_err(sqp->device, "Could not modify SQP port=%x "
+ "qp_num=%x ret=%x", port, sqp->qp_num, ret);
+ goto free_qp_parm;
+ }
+ ehca_dbg(sqp->device, "SQP port=%x qp_num=%x in state=%x",
+ port, sqp->qp_num, attr.qp_state);
+ }
+
+ /* re-trigger posted recv wrs */
+ wr_cnt = my_sqp->ipz_rqueue.current_q_offset /
+ my_sqp->ipz_rqueue.qe_size;
+ if (wr_cnt) {
+ spin_lock_irqsave(&my_sqp->spinlock_r, flags);
+ hipz_update_rqa(my_sqp, wr_cnt);
+ spin_unlock_irqrestore(&my_sqp->spinlock_r, flags);
+ ehca_dbg(sqp->device, "doorbell port=%x qp_num=%x wr_cnt=%lx",
+ port, sqp->qp_num, wr_cnt);
+ }
+
+free_qp_parm:
+ kfree(qp_parm);
+ /* this prevents subsequent calls to modify_qp() to cache qp_attr */
+ my_sqp->mod_qp_parm = NULL;
+}
+
int ehca_query_qp(struct ib_qp *qp,
struct ib_qp_attr *qp_attr,
int qp_attr_mask, struct ib_qp_init_attr *qp_init_attr)
}
srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1;
- srq_attr->max_sge = qpcb->actual_nr_sges_in_rq_wqe;
+ srq_attr->max_sge = 3;
srq_attr->srq_limit = EHCA_BMASK_GET(
MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit);
struct ehca_shca *shca = container_of(dev, struct ehca_shca, ib_device);
struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
ib_pd);
+ struct ehca_sport *sport = &shca->sport[my_qp->init_attr.port_num - 1];
u32 cur_pid = current->tgid;
u32 qp_num = my_qp->real_qp_num;
int ret;
port_num = my_qp->init_attr.port_num;
qp_type = my_qp->init_attr.qp_type;
+ if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
+ spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+ kfree(my_qp->mod_qp_parm);
+ my_qp->mod_qp_parm = NULL;
+ shca->sport[port_num - 1].ibqp_sqp[qp_type] = NULL;
+ spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+ }
+
/* no support for IB_QPT_SMI yet */
if (qp_type == IB_QPT_GSI) {
struct ib_event event;
projects / linux-2.6 / blobdiff