#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
+#include <linux/stringify.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
*/
static int max_sectors = SBP2_MAX_SECTORS;
module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+ __stringify(SBP2_MAX_SECTORS) ")");
/*
* Exclusive login to sbp2 device? In most cases, the sbp2 driver should
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
/*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
*
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ * Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ * When scsi_mod probes the device, let the inquiry command look like that
+ * from MS Windows.
+ *
+ * - skip mode page 8
+ * Suppress sending of mode_sense for mode page 8 if the device pretends to
+ * support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ * Tell sd_mod to correct the last sector number reported by read_capacity.
+ * Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ * Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ * Instead of adding to the built-in blacklist, use only the workarounds
+ * specified in the module load parameter.
+ * Useful if a blacklist entry interfered with a non-broken device.
*/
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+ ", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+ ", 36 byte inquiry = " __stringify(SBP2_WORKAROUND_INQUIRY_36)
+ ", skip mode page 8 = " __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+ ", fix capacity = " __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+ ", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+ ", or a combination)");
+
+/* legacy parameter */
static int force_inquiry_hack;
module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
/*
* Export information about protocols/devices supported by this driver.
#endif
#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
+#define SBP2_DEBUG_ENTER() SBP2_DEBUG("%s", __FUNCTION__)
/*
* Globals
};
/*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device. It yields a few false positives
+ * but this did not break correctly behaving devices so far.
*/
-static u32 sbp2_broken_inquiry_list[] = {
- 0x00002800, /* Stefan Richter <stefanr@s5r6.in-berlin.de> */
- /* DViCO Momobay CX-1 */
- 0x00000200 /* Andreas Plesch <plesch@fas.harvard.edu> */
- /* QPS Fire DVDBurner */
+static const struct {
+ u32 firmware_revision;
+ u32 model_id;
+ unsigned workarounds;
+} sbp2_workarounds_table[] = {
+ /* TSB42AA9 */ {
+ .firmware_revision = 0x002800,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36 |
+ SBP2_WORKAROUND_MODE_SENSE_8,
+ },
+ /* Initio bridges, actually only needed for some older ones */ {
+ .firmware_revision = 0x000200,
+ .workarounds = SBP2_WORKAROUND_INQUIRY_36,
+ },
+ /* Symbios bridge */ {
+ .firmware_revision = 0xa0b800,
+ .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
+ },
+ /*
+ * Note about the following Apple iPod blacklist entries:
+ *
+ * There are iPods (2nd gen, 3rd gen) with model_id==0. Since our
+ * matching logic treats 0 as a wildcard, we cannot match this ID
+ * without rewriting the matching routine. Fortunately these iPods
+ * do not feature the read_capacity bug according to one report.
+ * Read_capacity behaviour as well as model_id could change due to
+ * Apple-supplied firmware updates though.
+ */
+ /* iPod 4th generation */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000021,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000023,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
+ /* iPod Photo */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x00007e,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ }
};
/**************************************
/*
* This function finds the sbp2_command for a given outstanding SCpnt.
* Only looks at the inuse list.
+ * Must be called with scsi_id->sbp2_command_orb_lock held.
*/
-static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(struct scsi_id_instance_data *scsi_id, void *SCpnt)
+static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(
+ struct scsi_id_instance_data *scsi_id, void *SCpnt)
{
struct sbp2_command_info *command;
- unsigned long flags;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) {
- list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) {
- if (command->Current_SCpnt == SCpnt) {
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ if (!list_empty(&scsi_id->sbp2_command_orb_inuse))
+ list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list)
+ if (command->Current_SCpnt == SCpnt)
return command;
- }
- }
- }
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
return NULL;
}
command->Current_SCpnt = Current_SCpnt;
list_add_tail(&command->list, &scsi_id->sbp2_command_orb_inuse);
} else {
- SBP2_ERR("sbp2util_allocate_command_orb - No orbs available!");
+ SBP2_ERR("%s: no orbs available", __FUNCTION__);
}
spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
return command;
struct hpsb_host *host;
if (!scsi_id) {
- printk(KERN_ERR "%s: scsi_id == NULL\n", __FUNCTION__);
+ SBP2_ERR("%s: scsi_id == NULL", __FUNCTION__);
return;
}
/*
* This function moves a command to the completed orb list.
+ * Must be called with scsi_id->sbp2_command_orb_lock held.
*/
-static void sbp2util_mark_command_completed(struct scsi_id_instance_data *scsi_id,
- struct sbp2_command_info *command)
+static void sbp2util_mark_command_completed(
+ struct scsi_id_instance_data *scsi_id,
+ struct sbp2_command_info *command)
{
- unsigned long flags;
-
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
list_del(&command->list);
sbp2util_free_command_dma(command);
list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed);
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
}
/*
struct unit_directory *ud;
struct scsi_id_instance_data *scsi_id;
- SBP2_DEBUG("sbp2_probe");
+ SBP2_DEBUG_ENTER();
ud = container_of(dev, struct unit_directory, device);
struct scsi_id_instance_data *scsi_id;
struct scsi_device *sdev;
- SBP2_DEBUG("sbp2_remove");
+ SBP2_DEBUG_ENTER();
ud = container_of(dev, struct unit_directory, device);
scsi_id = ud->device.driver_data;
{
struct scsi_id_instance_data *scsi_id = ud->device.driver_data;
- SBP2_DEBUG("sbp2_update");
+ SBP2_DEBUG_ENTER();
if (sbp2_reconnect_device(scsi_id)) {
struct Scsi_Host *scsi_host = NULL;
struct scsi_id_instance_data *scsi_id = NULL;
- SBP2_DEBUG("sbp2_alloc_device");
+ SBP2_DEBUG_ENTER();
scsi_id = kzalloc(sizeof(*scsi_id), GFP_KERNEL);
if (!scsi_id) {
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
- * target in order to support multi-unit devices. */
+ * target in order to support multi-unit devices.
+ * The FIFO is located out of the local host controller's physical range
+ * but, if possible, within the posted write area. Status writes will
+ * then be performed as unified transactions. This slightly reduces
+ * bandwidth usage, and some Prolific based devices seem to require it.
+ */
scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
- ~0ULL, ~0ULL);
- if (!scsi_id->status_fifo_addr) {
+ 0x010000000000ULL, CSR1212_ALL_SPACE_END);
+ if (scsi_id->status_fifo_addr == ~0ULL) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
struct sbp2scsi_host_info *hi = scsi_id->hi;
int error;
- SBP2_DEBUG("sbp2_start_device");
+ SBP2_DEBUG_ENTER();
/* Login FIFO DMA */
scsi_id->login_response =
* allows someone else to login instead. One second makes sense. */
msleep_interruptible(1000);
if (signal_pending(current)) {
- SBP2_WARN("aborting sbp2_start_device due to event");
sbp2_remove_device(scsi_id);
return -EINTR;
}
{
struct sbp2scsi_host_info *hi;
- SBP2_DEBUG("sbp2_remove_device");
+ SBP2_DEBUG_ENTER();
if (!scsi_id)
return;
int max_logins;
int active_logins;
- SBP2_DEBUG("sbp2_query_logins");
+ SBP2_DEBUG_ENTER();
scsi_id->query_logins_orb->reserved1 = 0x0;
scsi_id->query_logins_orb->reserved2 = 0x0;
scsi_id->query_logins_orb->query_response_lo = scsi_id->query_logins_response_dma;
scsi_id->query_logins_orb->query_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
- SBP2_DEBUG("sbp2_query_logins: query_response_hi/lo initialized");
scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST);
scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1);
scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
- SBP2_DEBUG("sbp2_query_logins: lun_misc initialized");
scsi_id->query_logins_orb->reserved_resp_length =
ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
- SBP2_DEBUG("sbp2_query_logins: reserved_resp_length initialized");
scsi_id->query_logins_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
- SBP2_DEBUG("sbp2_query_logins: orb byte-swapped");
-
sbp2util_packet_dump(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb),
"sbp2 query logins orb", scsi_id->query_logins_orb_dma);
memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response));
memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
- SBP2_DEBUG("sbp2_query_logins: query_logins_response/status FIFO memset");
-
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->query_logins_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
atomic_set(&scsi_id->sbp2_login_complete, 0);
- SBP2_DEBUG("sbp2_query_logins: prepared to write");
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
- SBP2_DEBUG("sbp2_query_logins: written");
if (sbp2util_down_timeout(&scsi_id->sbp2_login_complete, 2*HZ)) {
SBP2_INFO("Error querying logins to SBP-2 device - timed out");
struct sbp2scsi_host_info *hi = scsi_id->hi;
quadlet_t data[2];
- SBP2_DEBUG("sbp2_login_device");
+ SBP2_DEBUG_ENTER();
if (!scsi_id->login_orb) {
- SBP2_DEBUG("sbp2_login_device: login_orb not alloc'd!");
+ SBP2_DEBUG("%s: login_orb not alloc'd!", __FUNCTION__);
return -EIO;
}
/* Set-up login ORB, assume no password */
scsi_id->login_orb->password_hi = 0;
scsi_id->login_orb->password_lo = 0;
- SBP2_DEBUG("sbp2_login_device: password_hi/lo initialized");
scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma;
scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
- SBP2_DEBUG("sbp2_login_device: login_response_hi/lo initialized");
scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */
scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */
scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */
scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
- SBP2_DEBUG("sbp2_login_device: lun_misc initialized");
scsi_id->login_orb->passwd_resp_lengths =
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
- SBP2_DEBUG("sbp2_login_device: passwd_resp_lengths initialized");
scsi_id->login_orb->status_fifo_hi =
ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
scsi_id->login_orb->status_fifo_lo =
ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
- /*
- * Byte swap ORB if necessary
- */
sbp2util_cpu_to_be32_buffer(scsi_id->login_orb, sizeof(struct sbp2_login_orb));
- SBP2_DEBUG("sbp2_login_device: orb byte-swapped");
-
sbp2util_packet_dump(scsi_id->login_orb, sizeof(struct sbp2_login_orb),
"sbp2 login orb", scsi_id->login_orb_dma);
- /*
- * Initialize login response and status fifo
- */
memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response));
memset(&scsi_id->status_block, 0, sizeof(struct sbp2_status_block));
- SBP2_DEBUG("sbp2_login_device: login_response/status FIFO memset");
-
- /*
- * Ok, let's write to the target's management agent register
- */
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
data[1] = scsi_id->login_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
atomic_set(&scsi_id->sbp2_login_complete, 0);
- SBP2_DEBUG("sbp2_login_device: prepared to write to %08x",
- (unsigned int)scsi_id->sbp2_management_agent_addr);
hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
- SBP2_DEBUG("sbp2_login_device: written");
/*
* Wait for login status (up to 20 seconds)...
quadlet_t data[2];
int error;
- SBP2_DEBUG("sbp2_logout_device");
+ SBP2_DEBUG_ENTER();
/*
* Set-up logout ORB
quadlet_t data[2];
int error;
- SBP2_DEBUG("sbp2_reconnect_device");
+ SBP2_DEBUG_ENTER();
/*
* Set-up reconnect ORB
{
quadlet_t data;
- SBP2_DEBUG("sbp2_set_busy_timeout");
+ SBP2_DEBUG_ENTER();
- /*
- * Ok, let's write to the target's busy timeout register
- */
data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE);
-
- if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4)) {
- SBP2_ERR("sbp2_set_busy_timeout error");
- }
-
+ if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4))
+ SBP2_ERR("%s error", __FUNCTION__);
return 0;
}
struct csr1212_dentry *dentry;
u64 management_agent_addr;
u32 command_set_spec_id, command_set, unit_characteristics,
- firmware_revision, workarounds;
+ firmware_revision;
+ unsigned workarounds;
int i;
- SBP2_DEBUG("sbp2_parse_unit_directory");
+ SBP2_DEBUG_ENTER();
management_agent_addr = 0x0;
command_set_spec_id = 0x0;
case SBP2_FIRMWARE_REVISION_KEY:
/* Firmware revision */
firmware_revision = kv->value.immediate;
- if (force_inquiry_hack)
- SBP2_INFO("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
- else
- SBP2_DEBUG("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
+ SBP2_DEBUG("sbp2_firmware_revision = %x",
+ (unsigned int)firmware_revision);
break;
default:
}
}
- /* This is the start of our broken device checking. We try to hack
- * around oddities and known defects. */
- workarounds = 0x0;
+ workarounds = sbp2_default_workarounds;
+ if (force_inquiry_hack) {
+ SBP2_WARN("force_inquiry_hack is deprecated. "
+ "Use parameter 'workarounds' instead.");
+ workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+ }
- /* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
- * bridge with 128KB max transfer size limitation. For sanity, we
- * only voice this when the current max_sectors setting
- * exceeds the 128k limit. By default, that is not the case.
- *
- * It would be really nice if we could detect this before the scsi
- * host gets initialized. That way we can down-force the
- * max_sectors to account for it. That is not currently
- * possible. */
- if ((firmware_revision & 0xffff00) ==
- SBP2_128KB_BROKEN_FIRMWARE &&
- (max_sectors * 512) > (128*1024)) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
- max_sectors);
- workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
- }
-
- /* Check for a blacklisted set of devices that require us to force
- * a 36 byte host inquiry. This can be overriden as a module param
- * (to force all hosts). */
- for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
- if ((firmware_revision & 0xffff00) ==
- sbp2_broken_inquiry_list[i]) {
- SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
- NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
- workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
- break; /* No need to continue. */
+ if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+ for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+ if (sbp2_workarounds_table[i].firmware_revision &&
+ sbp2_workarounds_table[i].firmware_revision !=
+ (firmware_revision & 0xffff00))
+ continue;
+ if (sbp2_workarounds_table[i].model_id &&
+ sbp2_workarounds_table[i].model_id != ud->model_id)
+ continue;
+ workarounds |= sbp2_workarounds_table[i].workarounds;
+ break;
}
- }
+
+ if (workarounds)
+ SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+ "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+ " model_id 0x%06x)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ workarounds, firmware_revision,
+ ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+ ud->model_id);
+
+ /* We would need one SCSI host template for each target to adjust
+ * max_sectors on the fly, therefore warn only. */
+ if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+ "max transfer size. WARNING: Current max_sectors "
+ "setting is larger than 128KB (%d sectors)",
+ NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+ max_sectors);
/* If this is a logical unit directory entry, process the parent
* to get the values. */
{
struct sbp2scsi_host_info *hi = scsi_id->hi;
- SBP2_DEBUG("sbp2_max_speed_and_size");
+ SBP2_DEBUG_ENTER();
/* Initial setting comes from the hosts speed map */
scsi_id->speed_code =
u64 addr;
int retval;
- SBP2_DEBUG("sbp2_agent_reset");
+ SBP2_DEBUG_ENTER();
- /*
- * Ok, let's write to the target's management agent register
- */
data = ntohl(SBP2_AGENT_RESET_DATA);
addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
unsigned int request_bufflen = SCpnt->request_bufflen;
struct sbp2_command_info *command;
- SBP2_DEBUG("sbp2_send_command");
-#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
- printk("[scsi command]\n ");
- scsi_print_command(SCpnt);
-#endif
+ SBP2_DEBUG_ENTER();
SBP2_DEBUG("SCSI transfer size = %x", request_bufflen);
SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg);
*/
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data)
{
- SBP2_DEBUG("sbp2_status_to_sense_data");
+ SBP2_DEBUG_ENTER();
/*
* Ok, it's pretty ugly... ;-)
{
u8 *scsi_buf = SCpnt->request_buffer;
- SBP2_DEBUG("sbp2_check_sbp2_response");
+ SBP2_DEBUG_ENTER();
if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
/*
struct sbp2_command_info *command;
unsigned long flags;
- SBP2_DEBUG("sbp2_handle_status_write");
+ SBP2_DEBUG_ENTER();
sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr);
* Matched status with command, now grab scsi command pointers and check status
*/
SCpnt = command->Current_SCpnt;
+ spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
sbp2util_mark_command_completed(scsi_id, command);
+ spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
if (SCpnt) {
struct sbp2scsi_host_info *hi;
int result = DID_NO_CONNECT << 16;
- SBP2_DEBUG("sbp2scsi_queuecommand");
+ SBP2_DEBUG_ENTER();
+#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
+ scsi_print_command(SCpnt);
+#endif
if (!sbp2util_node_is_available(scsi_id))
goto done;
struct sbp2_command_info *command;
unsigned long flags;
- SBP2_DEBUG("sbp2scsi_complete_all_commands");
+ SBP2_DEBUG_ENTER();
spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
while (!list_empty(&scsi_id->sbp2_command_orb_inuse)) {
u32 scsi_status, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- SBP2_DEBUG("sbp2scsi_complete_command");
+ SBP2_DEBUG_ENTER();
/*
* Sanity
case SBP2_SCSI_STATUS_CHECK_CONDITION:
SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16;
-
- /*
- * Debug stuff
- */
#if CONFIG_IEEE1394_SBP2_DEBUG >= 1
scsi_print_command(SCpnt);
- scsi_print_sense("bh", SCpnt);
+ scsi_print_sense(SBP2_DEVICE_NAME, SCpnt);
#endif
-
break;
case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
scsi_id->sdev = sdev;
- if (force_inquiry_hack ||
- scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+ if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
- sdev->skip_ms_page_8 = 1;
- }
return 0;
}
static int sbp2scsi_slave_configure(struct scsi_device *sdev)
{
+ struct scsi_id_instance_data *scsi_id =
+ (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
+
+ if (sdev->type == TYPE_DISK &&
+ scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+ sdev->skip_ms_page_8 = 1;
+ if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+ sdev->fix_capacity = 1;
return 0;
}
(struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
struct sbp2scsi_host_info *hi = scsi_id->hi;
struct sbp2_command_info *command;
+ unsigned long flags;
SBP2_ERR("aborting sbp2 command");
scsi_print_command(SCpnt);
* Right now, just return any matching command structures
* to the free pool.
*/
+ spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
command = sbp2util_find_command_for_SCpnt(scsi_id, SCpnt);
if (command) {
SBP2_DEBUG("Found command to abort");
command->Current_done(command->Current_SCpnt);
}
}
+ spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
/*
* Initiate a fetch agent reset.
{
int ret;
- SBP2_DEBUG("sbp2_module_init");
+ SBP2_DEBUG_ENTER();
/* Module load debug option to force one command at a time (serializing I/O) */
if (serialize_io) {
scsi_driver_template.cmd_per_lun = 1;
}
- /* Set max sectors (module load option). Default is 255 sectors. */
+ if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+ (max_sectors * 512) > (128 * 1024))
+ max_sectors = 128 * 1024 / 512;
scsi_driver_template.max_sectors = max_sectors;
/* Register our high level driver with 1394 stack */
static void __exit sbp2_module_exit(void)
{
- SBP2_DEBUG("sbp2_module_exit");
+ SBP2_DEBUG_ENTER();
hpsb_unregister_protocol(&sbp2_driver);