ide: filter out "default" transfer mode values in set_xfer_rate()

[linux-2.6] / drivers / ide / pci / tc86c001.c

diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 9b4b27a4c71121c30298052a30c653f5ccffee05..477e1979010230d4f1662af093b535520d9ccd95 100644 (file)
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -63,7 +63,7 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
        ide_hwif_t *hwif        = HWIF(drive);
        ide_expiry_t *expiry    = ide_get_hwifdata(hwif);
        ide_hwgroup_t *hwgroup  = HWGROUP(drive);
-       u8 dma_stat             = inb(hwif->dma_status);
+       u8 dma_stat             = inb(hwif->dma_base + ATA_DMA_STATUS);
 
        /* Restore a higher level driver's expiry handler first. */
        hwgroup->expiry = expiry;
@@ -71,21 +71,24 @@ static int tc86c001_timer_expiry(ide_drive_t *drive)
        if ((dma_stat & 5) == 1) {      /* DMA active and no interrupt */
                unsigned long sc_base   = hwif->config_data;
                unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
-               u8 dma_cmd              = inb(hwif->dma_command);
+               u8 dma_cmd              = inb(hwif->dma_base + ATA_DMA_CMD);
 
                printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
                       "attempting recovery...\n", drive->name);
 
                /* Stop DMA */
-               outb(dma_cmd & ~0x01, hwif->dma_command);
+               outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
 
                /* Setup the dummy DMA transfer */
                outw(0, sc_base + 0x0a);        /* Sector Count */
                outw(0, twcr_port);     /* Transfer Word Count 1 or 2 */
 
                /* Start the dummy DMA transfer */
-               outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
-               outb(0x01, hwif->dma_command); /* set START_STOPBM */
+
+               /* clear R_OR_WCTR for write */
+               outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+               /* set START_STOPBM */
+               outb(0x01, hwif->dma_base + ATA_DMA_CMD);
 
                /*
                 * If an interrupt was pending, it should come thru shortly.
@@ -203,8 +206,7 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
        .init_hwif      = init_hwif_tc86c001,
        .port_ops       = &tc86c001_port_ops,
        .dma_ops        = &tc86c001_dma_ops,
-       .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
-                         IDE_HFLAG_ABUSE_SET_DMA_MODE,
+       .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
        .pio_mask       = ATA_PIO4,
        .mwdma_mask     = ATA_MWDMA2,
        .udma_mask      = ATA_UDMA4,