u16 mode, scr = inw(scr_port);
switch (speed) {
- case XFER_UDMA_4: mode = 0x00c0; break;
- case XFER_UDMA_3: mode = 0x00b0; break;
- case XFER_UDMA_2: mode = 0x00a0; break;
- case XFER_UDMA_1: mode = 0x0090; break;
- case XFER_UDMA_0: mode = 0x0080; break;
- case XFER_MW_DMA_2: mode = 0x0070; break;
- case XFER_MW_DMA_1: mode = 0x0060; break;
- case XFER_MW_DMA_0: mode = 0x0050; break;
- case XFER_PIO_4: mode = 0x0400; break;
- case XFER_PIO_3: mode = 0x0300; break;
- case XFER_PIO_2: mode = 0x0200; break;
- case XFER_PIO_1: mode = 0x0100; break;
- case XFER_PIO_0:
- default: mode = 0x0000; break;
+ case XFER_UDMA_4: mode = 0x00c0; break;
+ case XFER_UDMA_3: mode = 0x00b0; break;
+ case XFER_UDMA_2: mode = 0x00a0; break;
+ case XFER_UDMA_1: mode = 0x0090; break;
+ case XFER_UDMA_0: mode = 0x0080; break;
+ case XFER_MW_DMA_2: mode = 0x0070; break;
+ case XFER_MW_DMA_1: mode = 0x0060; break;
+ case XFER_MW_DMA_0: mode = 0x0050; break;
+ case XFER_PIO_4: mode = 0x0400; break;
+ case XFER_PIO_3: mode = 0x0300; break;
+ case XFER_PIO_2: mode = 0x0200; break;
+ case XFER_PIO_1: mode = 0x0100; break;
+ case XFER_PIO_0:
+ default: mode = 0x0000; break;
}
scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
ide_hwif_t *hwif = HWIF(drive);
ide_expiry_t *expiry = ide_get_hwifdata(hwif);
ide_hwgroup_t *hwgroup = HWGROUP(drive);
- u8 dma_stat = inb(hwif->dma_status);
+ u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* Restore a higher level driver's expiry handler first. */
hwgroup->expiry = expiry;
if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
unsigned long sc_base = hwif->config_data;
unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- u8 dma_cmd = inb(hwif->dma_command);
+ u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
"attempting recovery...\n", drive->name);
/* Stop DMA */
- outb(dma_cmd & ~0x01, hwif->dma_command);
+ outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
/* Setup the dummy DMA transfer */
outw(0, sc_base + 0x0a); /* Sector Count */
outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
/* Start the dummy DMA transfer */
- outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
- outb(0x01, hwif->dma_command); /* set START_STOPBM */
+
+ /* clear R_OR_WCTR for write */
+ outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+ /* set START_STOPBM */
+ outb(0x01, hwif->dma_base + ATA_DMA_CMD);
/*
* If an interrupt was pending, it should come thru shortly.
/* Store the system control register base for convenience... */
hwif->config_data = sc_base;
- hwif->set_pio_mode = &tc86c001_set_pio_mode;
- hwif->set_dma_mode = &tc86c001_set_mode;
-
- hwif->cable_detect = tc86c001_cable_detect;
-
if (!hwif->dma_base)
return;
/* Sector Count Register limit */
hwif->rqsize = 0xffff;
-
- hwif->dma_start = &tc86c001_dma_start;
}
static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
return err;
}
+static const struct ide_port_ops tc86c001_port_ops = {
+ .set_pio_mode = tc86c001_set_pio_mode,
+ .set_dma_mode = tc86c001_set_mode,
+ .cable_detect = tc86c001_cable_detect,
+};
+
+static const struct ide_dma_ops tc86c001_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = tc86c001_dma_start,
+ .dma_end = __ide_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+};
+
static const struct ide_port_info tc86c001_chipset __devinitdata = {
.name = "TC86C001",
.init_chipset = init_chipset_tc86c001,
.init_hwif = init_hwif_tc86c001,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
- IDE_HFLAG_ABUSE_SET_DMA_MODE,
+ .port_ops = &tc86c001_port_ops,
+ .dma_ops = &tc86c001_dma_ops,
+ .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,