]> err.no Git - linux-2.6/blobdiff - drivers/ide/pci/slc90e66.c
x86: add MAP_STACK mmap flag
[linux-2.6] / drivers / ide / pci / slc90e66.c
index ae8e9132457773130336b02ac9110227bc595110..866d6c65e3a0bf02e63d1c9f131b06dde7af3542 100644 (file)
@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c   Version 0.16    Jul 14, 2007
- *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
  *
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
-#include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
-static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
-       switch(xfer_rate) {
-               case XFER_UDMA_4:
-               case XFER_UDMA_3:
-               case XFER_UDMA_2:
-               case XFER_UDMA_1:
-               case XFER_UDMA_0:
-               case XFER_MW_DMA_2:
-                       return 4;
-               case XFER_MW_DMA_1:
-                       return 3;
-               case XFER_SW_DMA_2:
-                       return 2;
-               case XFER_MW_DMA_0:
-               case XFER_SW_DMA_1:
-               case XFER_SW_DMA_0:
-               default:
-                       return 0;
-       }
-}
+#define DRV_NAME "slc90e66"
+
+static DEFINE_SPINLOCK(slc90e66_lock);
 
-static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
+static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
 {
        ide_hwif_t *hwif        = HWIF(drive);
-       struct pci_dev *dev     = hwif->pci_dev;
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
        int is_slave            = drive->dn & 1;
        int master_port         = hwif->channel ? 0x42 : 0x40;
        int slave_port          = 0x44;
        unsigned long flags;
        u16 master_data;
        u8 slave_data;
-       int control = 0;
+       int control = 0;
                                     /* ISP  RTC */
-       static const u8 timings[][2]= {
+       static const u8 timings[][2] = {
                                        { 0, 0 },
                                        { 0, 0 },
                                        { 1, 0 },
                                        { 2, 1 },
                                        { 2, 3 }, };
 
-       spin_lock_irqsave(&ide_lock, flags);
+       spin_lock_irqsave(&slc90e66_lock, flags);
        pci_read_config_word(dev, master_port, &master_data);
 
        if (pio > 1)
@@ -92,19 +69,13 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
        pci_write_config_word(dev, master_port, master_data);
        if (is_slave)
                pci_write_config_byte(dev, slave_port, slave_data);
-       spin_unlock_irqrestore(&ide_lock, flags);
-}
-
-static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-       slc90e66_tune_pio(drive, pio);
-       (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+       spin_unlock_irqrestore(&slc90e66_lock, flags);
 }
 
-static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
+static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
 {
        ide_hwif_t *hwif        = HWIF(drive);
-       struct pci_dev *dev     = hwif->pci_dev;
+       struct pci_dev *dev     = to_pci_dev(hwif->dev);
        u8 maslave              = hwif->channel ? 0x42 : 0x40;
        int sitre = 0, a_speed  = 7 << (drive->dn * 4);
        int u_speed = 0, u_flag = 1 << drive->dn;
@@ -116,19 +87,9 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
        pci_read_config_word(dev, 0x48, &reg48);
        pci_read_config_word(dev, 0x4a, &reg4a);
 
-       switch(speed) {
-               case XFER_UDMA_4:       u_speed = 4 << (drive->dn * 4); break;
-               case XFER_UDMA_3:       u_speed = 3 << (drive->dn * 4); break;
-               case XFER_UDMA_2:       u_speed = 2 << (drive->dn * 4); break;
-               case XFER_UDMA_1:       u_speed = 1 << (drive->dn * 4); break;
-               case XFER_UDMA_0:       u_speed = 0 << (drive->dn * 4); break;
-               case XFER_MW_DMA_2:
-               case XFER_MW_DMA_1:
-               case XFER_SW_DMA_2:     break;
-               default:                return -1;
-       }
-
        if (speed >= XFER_UDMA_0) {
+               u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
+
                if (!(reg48 & u_flag))
                        pci_write_config_word(dev, 0x48, reg48|u_flag);
                /* FIXME: (reg4a & a_speed) ? */
@@ -138,84 +99,58 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
                        pci_write_config_word(dev, 0x4a, reg4a|u_speed);
                }
        } else {
+               const u8 mwdma_to_pio[] = { 0, 3, 4 };
+               u8 pio;
+
                if (reg48 & u_flag)
                        pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
                if (reg4a & a_speed)
                        pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-       }
 
-       slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+               if (speed >= XFER_MW_DMA_0)
+                       pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+               else
+                       pio = 2; /* only SWDMA2 is allowed */
 
-       return ide_config_drive_speed(drive, speed);
+               slc90e66_set_pio_mode(drive, pio);
+       }
 }
 
-static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
+static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
 {
-       drive->init_speed = 0;
-
-       if (ide_tune_dma(drive))
-               return 0;
+       struct pci_dev *dev = to_pci_dev(hwif->dev);
+       u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
 
-       if (ide_use_fast_pio(drive))
-               ide_set_max_pio(drive);
+       pci_read_config_byte(dev, 0x47, &reg47);
 
-       return -1;
+       /* bit[0(1)]: 0:80, 1:40 */
+       return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 }
 
-static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
-{
-       u8 reg47 = 0;
-       u8 mask = hwif->channel ? 0x01 : 0x02;  /* bit0:Primary */
-
-       hwif->autodma = 0;
-
-       if (!hwif->irq)
-               hwif->irq = hwif->channel ? 15 : 14;
-
-       hwif->speedproc = &slc90e66_tune_chipset;
-       hwif->set_pio_mode = &slc90e66_set_pio_mode;
-
-       pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
-
-       if (!hwif->dma_base) {
-               hwif->drives[0].autotune = 1;
-               hwif->drives[1].autotune = 1;
-               return;
-       }
-
-       hwif->atapi_dma = 1;
-       hwif->ultra_mask = 0x1f;
-       hwif->mwdma_mask = 0x06;
-       hwif->swdma_mask = 0x04;
-
-       if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-               /* bit[0(1)]: 0:80, 1:40 */
-               hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
-       hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
-
-       if (!noautodma)
-               hwif->autodma = 1;
-       hwif->drives[0].autodma = hwif->autodma;
-       hwif->drives[1].autodma = hwif->autodma;
-}
+static const struct ide_port_ops slc90e66_port_ops = {
+       .set_pio_mode           = slc90e66_set_pio_mode,
+       .set_dma_mode           = slc90e66_set_dma_mode,
+       .cable_detect           = slc90e66_cable_detect,
+};
 
-static ide_pci_device_t slc90e66_chipset __devinitdata = {
-       .name           = "SLC90E66",
-       .init_hwif      = init_hwif_slc90e66,
-       .autodma        = AUTODMA,
-       .enablebits     = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
-       .bootable       = ON_BOARD,
+static const struct ide_port_info slc90e66_chipset __devinitdata = {
+       .name           = DRV_NAME,
+       .enablebits     = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
+       .port_ops       = &slc90e66_port_ops,
+       .host_flags     = IDE_HFLAG_LEGACY_IRQS,
        .pio_mask       = ATA_PIO4,
+       .swdma_mask     = ATA_SWDMA2_ONLY,
+       .mwdma_mask     = ATA_MWDMA12_ONLY,
+       .udma_mask      = ATA_UDMA4,
 };
 
 static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       return ide_setup_pci_device(dev, &slc90e66_chipset);
+       return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
 }
 
-static struct pci_device_id slc90e66_pci_tbl[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0},
+static const struct pci_device_id slc90e66_pci_tbl[] = {
+       { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
        { 0, },
 };
 MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
@@ -224,6 +159,7 @@ static struct pci_driver driver = {
        .name           = "SLC90e66_IDE",
        .id_table       = slc90e66_pci_tbl,
        .probe          = slc90e66_init_one,
+       .remove         = ide_pci_remove,
 };
 
 static int __init slc90e66_ide_init(void)
@@ -231,7 +167,13 @@ static int __init slc90e66_ide_init(void)
        return ide_pci_register_driver(&driver);
 }
 
+static void __exit slc90e66_ide_exit(void)
+{
+       pci_unregister_driver(&driver);
+}
+
 module_init(slc90e66_ide_init);
+module_exit(slc90e66_ide_exit);
 
 MODULE_AUTHOR("Andre Hedrick");
 MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");