/*
* Set timing for this drive:
*/
- outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]);
- (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]);
+ outb(timing, hwif->io_ports.device_addr);
+ (void)inb(hwif->io_ports.status_addr);
#ifdef DEBUG
printk("ht6560b: %s: select=%#x timing=%#x\n",
drive->name, select, timing);
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
- int bus_speed = system_bus_clock();
-
+ int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
+
if (pio) {
unsigned int cycle_time;
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
cycle_time = ide_pio_cycle_time(drive, pio);
* actual cycle time for recovery and activity
* according system bus speed.
*/
- active_time = ide_pio_timings[pio].active_time;
- recovery_time = cycle_time
- - active_time
- - ide_pio_timings[pio].setup_time;
+ active_time = t->active;
+ recovery_time = cycle_time - active_time - t->setup;
/*
* Cycle times should be Vesa bus cycles
*/
#endif
}
-static void __init ht6560b_port_init_devs(ide_hwif_t *hwif)
+static void __init ht6560b_init_dev(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
/* Setting default configurations for drives. */
int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
if (hwif->channel)
t |= (HT_SECONDARY_IF << 8);
- hwif->drives[0].drive_data = t;
- hwif->drives[1].drive_data = t;
+ drive->drive_data = t;
}
-int probe_ht6560b = 0;
+static int probe_ht6560b;
module_param_named(probe, probe_ht6560b, bool, 0);
MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
+static const struct ide_port_ops ht6560b_port_ops = {
+ .init_dev = ht6560b_init_dev,
+ .set_pio_mode = ht6560b_set_pio_mode,
+ .selectproc = ht6560b_selectproc,
+};
+
static const struct ide_port_info ht6560b_port_info __initdata = {
+ .name = DRV_NAME,
.chipset = ide_ht6560b,
+ .port_ops = &ht6560b_port_ops,
.host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */
IDE_HFLAG_NO_DMA |
- IDE_HFLAG_NO_AUTOTUNE |
IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO4,
};
static int __init ht6560b_init(void)
{
- ide_hwif_t *hwif, *mate;
- static u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- hw_regs_t hw[2];
-
if (probe_ht6560b == 0)
return -ENODEV;
if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) {
printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n",
- __FUNCTION__);
+ __func__);
return -ENODEV;
}
if (!try_to_init_ht6560b()) {
- printk(KERN_NOTICE "%s: HBA not found\n", __FUNCTION__);
+ printk(KERN_NOTICE "%s: HBA not found\n", __func__);
goto release_region;
}
- memset(&hw, 0, sizeof(hw));
-
- ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
- hw[0].irq = 14;
-
- ide_std_init_ports(&hw[1], 0x170, 0x376);
- hw[1].irq = 15;
-
- hwif = ide_find_port();
- if (hwif) {
- ide_init_port_hw(hwif, &hw[0]);
- hwif->selectproc = ht6560b_selectproc;
- hwif->set_pio_mode = ht6560b_set_pio_mode;
- hwif->port_init_devs = ht6560b_port_init_devs;
- idx[0] = hwif->index;
- }
-
- mate = ide_find_port();
- if (mate) {
- ide_init_port_hw(mate, &hw[1]);
- mate->selectproc = ht6560b_selectproc;
- mate->set_pio_mode = ht6560b_set_pio_mode;
- mate->port_init_devs = ht6560b_port_init_devs;
- idx[1] = mate->index;
- }
-
- ide_device_add(idx, &ht6560b_port_info);
-
- return 0;
+ return ide_legacy_device_add(&ht6560b_port_info, 0);
release_region:
release_region(HT_CONFIG_PORT, 1);